ALUMINUM ELECTROLYTIC CAPACITORS GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sized series One rank smaller case sized than GG series. Suited for equipment down sizing. Compliant to the RoHS directive (2011/65/EU). GG Smaller GL Specifications Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 400 Rated Capacitance Range 120 to 1000µF Capacitance Tolerance ± 20 at 120Hz, 20°C 3%CV Leakage Current I 450V 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 3 CVvoltage (V) Rated Tangent of loss angle (tan δ) 400 0.15 tan δ (MAX.) 450 0.20 400 Rated voltage (V) Stability at Low Temperature Endurance Shelf Life Marking Impedance ratio ZT/Z20 (MAX.) Measurement frequency : 120Hz at 20°C 450 Measurement frequency : 120Hz Temperature : 20°C 8 Z – 25°C/ Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change Within ± 20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Capacitance change Within ± 20% of the initial capacitance value tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 400V 150µF) Polarity Polaritybar bar 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10101111 1212 13131414 )) (P.E.T. Sleeve Sleeve(P.E.T. LLGGLG 22GG 11 58 11 MMEELL ZA 2255 φ D +1.5 MAX. φD +1.5 MAX. Case Caselength lengthcode code Case Casedia. dia.code code Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) 1010 Rated Ratedcapacitance capacitance(150µF) (180µF) L L2±2 Rated Ratedvoltage voltage(400V) (400V) 4.0 0.5 4.0±0.5 Pressure Pressurerelief reliefvent vent Series Seriesname name φD φD 2222 2525 3030 3535 Code Code ZZ AA BB CC Type Type +0.2 +0.2 0.8 0.8 -0.1 -0.1 1010± 0 00 4.0 0.5 4.0±0.5 2.5 2.5 .1 0.1 ± ±0.1 0.1 2-2φ 2-2φ .2 .2 +0+.10 1 .8.-80 -0. +0.2 1.5 1.5+0.2 -0.1 -0.1 (Terminal (Terminaldimensions) dimensions) (PC (PCboard boardhole holedimensions) dimensions) The Theother otherterminal terminalisisalso alsoavailable availableupon uponrequest. request. Please Pleaserefer referpage page263 326forforschematic schematicofofdimensions. dimensions. Frequency coefficient of rated ripple current Frequency (Hz) Coeff. 400 · 450V 50 0.77 60 0.82 120 1.00 300 1.16 1 k 1.30 10k 1.41 50k or more 1.43 Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS GL series Dimensions 400V (2G) Cap. (µF) Size φD × L(mm) Rated ripple (mA) Leakage Current (mA) 22 0.73 780 0.88 LGL2G151MELZ25 LGL2G221MELZ30 780 0.88 LGL2G221MELA25 910 0.98 LGL2G271MELZ35 910 0.98 LGL2G271MELA30 1070 1.08 LGL2G331MELZ45 1070 1.08 LGL2G331MELA35 1040 1.08 LGL2G331MELB25 1230 1.18 LGL2G391MELZ50 1230 1.18 LGL2G391MELA40 1230 1.18 LGL2G391MELB30 1180 1.18 LGL2G391MELC25 1500 1.30 LGL2G471MELA45 1500 1.30 1660 1.41 LGL2G471MELB35 LGL2G561MELB40 1660 1.41 1740 1.56 LGL2G561MELC30 LGL2G681MELB45 1740 1.56 LGL2G681MELC35 1920 1.71 LGL2G821MELB50 1920 1.71 LGL2G821MELC40 1000 × 25 × 30 25 × 25 22 × 35 25 × 30 22 × 45 25 × 35 30 × 25 22 × 50 25 × 40 30 × 30 35 × 25 25 × 45 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50 730 22 2200 1.89 LGL2G102MELC50 Cap. (µF) Size φD × L(mm) Leakage Current (mA) Code LGL2W121MELZ25 150 220 270 330 390 470 560 680 820 Code 450V (2W) 120 150 180 220 270 330 390 470 560 680 820 × 25 × 30 25 × 25 22 × 35 25 × 30 22 × 40 25 × 35 30 × 25 22 × 45 25 × 40 30 × 30 25 × 45 30 × 35 35 × 25 25 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 Rated ripple (mA) 22 690 0.69 22 740 0.77 LGL2W151MELZ30 740 0.77 LGL2W151MELA25 770 0.85 LGL2W181MELZ35 770 0.85 LGL2W181MELA30 850 0.94 LGL2W221MELZ40 850 0.94 LGL2W221MELA35 820 0.94 LGL2W221MELB25 930 1.04 LGL2W271MELZ45 930 1.04 LGL2W271MELA40 930 1.04 LGL2W271MELB30 1120 1.15 LGL2W331MELA45 1120 1.15 LGL2W331MELB35 1070 1.15 LGL2W331MELC25 1280 1.25 LGL2W391MELA50 1280 1.25 LGL2W391MELB40 1280 1.25 LGL2W391MELC30 1480 1.37 LGL2W471MELB45 1480 1.37 LGL2W471MELC35 1660 1.50 LGL2W561MELB50 1660 1.50 LGL2W561MELC40 1770 1.65 LGL2W681MELC45 1930 1.82 LGL2W821MELC50 Rated ripple current (mArms) at 105°C 120Hz CAT.8100D