J.EIIE.Ut/ <^>£.mi-L,onau.ctoi C/ On*. TELEPHONE: (973) 376-2922 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. (212)227-6005 FAX: (973) 376-8960 SA5.0C-SA170CA BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 200 Volts PPK : 500 Watts DO-41 T FEATURES: * * * * 500W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(mjn ( * Typical IR less then 1|iA above 10V * Pb / RoHS Free 0(2! 0.107 (2.74) 0.080 (2.03) - MIN. MIN \) 0.205 (5.20) 0.160(4.10) \! 1.00(25.4) MIN. MIN. 0.034 (0.86) 0.028(0.71) MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Mounting position : Any * Weight: 0.339 gram _L Dimensions in inches and (millimeters) DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without "C" Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Notel) Symbol Value Unit PPK Minimum 500 w PD 3.0 w TJ, TSTG - 6 5 t o + 175 °c Steady State Power Dissipation at Tu = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Operating and Storage Temperature Range Note : (1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 °C per Fig. 1 NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However. NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It Working Peak ( Note 1 ) TYPE VBR (V) Min. SA5.0C SA5.0CA SA6.0C SA6.0CA SA6.5C SA6.5CA SA7.0C SA7.0CA SA7.5C SA7.5CA SA8.0C SA8.0CA SA8.5C SA8.5CA SA9.0C SA9.0CA SA10C SA10CA SA11C SA11CA SA12C SA12CA SA13C SA13CA SA14C SA14CA SA15C SA15CA SA16C SA16CA SA17C SA17CA SA18C SA18CA SA20C SA20CA SA22C SA22CA SA24C SA24CA SA26C SA26CA SA28C SA28CA SA30C SA30CA SA33C SA33CA 6.40 6.40 6.67 6.67 7.22 7.22 7.78 Max. It (mA) Maximum @ VRWM IK Maximum Reverse Current IRSM Voltage @ IRSM VRSM Voltage Temperature Variation of VBR (V) (nA) (A) (V) (mV/°C) 1200 1200 52.0 54.3 43.9 48.5 40.7 44.7 37.8 41.7 13.3 12.0 35.0 38.8 14.3 12.9 7.0 33.3 36.7 31.4 34.7 15.0 7.0 13.6 15.9 14.4 7.0 29.5 32.5 26.6 29.4 16.9 15.4 9.0 18.8 17.0 20.1 18.2 10.0 Reverse Reverse Leakage Voltage VRWM 7.3 10 5.0 7.25 8.15 10 5.0 10 6.0 7.37 8.82 10 6.0 1200 1200 10 6.5 800 7.98 9.51 10 6.5 800 10 7.0 300 7.78 8.33 8.60 10.2 10 7.0 300 1.0 7.5 100 8.33 8.89 9.21 10.9 1.0 7.5 100 1.0 8.0 50 8.89 9.44 9.30 11.5 10.4 12.2 11.1 13.6 1.0 8.0 50 1.0 8.5 10 1.0 8.5 10 1.0 9.0 2.0 1.0 9.0 2.0 1.0 10.0 10.0 11.0 2.0 11.0 12.0 1.0 1.0 1.0 12.0 1.0 1.0 13.0 13.0 14.0 1.0 14.0 15.0 1.0 15.0 16.0 1.0 16.0 17.0 1.0 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 12.3 14.9 1.0 1.0 13.5 16.3 14.7 17.6 1.0 15.9 19.1 17.2 20.4 1.0 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 18.5 21.8 19.7 23.1 20.9 24.4 1.0 22.1 27.1 1.0 22.2 24.4 24.4 1.0 28.9 24.5 29.8 26.9 32.6 29.5 35.3 28.9 31.1 31.9 38.0 31.1 33.3 33.3 36.7 36.7 34.4 40.7 1.0 36.8 44.9 1.0 40.6 1.0 26.7 26.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 24.9 27.4 22.7 25.1 21.0 23.2 19.4 21.5 18.8 20.6 17.6 19.2 16.4 18.1 15.5 17.2 1.0 13.9 15.4 1.0 1.0 12.7 14.1 1.0 1.0 11.6 12.8 10.7 1.0 11.9 1.0 1.0 1.0 9.9 1.0 11.0 1.0 9.3 1.0 10.3 1.0 8.5 1.0 9.4 Maximum Clamping Maximum 9.6 5.0 9.2 5.0 11.4 10.3 5.0 12.3 11.2 5.0 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 5.0 5.0 6.0 6.0 7.0 8.0 8.0 9.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 16.0 16.0 19.0 17.0 20.0 19.0 21.0 20.0 25.0 23.0 28.0 25.0 31.0 28.0 31.0 30.0 35.0 31.0 39.0 36.0 42.0 39.0 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Working Peak Breakdown Voltage @ It ( Note 1 ) TYPE Reverse Leakage Maximum Reverse Maximum Reverse Clamping Voltage Voltage @ VRWM Current Voltage @ IRSM Temperature Maximum Maximum It VRWM VRSM Variation of VBR Max. (mA) (V) IR (nA) IRSM Min. (A) (V) (mV / °C) 40.0 48.9 44.2 1.0 36.0 1.0 7.8 64.3 46.0 1.0 36.0 1.0 8.6 58.1 41.0 54.3 1.0 40.0 7.0 71.4 44.4 49.1 1.0 7.8 58.4 1.0 52.8 61.1 6.5 7.2 SA45C 47.8 50.0 1.0 1.0 64.5 76.7 51.0 46.0 47.8 40.0 43.0 1.0 1.0 SA45CA 50.0 55.3 SA48C SA48CA 53.3 65.1 53.3 56.7 58.9 69.3 62.7 VBR (V) SA36C SA36CA SA40C SA40CA SA43C SA43CA SA51C 40.0 44.4 SA51CA 56.7 SA54C SA54CA 60.0 1.0 1.0 1.0 43.0 45.0 45.0 50.0 6.2 80.3 1.0 6.9 58.0 52.0 5.8 6.5 72.7 85.5 48.0 1.0 1.0 48.0 1.0 51.0 51.0 1.0 1.0 1.0 1.0 1.0 5.5 6.1 5.2 96.3 71.0 54.0 5.7 87.1 65.0 78.7 1.0 58.0 1.0 1.0 4.9 103 58.0 60.0 1.0 5.3 78.0 70.0 1.0 60.0 1.0 1.0 4.7 5.2 93.6 107 64.4 71.2 1.0 SA60C 66.7 SA60CA 81.5 73.7 1.0 1.0 SA64C 66.7 71,1 86.9 1.0 64.0 SA64CA 71.1 78.6 1.0 1.0 4.9 SA70C SA70CA 77.8 95.1 1.0 64.0 70.0 1.0 77.8 1.0 4.0 4.4 83.3 83.3 1.0 1.0 70.0 SA75C SA75CA 86.0 102 75.0 92.1 1.0 1.0 1.0 75.0 78.0 1.0 1.0 1.0 86.7 106 SA85C 86.7 94.4 95.8 115 1.0 85.0 SA85CA 94.4 104 1.0 1.0 SA90C SA90CA 100 122 111 1.0 1.0 85.0 90.0 1.0 90.0 1.0 136 1.0 100 123 1.0 100 110 111 66.0 61.0 1.0 SA58CA SA100C SA100CA 56.0 91.1 82.4 1.0 60.0 64.4 100 111 63.0 77.4 54.0 73.3 66.3 SA58C SA78C SA78CA 55.0 69.4 1.0 1.0 SA110C SA110CA 122 149 122 SA120C 133 133 135 163 1.0 1.0 78.0 4.4 96.8 114 103 125 80.0 71.0 86.0 76.0 94.0 113 85.0 3.7 134 4.1 121 139 101 91.0 3.6 4.0 105 126 95.0 3.3 151 3.6 137 114 103 3.1 3.4 160 146 121 1.0 1.0 2.8 179 3.1 135 123 1.0 2.6 2.8 162 196 177 133 1.0 1.0 110 148 110 1.0 1.0 120 2.3 214 162 147 1.0 2 193 144 176 1.0 231 209 SA1SOC 159 204 2.2 2.4 146 175 144 167 1.0 1.0 120 130 1.0 1.0 1.9 268 SA150CA 167 SA160C SA160CA 178 243 287 178 SA170C SA170CA 189 189 197 231 SA120CA SA130C SA130CA | 150 1.0 1.0 185 1.0 150 1.0 2.1 218 1.0 1.0 160 160 1.0 1.7 1.0 259 196 1.0 170 304 230 1.0 170 1.0 1.0 1.9 1.6 1.8 275 208 209 130 158 1.0 Note: ( 1 ) VBR measured after It applied for 300 |is., It = square wave pulse or equivalent. 203 184 217 RATING AND CHARACTERISTIC CURVES ( SA5.0C - SA170CA ) FIG.1 - PULSE DERATING CURVE FIG.2 - PULSE WAVEFORM J*n 100 -f\= KVs HI o: OL u LU Q LU LU g W O Pulse Width (tp) s defined as that point where the peak current decays to 50% •— of IRSU _ Peak Value - IRSU HalfIPValuelaai ^ \— —»• 50 k^ i ,I/ \5 °C 1000 Waveform ^ asc efined by R.E.A "\X ^^ .^ — 0 25 50 75 100 125 150 1.0 175 . T,TIME(ms) Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - STEADY STATE POWER DERATING -^ FIG.4 - PULSE RATING CURVE a: \e Phase Half Wave W LLI \ Resistive or Inductive load \ LU NJ n 1.0 d. -* 25 50 CL 75 100 125 150 175 Sing 60 H o.ins -, D, STEADY STATE POWER DISSIPATION (WATTS) — 2.0 10)is 100(is 1 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) 1.0ms 200