PLASTIC FILM CAPACITORS EC Metallized Polypropylene Film AC Power Capacitor series Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Maximum permissible +85˚C (Z) temperature Minimum ambient – 25˚C (B) temperature Rated Voltage Range 200 to 400VAC Rated Capacitance Range 1.0 to 50µF Capacitance Tolerance +10 to – 5% Dielectric Loss Tangent 0.12% or less (at 20˚C, 50 / 60Hz 200VAC) Between Terminals : Rated Voltage (VAC) × 175% 10secs. Withstand Voltage Between Terminals connected together and case : 2000VAC 60secs. Between Terminals connected together and case : Insulation Resistance 1000 MΩ or more (at 500VDC) Encapsulation Flame-retardant epoxy cased, Resin filled Current duration class 40D (40,000h) Safety Mechanism Non-included Drawing Please refer to page 398. Dimensions Unit : mm V (Code) (µF) Cap. Cod e 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0 12.0 14.0 15.0 16.0 18.0 20.0 22.0 25.0 30.0 40.0 50.0 EN Size 105 155 205 255 305 355 405 455 505 605 705 805 106 126 146 156 166 186 206 226 256 306 406 506 A – – 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 200VAC (2D) B C – – – – 11.5 25.0 11.5 25.0 11.5 25.0 11.5 25.0 11.5 25.0 13.5 27.0 13.5 27.0 13.5 27.0 15.5 29.0 17.5 31.0 19.5 33.0 21.5 35.0 24.0 37.0 24.0 37.0 24.0 37.0 26.0 40.0 26.0 40.0 26.0 40.0 26.0 40.0 26.0 40.0 30.0 44.0 34.0 49.0 Fig. ①③ ⑤ ②④ A – – 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 250VAC (2E) B C – – – – 11.5 25.0 11.5 25.0 11.5 25.0 11.5 25.0 11.5 25.0 13.5 27.0 13.5 27.0 13.5 27.0 15.5 29.0 17.5 31.0 19.5 33.0 21.5 35.0 24.0 37.0 24.0 37.0 24.0 37.0 26.0 40.0 26.0 40.0 26.0 40.0 26.0 40.0 26.0 40.0 30.0 44.0 34.0 49.0 Fig. ①③ ⑤ A 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 37.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 400VAC (2G) B C 11.5 25.0 11.5 25.0 13.5 27.0 15.5 29.0 15.5 29.0 17.5 31.0 19.5 33.0 19.5 33.0 21.5 35.0 24.0 37.0 24.0 37.0 26.0 40.0 26.0 40.0 26.0 40.0 30.0 44.0 30.0 44.0 30.0 44.0 30.0 44.0 34.0 49.0 Fig. ①③ ⑤ ②④ ②④ Metallized Polypropylene Film AC Power Capacitor Safety Mechanism,UL810 approved (Failure current 5,000A) series Compliant to the RoHS directive (2011/65/EU). Specifications Item UL Approved No. Maximum permissible temperature Minimum ambient temperature Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Dielectric Loss Tangent Withstand Voltage Insulation Resistance Encapsulation Current duration class Safety Mechanism Performance Characteristics UL810 FILE No. E86988 +70˚C (M) –25˚C (B) 200 to 400VAC 1.0 to 30µF +10 to – 5% 0.12% or less (at 20˚C, 50/60Hz 200VAC) Between Terminals : Rated Voltage (VAC) × 175% 10secs. Between Terminals connected together and case : 2000VAC 60secs. Between Terminals connected together and case : 1000 MΩ or more (at 500VDC) Flame-retardant epoxy cased, Resin filled 40D (40,000h) Included Please indicate as "EEN" series when applying to UL. If you have any questions about dimensions, please contact your local Nichicon sales office. CAT.8100D PLASTIC FILM CAPACITORS EC series Drawing 6 ± 0.5 187 Tab terminal Resin filled Marking A ± 1.5 Fig. ① Resin case 4 ± 0.3 C ±1 3.5 ± 0.3 Resin case A ±1 187 Tab terminal 10 ± 3 10 ± 3 Resin filled Marking 25 ± 0.5 B ± 1 12 ± 0.5 φ 4.5 C ± 1.5 4.5 1 B ± 1 12 ± 0.5 20 ± 0.5 6 ± 0.5 Tab terminal 2 (Terminal shape : Q ) Fig. ② 25 ± 0.5 10 ± 3 3.5 ± 0.3 Resin case C ±1 Marking Resin filled A±1 Marking A ± 1.5 Fig. ③ 187 Tab terminal Resin case 4 ± 0.3 10 ± 3 187 Tab terminal C ± 1.5 Resin filled B ± 1 12 ± 0.5 φ 4.5 6 ± 0.5 4.5 1 B ± 1 12 ± 0.5 20 ± 0.5 6 ± 0.5 Tab terminal 1 (Terminal shape : Z ) Fig. ④ terminal (Terminal shape : W ) Pin A±1 Remarks : 1) Dimension of case bottom is expressed by A and B. 2) Dimension B of case top shall be 10 ± 2 C ±1 Marking B±1 G ±1 ± 1.0mm as shown below. ± 1.0mm of B dimension Resin case φ 0.8CP wire Resin filled Fig. ⑤ 3) In case of pin terminal product, cased dimension A is only 37mm. Dimensions Case size (mm) A B 37.0 11.5 37.0 13.5 37.0 15.5 37.0 17.5 37.0 19.5 37.0 21.5 37.0 24.0 58.0 26.0 58.0 30.0 58.0 34.0 Case size code ( ) for Pin terminal C 25.0 01 27.0 02 (09) 29.0 03 (27) 31.0 04 (11) 33.0 05 35.0 06 37.0 07 40.0 15 44.0 16 49.0 31 Terminal Shape Q Terminal Shape Z Terminal Shape W Fig Fig Lead pitch G (mm) Fig ① ③ ② ④ 34.2 ⑤ In case of pin terminal dimension will be 37.0 × 13.5 × 28.0mm. (Code : 0 9 ) In case of pin terminal dimension will be 37.0 × 15.5 × 29.0mm. (Code : 2 7 ) In case of pin terminal dimension will be 37.0 × 17.5 × 31.0mm. (Code : 1 1 ) CAT.8100D