Oscilent Corporation | 266 Series Quartz Crystal 1 of 1 SMD Quartz Crystal Series Number Package Description Last Modified 266 5x3.2mm Chip Type SMD Quartz Crystal July 28 2008 FEATURES - 5x3.2mm Chip Type quartz crystal - Low profile - Tight stability / High reliability - Cost Efficient - Tape and Reel - RoHS / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CHARACTERISTICS Frequency Range Frequency Tolerance Frequency Stability UNITS fo 12.00 ~ 40.00 MHz @ 25ºC ±30 ppm ppm Ta = -20 +70ºC ±50 Operating Temperature TOPR -20 ~ +70 ºC Storage Temperature TSTG -40 ~ +85 ºC Shunt Capacitance Co 7.0 max. pF Load Capacitance CL (Customer Specified) 18 ~ 30, Series pF . EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 12.000 ~ 14.399 Fundamental 80 14.400 ~ 40.000 Fundamental 50 . PART NUMBER GUIDE Series Number Frequency Load Capacitance Operating Temp ( ºC ) 266 - 12.0M - 20 -S Oscilent Enter frequency e.g. 12.0M Enter capacitance e.g. -20 for 12.000 MHz for 20pF . Enter -SR for Series Resonance. S= -20~+70 Packaging** - TR Blank* = Bulk TR = Tape/Reel NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Series No.: 266