F-Series Single Pole Toggle Switches General purpose workhorses with options tailored to meet most any need. Ratings to 20A 277VAC, various actuator, bushing, termination, and circuit choices allow this versatile switch to easily integrate into a variety of different applications. The F-Series has a storied history in the Marine, Food Service, Generator, Industrial Control, and Office Automation markets and is appropriate for usage in low voltage DC applications as well. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | F-Series Toggle Switches Dielectric Strength Mechanical Life 1000V - live to dead metal parts 100,000 cycles Electrical Life Operating Temperature 50,000 cycles - maintained 25,000 cycles - momentary 0°F to 150°F (-17.8°C to +65.6°C) 2FA54 73 / TABS 1 Base Part Number 2 Actuator Style 3 Tab Terminals 2 ACTUATOR STYLE 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING/TERMINATION1 10A 250VAC; 15A 125VAC; 3/4 HP 125-250VAC Solder Lug .250 Tab QC Screw Terminals On-None-Off 2FA53 2FA53- . . . /TABS 2FA54 (On)-None-Off 6FA53 6FA53- . . . /TABS 6FA54 On-None-(Off) 6FA57 6FA57- . . . /TABS 6FA58 On-None-On 2FB53 2FB53- . . . /TABS 2FB54 On-None-(On) 6FB53 6FB53- . . . /TABS 6FB54 On-Off-On 2FC53 2FC53- . . . /TABS 2FC54 On-Off-(On) 6FC57 6FC57- . . . /TABS 6FC58 (On-Off-(On) 6FC53 6FC53- . . . /TABS 6FC54 BAT STYLE TOGGLE2 unsealed sealed 73 78 E3 E8 toggle length 0.687 2.000 bushing length 0.465 0.465 3 TAB TERMINALS /TABS (blank) Tab Terminals Leave blank if tab terminals not required. Additional ratings up to 20A 125VAC, 12A 250VAC, 1HP 120-240 VAC available. Consult factory for specifics. Notes: 1 Consult factory for .187 tab, wire lead and combination screw/tab/solder lug termination callouts. 2 Additional toggle options are available. Consult factory. ( ) indicates momentary function. .075[1.91] DIA .125[3.18] DIA 15 32-32UNS-2A THREAD .330[8.38] .437[11.09] .394[10.00] .250[6.35] .187[4.74] .187[4.74] KEYWAY .072[1.82] X .038[.965] DP SOLDER LUG .687[17.44] .055[1.40] DIA .250 TAB (Q.C.) .187 TAB (Q.C.) TERMINAL TYPE .465[11.81] #6-32NC-2 THREAD .670[17.02] 6.000[152.40] .141[3.58] .370[9.39] .500[12.70] .286[7.26] .348[8.84] 1.134[28.80] .634[16.10] .500[12.70] DIA SCREW (ASSEMBLED) .062[1.57] .038[9.65] MOUNTING HOLE *Manufacturer reserves the right to change product specification without prior notice. WITH KEYWAY WIRE LEAD .500[12.70] DIA .376[9.55] .500[12.70] DIA .125[3.17] DIA WITH LOCKING RING REV_SW_F_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com