F1300C Series 3.3V FR-4 Surface Mount Crystal Clock Oscillators FR-4 Based SMT 65MHz to 105MHz Frequency Range -10oC to 70oC Operating Temperature ”M” Models Operate from -40oC to 85oC 40/60% Symmetry Standard 45/55% Available OBSOLETE ±100ppm Stability Standard Tighter Stabilities Available ±20ppm Stability:- Contact Factory ±25ppm Stability: F1325C ±50ppm Stability: F1350C Hermetically Sealed Crystal for Predictable Long Term Aging & Reliability Tri-State Output Standard E L E C T R I C A L S P E C I F I C AT I O N S MODEL F1300C Frequency Range (MHz) 65 to 105 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging -10°C to 70°C ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -40°C to +85°C Supply Voltage (V) +3.3 ±5% Supply Current (mA) <30 Output Specifications Output CMOS “0” Level (VOL) 0.9 VCC “1” Level (VOH) 0.1 VCC Load 15pF TR & TF (ns) <3 (20 - 80% VCC) Symmetry (%) 40/60 @ 0.5VCC Jitter (Typical) 5ps RMS @ 100MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E F13XXCXX - Specify Frequency “Blank” = -10oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55 Symmetry “25” = ±25ppm (-10 to 70C only) “50” = ±50ppm “00” = ±100ppm 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 800-888-1499 or www.champtech.com 1 Fax: 847.451.7585 F1300C Series 3.3V FR-4 Surface Mount Crystal Clock Oscillators PIN FUNCTION 1 Tri-State 2 Ground 3 Output 4 + VCC OBSOLETE OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 800-888-1499 or www.champtech.com 2 Fax: 847.451.7585