Multi-rate 10-Gigabit DWDM 40km XFP Transceivers with Digital Diagnostics TXP1XGGI2xx Pb Product Description The TXP1XGGI2xx DWDM XFP multi-rate fiber optic transceivers with digital diagnostics monitoring functionality provide a quick and reliable interface for 40km 10Gbps DWDM applications. The diagnostic functions, alarm and warning features as described in the XFP Multi-Source Agreement (MSA) are provided via standard I2C serial interface. The transceivers are compliant with the XFP Multi-Source Agreement and are designed to support SONET/SDH, 10G Ethernet, and 10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s. Each transceiver utilizes an electro-absorption modulator integrated laser with an operating wavelength in full compliance with 100GHz (0.8nm) spacing per the ITU-grid. The transceivers satisfy Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and international IEC-60825 standards. The transceivers connect to standard 30-pad XFP connectors for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers without removing the power supply from the host system. Features Lead Free Design & Fully RoHS Compliant The transmitter and receiver DATA interfaces are AC coupled Current Mode Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output interfaces are also provided. Compliant with XFP MSA The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C (Extended), or -40°C to +85°C (Industrial). Compliant with ITU-T G.709 Compliant with OC-192/STM-64 Support DWDM 10G Ethernet Applications Support 10G Fiber Channel Applications Digital Diagnostics Monitoring Temperature-stabilized EML Transmitter Low Power Consumption Wide Case Operating Temperature Range Transmission Distance up to 40km Absolute Maximum Ratings Parameter Storage Temperature Symbol Minimum Maximum Units TST - 40 + 85 °C -5 + 70 -5 + 85 Commercial Operating Case Temperature 1 Extended TOP Industrial Supply Voltage - 40 + 85 VCC2 0 + 2.0 VCC3 - 0.2 + 3.6 °C V VCC5 - 0.2 + 6.0 Operating Relative Humidity 2 RH 0 85 % Input Voltage VIN 0 V CC V 1 2 Case temperature is measured on top side of XFP module. Non condensing An Oplink Company S0120. Rev.03. 2011-05-11 TXP1XGGI2xx (Over Operating Case Temperature Range and VCC = 3.13 to 3.47V) Transmitter Performance Characteristics All parameters guaranteed only at typical data rate Parameter Symbol Minimum Typical Maximum Units Operating Data Rate B 9.95 - 11.09 Gb/s Average Optical Output Power (50% duty cycle) PO - 1.0 - + 3.0 dBm Transmitter OFF Power POFF - - - 45.0 dBm Extinction Ratio @ 9.95Gb/s to 10.7Gb/s ER 8.2 - - dB Center Wavelength λC 1 Spectral Width (-20dB) 2 Side Mode Suppression Ratio Relative Intensity Noise Reflectance Tolerance Tx Jitter Generation (peak-to-peak) 3 Jitter Generation (RMS) Dispersion Penalty @ 9.95Gb/s 4 See Ordering Information Table Δλ20 - - 1.0 nm SMSR 30 - - dB RIN - - - 130 dB/Hz refT - - - 27 dB JGP-P - - 0.1 UI JGRMS - - 0.01 UI - - 2.0 - - 2.5 DP @ 11.09Gb/s nm Optical Output Eye dB Compliant with GR253-CORE, IEEE 803.3ae , and ITU-T G.959 BOL: +/-0.05nm from ITU grid. EOL: +/-0.1nm from ITU grid. Measured with OSA and 0.1nm resolution bandwidth. 3 Jitter generation is compliant with SONET OC-192 per GR-253 and OTU-2 per G.709. 4 Specified as the difference between the maximum receiver sensitivity and the worst case receiver sensitivity with 40km fiber. 1 2 Receiver Performance Characteristics (Over Operating Case Temperature Range and VCC= 3.13 to 3.47V ) Parameter Symbol Minimum Typical Maximum Units B 9.95 - 11.09 Gb/s λ 1260 - 1570 nm - - - 16.0 - - - 19.0 + 0.5 - - Operating Data Rate Wavelength of Operation @ 9.95Gb/s (10 BER) -12 Receiver Sensitivity @ 11.09Gb/s (10-4 BER) Maximum Input Optical Power Pmin Pmax dBm dBm Increasing Light Input Plos+ - - - 16.0 Decreasing Light Input Plos- - 28.0 - - LOS Hysteresis - 0.5 - - dB Receiver Reflectance - - - - 27 dB LOS Thresholds Laser Safety: All transceivers are Class I Laser products per FDA/CDRH and IEC-60825 standards. They must be operated under specified operating conditions. Oplink Communications, Inc dBm Oplink Communications, Inc. DATE OF MANUFACTURE: This product complies with 21 CFR 1040.10 and 1040.11 Meets Class I Laser Safety Requirements 2 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Electrical Interface (Over Operating Case Temperature Range and VCC ) Parameter Symbol Minimum Typical Maximum Units Zd - 100 - Ω Differential Input Voltage Swing Vp-p, diff 120 - 820 mV Differential Output Voltage Swing Vp-p, diff 340 550 850 mV Output Rise/Fall Time (20 to 80%) Tr /Tf 24 - - ps VIL - 0.3 - 0.8 VIH 2.0 - VCC + 0.3 VOL 0 - 0.4 VOH host_VCC - 0.5 - host_VCC + 0.3 Differential Impedance TX_Dis, P_Down/RST XFP Interrupt, Mod_NR, RX_LOS Symbol Minimum Typical Maximum VCC2 1.71 1.8 1.89 VCC3 3.13 3.3 3.47 VCC5 4.75 5.0 5.25 ICC2 - 310 350 ICC3 - 350 750 ICC5 - 40 100 PW - 2 3.5 W PDW - - 1.5 W Supply Voltage Supply Current Power Dissipation P_Down Power Dissipation XFP Transceiver Electrical Pad Layout 1 GND 30 GND 2 VEE5 29 TD+ 3 Mod_DeSel 28 TD- 4 Interrupt 27 GND 5 TX_Dis 26 GND 6 VCC5 25 RefCLK- 7 GND 24 RefCLK+ 8 VCC3 23 GND 9 VCC3 22 VCC2 Toward Bezel 28 GND 27 GND 26 RefCLK- 25 RefCLK+ 24 GND 23 Vcc2 22 P_Down/RST 21 Vcc2 20 GND 19 RD+ 18 RD- 17 GND 16 Mod_DeSel 4 Interrupt 5 TX_Dis 6 Vcc5 7 GND 8 Vcc3 5 19 GND 11 SDA 13 Mod_NR 18 RD+ 12 Mod_Abs 14 RX_LOS 17 RD- 13 Mod_NR 15 GND 16 GND 14 RX_LOS 15 GND 3 TD- 3 EE 12 Mod_Abs Oplink Communications, Inc 29 V SCL Top of XFP Board TD+ 2 10 Bottom of XFP Board (as viewed thru top of board) mA 30 GND 20 VCC2 11 SDA V GND 1 Vcc3 21 TP_Down/RS Units Host Board Connector Pad Layout 9 10 SCL V (Over Operating Case Temperature Range and VCC ) Electrical Power Supply Characteristics Parameter V Toward ASIC S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Module Pin Description Pin Logic Symbol Description 1 - GND Module Ground 2 - VEE5 Optional -5.2V Power Supply (Not Required) 3 LVTTL-I Mod_DeSel 4 Module De-select; When held low allows module to respond to 2-wire serial interface LVTTL-O Interrupt Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial Interface 5 LVTTL-I TX_Dis Transmitter Disable; Turns off transmitter laser output 6 - VCC5 +5V Power Supply 7 - GND Module Ground 8 - VCC3 +3.3V Power Supply 9 - VCC3 +3.3V Power Supply 10 LVTTL-I/O SCL 2-Wire Serial Interface Clock 11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 12 LVTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 13 LVTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 14 LVTTL-O RX_LOS Receiver Loss Of Signal Indicator 15 - GND Module Ground 16 - GND Module Ground 17 CML-O RD- Receiver Inverted Data Output 18 CML-O RD+ Receiver Non-Inverted Data Output 19 - GND Module Ground 20 - VCC2 +1.8V Power supply Power down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode. 21 LVTTL-I P_Down/RST 22 - VCC2 +1.8V Power supply 23 - GND Module Ground 24 PECL-I RefCLK+ Reference Clock Non-Inverted Input (Not Required) 25 PECL-I RefCLK- Reference Clock Inverted Input (Not Required) 26 - GND Module Ground 27 - GND Module Ground 28 CML-I TD- Transmitter Inverted Data Input 29 CML-I TD+ Transmitter Non-Inverted Data Input 30 - GND Module Ground Oplink Communications, Inc Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle. 4 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Host Board Termination & Coupling TD+ +1.8V +3.3V CML INPUTS 1µH coil or ferrite inductor 0.1 + 10 0.1 RD+ CML OUTPUTS 1µH coil or ferrite inductor 0.1 TD- 20, 22 + 10 0.1 RD- 8, 9 ASIC/ SerDes XFP +5.0V 1µH coil or ferrite inductor 0.1 +3.3V + 10 0.1 6 R SCL, SDA, Mod_Abs, Mod_NR, +3.3V R +3.3V R Interrupt, RX_LOS All caps are in units of µF Application Notes Electrical Interface: All signal interfaces are compliant with the XFP MSA specification. The high speed DATA interface is differential AC-coupled internally and can be directly connected to a 3.3V SERDES IC. an open collector and must be pulled to Host_Vcc on the host board. RX_LOS: The Loss of Signal circuit monitors the level of the incoming optical signal and generates a logic HIGH when an insufficient photocurrent is produced. Module Behavior During P_Down and RST: During execution of a reset (t_init) or while held in Power Down mode, a module may be unable to determine the correct value for Mod_NR and RX_LOS. These outputs as well as all interrupt related flags, except completion of Reset flag, shall be disregarded by the host. When the module completes a Reset and is not in Power Down mode, the module must represent the correct value of both signals on its outputs before posting a completion of reset interrupt to the host. P_Down/RST: The negative edge of Reset Function signal initiates a complete module reset. TX_Dis: When the TX Disable pin is at logic HIGH, the transmitter optical output is disabled. (less than -45dBm). P_Down: The Power Down Function pin, when held High by the host, places the module in the standby (Low Power) mode with a maximum power dissipation of 1.5W. This protects hosts which are not capable of cooling higher power modules which may be accidentally inserted. The module’s 2-wire serial interface and all laser safety functions must be fully functional in this low power mode. During P_Down, the module shall still support the completion of reset Interrupt, as well as maintain functionality of the variable power supply. At no time shall a module cause spurious assertion of the Interrupt pin. When a host initially applies power to a module with the P_Down/RST signal asserted, a module comes up in power down mode. The module shall only assert the Interrupt signal pin to inform the host it has completed a reset. The completion of reset flag shall be the only interrupt source flag set during power down mode. The host is expected to clear this interrupt before releasing the module from the power down mode. The transition from power down mode to normal mode will trigger a reset of the module and result in a 2nd module reset and a 2nd reset completion interrupt to the host. Mod_NR: The Mod_NR is an output pin that when High, indicates that the module has detected a condition that renders transmitter and or receiver data invalid, shall consist of logical OR of the following signals: • Transmit Signal Conditioner Loss of Lock • Transmitter Laser Fault • Receiver Signal Conditioner Loss of Lock Power Supply and Grounding: The power supply line should be well-filtered. All 0.1μF power supply bypass capacitors should be as close to the transceiver module as possible. Other conditions deemed valuable to the detection of fault may be added to the Mod_NR. The Mod_NR output pin is Oplink Communications, Inc 5 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Package Outline DIMENSION IN MILLIMETERS NOTES: UNLESS OTHERWISE SPECIFIED Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s Sales and Marketing for your requirements and ordering information (510) 933-7200 or [email protected]. Model Name Operating Temperature Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance TXP1XGGI2C00061G - 5°C to +70°C Commercial 1528.77 196.1 61 40km TXP1XGGI2C00060G - 5°C to +70°C Commercial 1529.55 196.0 60 40km TXP1XGGI2C00059G - 5°C to +70°C Commercial 1530.33 195.9 59 40km TXP1XGGI2C00058G - 5°C to +70°C Commercial 1531.12 195.8 58 40km TXP1XGGI2C00057G - 5°C to +70°C Commercial 1531.90 195.7 57 40km TXP1XGGI2C00056G - 5°C to +70°C Commercial 1532.68 195.6 56 40km TXP1XGGI2C00055G - 5°C to +70°C Commercial 1533.47 195.5 55 40km TXP1XGGI2C00054G - 5°C to +70°C Commercial 1534.25 195.4 54 40km TXP1XGGI2C00053G - 5°C to +70°C Commercial 1535.04 195.3 53 40km TXP1XGGI2C00052G - 5°C to +70°C Commercial 1535.82 195.2 52 40km TXP1XGGI2C00051G - 5°C to +70°C Commercial 1536.61 195.1 51 40km TXP1XGGI2C00050G - 5°C to +70°C Commercial 1537.40 195.0 50 40km TXP1XGGI2C00049G - 5°C to +70°C Commercial 1538.19 194.9 49 40km TXP1XGGI2C00048G - 5°C to +70°C Commercial 1538.98 194.8 48 40km TXP1XGGI2C00047G - 5°C to +70°C Commercial 1539.77 194.7 47 40km TXP1XGGI2C00046G - 5°C to +70°C Commercial 1540.56 194.6 46 40km Oplink Communications, Inc 6 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Model Name Operating Temperature Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance TXP1XGGI2C00045G - 5°C to +70°C Commercial 1541.35 194.5 45 40km TXP1XGGI2C00044G - 5°C to +70°C Commercial 1542.14 194.4 44 40km TXP1XGGI2C00043G - 5°C to +70°C Commercial 1542.94 194.3 43 40km TXP1XGGI2C00042G - 5°C to +70°C Commercial 1543.73 194.2 42 40km TXP1XGGI2C00041G - 5°C to +70°C Commercial 1544.53 194.1 41 40km TXP1XGGI2C00040G - 5°C to +70°C Commercial 1545.32 194.0 40 40km TXP1XGGI2C00039G - 5°C to +70°C Commercial 1546.12 193.9 39 40km TXP1XGGI2C00038G - 5°C to +70°C Commercial 1546.92 193.8 38 40km TXP1XGGI2C00037G - 5°C to +70°C Commercial 1547.72 193.7 37 40km TXP1XGGI2C00036G - 5°C to +70°C Commercial 1548.51 193.6 36 40km TXP1XGGI2C00035G - 5°C to +70°C Commercial 1549.32 193.5 35 40km TXP1XGGI2C00034G - 5°C to +70°C Commercial 1550.12 193.4 34 40km TXP1XGGI2C00033G - 5°C to +70°C Commercial 1550.92 193.3 33 40km TXP1XGGI2C00032G - 5°C to +70°C Commercial 1551.72 193.2 32 40km TXP1XGGI2C00031G - 5°C to +70°C Commercial 1552.52 193.1 31 40km TXP1XGGI2C00030G - 5°C to +70°C Commercial 1553.33 193.0 30 40km TXP1XGGI2C00029G - 5°C to +70°C Commercial 1554.13 192.9 29 40km TXP1XGGI2C00028G - 5°C to +70°C Commercial 1554.94 192.8 28 40km TXP1XGGI2C00027G - 5°C to +70°C Commercial 1555.75 192.7 27 40km TXP1XGGI2C00026G - 5°C to +70°C Commercial 1556.55 192.6 26 40km TXP1XGGI2C00025G - 5°C to +70°C Commercial 1557.36 192.5 25 40km TXP1XGGI2C00024G - 5°C to +70°C Commercial 1558.17 192.4 24 40km TXP1XGGI2C00023G - 5°C to +70°C Commercial 1558.98 192.3 23 40km TXP1XGGI2C00022G - 5°C to +70°C Commercial 1559.79 192.2 22 40km TXP1XGGI2C00021G - 5°C to +70°C Commercial 1560.61 192.1 21 40km TXP1XGGI2C00020G - 5°C to +70°C Commercial 1561.42 192.0 20 40km TXP1XGGI2C00019G - 5°C to +70°C Commercial 1562.23 191.9 19 40km TXP1XGGI2C00018G - 5°C to +70°C Commercial 1563.05 191.8 18 40km TXP1XGGI2C00017G - 5°C to +70°C Commercial 1563.86 191.7 17 40km Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance Model Name Operating Temperature TXP1XGGI2E00061G - 5°C to +85°C Extended 1528.77 196.1 61 40km TXP1XGGI2E00060G - 5°C to +85°C Extended 1529.55 196.0 60 40km TXP1XGGI2E00059G - 5°C to +85°C Extended 1530.33 195.9 59 40km TXP1XGGI2E00058G - 5°C to +85°C Extended 1531.12 195.8 58 40km TXP1XGGI2E00057G - 5°C to +85°C Extended 1531.90 195.7 57 40km TXP1XGGI2E00056G - 5°C to +85°C Extended 1532.68 195.6 56 40km TXP1XGGI2E00055G - 5°C to +85°C Extended 1533.47 195.5 55 40km TXP1XGGI2E00054G - 5°C to +85°C Extended 1534.25 195.4 54 40km TXP1XGGI2E00053G - 5°C to +85°C Extended 1535.04 195.3 53 40km TXP1XGGI2E00052G - 5°C to +85°C Extended 1535.82 195.2 52 40km TXP1XGGI2E00051G - 5°C to +85°C Extended 1536.61 195.1 51 40km Oplink Communications, Inc 7 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx Model Name Operating Temperature Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance TXP1XGGI2E00050G - 5°C to +85°C Extended 1537.40 195.0 50 40km TXP1XGGI2E00049G - 5°C to +85°C Extended 1538.19 194.9 49 40km TXP1XGGI2E00048G - 5°C to +85°C Extended 1538.98 194.8 48 40km TXP1XGGI2E00047G - 5°C to +85°C Extended 1539.77 194.7 47 40km TXP1XGGI2E00046G - 5°C to +85°C Extended 1540.56 194.6 46 40km TXP1XGGI2E00045G - 5°C to +85°C Extended 1541.35 194.5 45 40km TXP1XGGI2E00044G - 5°C to +85°C Extended 1542.14 194.4 44 40km TXP1XGGI2E00043G - 5°C to +85°C Extended 1542.94 194.3 43 40km TXP1XGGI2E00042G - 5°C to +85°C Extended 1543.73 194.2 42 40km TXP1XGGI2E00041G - 5°C to +85°C Extended 1544.53 194.1 41 40km TXP1XGGI2E00040G - 5°C to +85°C Extended 1545.32 194.0 40 40km TXP1XGGI2E00039G - 5°C to +85°C Extended 1546.12 193.9 39 40km TXP1XGGI2E00038G - 5°C to +85°C Extended 1546.92 193.8 38 40km TXP1XGGI2E00037G - 5°C to +85°C Extended 1547.72 193.7 37 40km TXP1XGGI2E00036G - 5°C to +85°C Extended 1548.51 193.6 36 40km TXP1XGGI2E00035G - 5°C to +85°C Extended 1549.32 193.5 35 40km TXP1XGGI2E00034G - 5°C to +85°C Extended 1550.12 193.4 34 40km TXP1XGGI2E00033G - 5°C to +85°C Extended 1550.92 193.3 33 40km TXP1XGGI2E00032G - 5°C to +85°C Extended 1551.72 193.2 32 40km TXP1XGGI2E00031G - 5°C to +85°C Extended 1552.52 193.1 31 40km TXP1XGGI2E00030G - 5°C to +85°C Extended 1553.33 193.0 30 40km TXP1XGGI2E00029G - 5°C to +85°C Extended 1554.13 192.9 29 40km TXP1XGGI2E00028G - 5°C to +85°C Extended 1554.94 192.8 28 40km TXP1XGGI2E00027G - 5°C to +85°C Extended 1555.75 192.7 27 40km TXP1XGGI2E00026G - 5°C to +85°C Extended 1556.55 192.6 26 40km TXP1XGGI2E00025G - 5°C to +85°C Extended 1557.36 192.5 25 40km TXP1XGGI2E00024G - 5°C to +85°C Extended 1558.17 192.4 24 40km TXP1XGGI2E00023G - 5°C to +85°C Extended 1558.98 192.3 23 40km TXP1XGGI2E00022G - 5°C to +85°C Extended 1559.79 192.2 22 40km TXP1XGGI2E00021G - 5°C to +85°C Extended 1560.61 192.1 21 40km TXP1XGGI2E00020G - 5°C to +85°C Extended 1561.42 192.0 20 40km TXP1XGGI2E00019G - 5°C to +85°C Extended 1562.23 191.9 19 40km TXP1XGGI2E00018G - 5°C to +85°C Extended 1563.05 191.8 18 40km TXP1XGGI2E00017G - 5°C to +85°C Extended 1563.86 191.7 17 40km Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance Model Name Operating Temperature TXP1XGGI2I00061G -40°C to +85°C Industrial 1528.77 196.1 61 40km TXP1XGGI2I00060G -40°C to +85°C Industrial 1529.55 196.0 60 40km TXP1XGGI2I00059G -40°C to +85°C Industrial 1530.33 195.9 59 40km TXP1XGGI2I00058G -40°C to +85°C Industrial 1531.12 195.8 58 40km TXP1XGGI2I00057G -40°C to +85°C Industrial 1531.90 195.7 57 40km TXP1XGGI2I00056G -40°C to +85°C Industrial 1532.68 195.6 56 40km Oplink Communications, Inc 8 S0120. Rev.03. 2011-05-11 TXP1XGGI2xx 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Model Name Operating Temperature Center Wavelength (nm) ITU Frequency (THz) Wavelength Reference Distance TXP1XGGI2I00055G -40°C to +85°C Industrial 1533.47 195.5 55 40km TXP1XGGI2I00054G -40°C to +85°C Industrial 1534.25 195.4 54 40km TXP1XGGI2I00053G -40°C to +85°C Industrial 1535.04 195.3 53 40km TXP1XGGI2I00052G -40°C to +85°C Industrial 1535.82 195.2 52 40km TXP1XGGI2I00051G -40°C to +85°C Industrial 1536.61 195.1 51 40km TXP1XGGI2I00050G -40°C to +85°C Industrial 1537.40 195.0 50 40km TXP1XGGI2I00049G -40°C to +85°C Industrial 1538.19 194.9 49 40km TXP1XGGI2I00048G -40°C to +85°C Industrial 1538.98 194.8 48 40km TXP1XGGI2I00047G -40°C to +85°C Industrial 1539.77 194.7 47 40km TXP1XGGI2I00046G -40°C to +85°C Industrial 1540.56 194.6 46 40km TXP1XGGI2I00045G -40°C to +85°C Industrial 1541.35 194.5 45 40km TXP1XGGI2I00044G -40°C to +85°C Industrial 1542.14 194.4 44 40km TXP1XGGI2I00043G -40°C to +85°C Industrial 1542.94 194.3 43 40km TXP1XGGI2I00042G -40°C to +85°C Industrial 1543.73 194.2 42 40km TXP1XGGI2I00041G -40°C to +85°C Industrial 1544.53 194.1 41 40km TXP1XGGI2I00040G -40°C to +85°C Industrial 1545.32 194.0 40 40km TXP1XGGI2I00039G -40°C to +85°C Industrial 1546.12 193.9 39 40km TXP1XGGI2I00038G -40°C to +85°C Industrial 1546.92 193.8 38 40km TXP1XGGI2I00037G -40°C to +85°C Industrial 1547.72 193.7 37 40km TXP1XGGI2I00036G -40°C to +85°C Industrial 1548.51 193.6 36 40km TXP1XGGI2I00035G -40°C to +85°C Industrial 1549.32 193.5 35 40km TXP1XGGI2I00034G -40°C to +85°C Industrial 1550.12 193.4 34 40km TXP1XGGI2I00033G -40°C to +85°C Industrial 1550.92 193.3 33 40km TXP1XGGI2I00032G -40°C to +85°C Industrial 1551.72 193.2 32 40km TXP1XGGI2I00031G -40°C to +85°C Industrial 1552.52 193.1 31 40km TXP1XGGI2I00030G -40°C to +85°C Industrial 1553.33 193.0 30 40km TXP1XGGI2I00029G -40°C to +85°C Industrial 1554.13 192.9 29 40km TXP1XGGI2I00028G -40°C to +85°C Industrial 1554.94 192.8 28 40km TXP1XGGI2I00027G -40°C to +85°C Industrial 1555.75 192.7 27 40km TXP1XGGI2I00026G -40°C to +85°C Industrial 1556.55 192.6 26 40km TXP1XGGI2I00025G -40°C to +85°C Industrial 1557.36 192.5 25 40km TXP1XGGI2I00024G -40°C to +85°C Industrial 1558.17 192.4 24 40km TXP1XGGI2I00023G -40°C to +85°C Industrial 1558.98 192.3 23 40km TXP1XGGI2I00022G -40°C to +85°C Industrial 1559.79 192.2 22 40km TXP1XGGI2I00021G -40°C to +85°C Industrial 1560.61 192.1 21 40km TXP1XGGI2I00020G -40°C to +85°C Industrial 1561.42 192.0 20 40km TXP1XGGI2I00019G -40°C to +85°C Industrial 1562.23 191.9 19 40km TXP1XGGI2I00018G -40°C to +85°C Industrial 1563.05 191.8 18 40km TXP1XGGI2I00017G -40°C to +85°C Industrial 1563.86 191.7 17 40km Oplink Communications, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Communications, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, Inc. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, Inc. S0120. Rev.03. 2011-05-11 © 2011, Oplink Communications, Inc. 9