Solid State High Power Amplifier 1.0 – 6.0 GHz, Wide Instantaneous Bandwidth, Built-in protection Broadband Series: PA1044 FEATURES Command and control. Class AB GaN design 1.0 – 6.0 GHz Supports all modulation standards 100 Watt output power 50 dB gain 28 Volt operation Protecting troops and civilians alike from harm. Fully protected – load VSWR, input overdrive, over/under supply voltage, overcurrent Available as a module or rack mounted APPLICATIONS Broadband jamming LTE laboratory test equipment Controlling the field on the ground often means keeping dangerous trigger signals out of play. The MtronPTI PA1044 Solid State Power Amp provides 100 Watts of CW power and better than 3.0 dBP-P gain flatness to meet the needs of broadband communication suppression. Covering all modulation standards from 1.0 to 6.0 GHz and with built in VSWR protection, the PA1044 has 50 dB of gain, perfect for vehicle mounted applications. MtronPTI’s line of Solid State Power Amplifiers is backed by a multi-national design and manufacturing team with more than 150 years combined PA design experience. MtronPTI’s continuing focus on client service ensures full program life engineering support from specification to production to next generation architecture planning. The PA1044 is available in 48 volt or 28 volt options and can be integrated into custom assemblies with filters or other passive components. U.S. Army photo by Sgt. Derec Pierson. (RELEASED)) Copyright © 2014 MtronPTI. All rights reserved. Rev. 20141118 | Page 1 of 3 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 PA1044 Data Sheet Electrical Characteristics Parameter PASSBAND Operating Frequency Range Power Output Power Output @ P1dB Power Gain Power Gain Flatness Input / Output Return Loss 2-Tone_Intermodulation (IMD) Harmonics Non Harmonic Spurious Power Operating Voltage Power Consumption Max Input Power Load VSWR Protection Turn On / Off Speed Symbol Min. FCARRIER POUT_MIN 1 100 TBD 50 Typ. Max. Units 6 -60 GHz Watts Watts dB dBP-P dB dBc dBc dBc 670 +8 VDC Watt dBm 5 µSec Max. +75 +85 95 Units °C °C % mm Kg 3.0 RLIN 10 -30 -20 VDD 48 PIN_MIN Comment CW CW Peak to peak across the band Relative to 50Ω 40 dBm / Tone, ∆ = 1 MHz At rated POUT 28 volt option available At rated POUT Without damage ∞:1 Environmental & Physical Parameter Operating Case Temperature Storage Temperature Relative Humidity Dimensions Weight RF Connectors IN / OUT DC Power / Interface Connector Cooling D-Sub Connector Pin Assignments 1 2 3 4 5 A1 A2 Symbol TOC TSTR Min. -20 -40 5 Typ. 360 x 220 x 27 TBD SMA Female 7-pin Hybrid D-Sub External Heat Sink FWD VVA Current Sensor Temperature Sensor Shutdown VDD GND Comment Non-condensing Excluding connectors Cover Flange Forced air required OPTION 101 – Forward power detect OPTION 103 – Variable Voltage Attenuator ID @ 20 mV / 100 mA typ. VT @ 10 mV / °C + 500 mV typ. TTL 28 VDC Ground Ordering Information Option 101 103 108 Function FWD VVA V28 Description Forward power detect Variable Voltage Attenuator +28 VDC Operation Rev. 20141118 | Page 2 of 3 PA1044 Data Sheet Case Outline – Standard Module Case Outline – Option 108 (28 V Operation) Revision History Date 20141118 Rev. A Orig. DPD Details of Revision Initial release in 2015 format Information provided by MtronPTI is believed to be accurate and reliable. However, no responsibility is assumed by MtronPTI for its use nor for any infringements or patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MtronPTI. MtronPTI may change specifications without notice to improve end application performance or product manufacturability. Contact MtronPTI for the most up-to-date information. Copyright © 2014 MtronPTI. All rights reserved. Rev. 20141118 | Page 3 of 3 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000