PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 D-86899 Landsberg am Lech Fon: +49/8191/305395 Fax: +49/8191/305397 www.petermann-technik.com [email protected] ISO 9001:2008 OCXO-20 FEATURES Pb-free RoHS-2 2011/65/EU compliant High reliability for low cost Aging of ± 0.001ppm/day in compact package using SC-CUT crystals Extended temperature range to -40/+75°C available Short warm-up time and excellent retrace behaviour Low power consumption and excellent phase noise parameters AT-cut and SC-cut based designs GENERAL DATA SERIES OCXO-20 PACKAGE 20.5 x 20.5 x 10.5 mm³ FREQUENCY RANGE 2.0 ~ 100.0 MHz FREQUENCY ACCURACY ±0.2 ppm (control voltage centered) VS. AGING AT-CUT ±0.002 ppm/day / ±0.3 ppm/first year / ±2 ppm/10 years VS. AGING SC-CUT ±0.001 ppm/day / ±0.1 ppm/first year / ±0.5 ppm/10 years FREQUENCY VS. LOAD ±0.01 ppm / load changement of ±10 % STABILITY VS. SUPPLY VOLTAGE ±0.01 ppm / supply voltage changement of ±5% VS. TEMPERATURE See table 1 SHORT TERM STABILITY 1x10E-11/s (10 MHz SC) OPERATING TEMPERATURE RANGE 0/+50°C ~ -40/+75°C STORAGE TEMPERATURE RANGE -40/+100°C SUPPLY VOLTAGE +3.3VDC / +5.0VDC / +12VDC 3.6 W max. during warm-up / 1.2 W max. when static CURRENT CONSUMPTION AT-CUT ±0.2 ppm <3 minutes WARM-UP TIME SC-CUT ±0.1 ppm <3 minutes FREQUENCY AT-CUT ±3.0 ppm CONTROL RANGE SC-CUT ±0.7 ppm CONTROL VOLTAGE 0 ~ 3.3 VDC, 0 ~ 5 VDC SLOPE POSITIVE LINEARITY ±10% -120 dBc/Hz 10 Hz 100 Hz -140 dBc/Hz PHASE NOISE (10MHz) 1 kHz -145 dBc/Hz 10 kHz -150 dBc/Hz OUTPUT SIGNAL AND LOAD CHARACTERISTICS See table 2 OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION CRYSTALS CERAMIC FILTERS OSCILLATORS SAW COMPONENTS CERAMIC RESONATORS Premium Quality by PETERMANN-TECHNIK Spec.01 • REV.00 • August 2013 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 D-86899 Landsberg am Lech Fon: +49/8191/305395 Fax: +49/8191/305397 www.petermann-technik.com [email protected] ISO 9001:2008 TABLE 1- FREQUENCY STABILITY VS. TEMPERATURE CODE FREQUENCY STABILITY VS. TEMPERATURE A B C D E F ±50ppb for AT-CUT ±5ppb for SC-CUT ±100ppb for AT-CUT ±10ppb for SC-CUT ±100ppb for AT-CUT ±30ppb for SC-CUT TEMPERATURE RANGE 0/+50°C 0/+50°C -20/+70°C -20/+70°C -40/+75°C -40/+75°C TABLE 2 - OUTPUT WAVEFORM AND LOAD CHARACTERISTICS OUTPUT WAVEFORM OUTPUT TYPE CODE SINE WAVE S 2.000 ~ 30.000 MHz F: FUNDAMENTAL 10.000 ~ 100.000 MHz O: OVERTONE Load: 50 Ω Output level: >2dBm Harmonic : < -25dBm Noise Suppression: <- 75dBm H 2.000 ~ 30.000 MHz F: FUNDAMENTAL 10.000 ~ 100.000 MHz O: OVERTONE Load: 15PF TYP/50 PF Max. available “1“ level: > 0.9VDD; “0“ level: <0.1VDD Duty cycle: 45/55 Rise/fall time: <6ns(fn<40MHz) <3ns(fn>40 MHz) L 2.000 ~ 30.000 MHz F: FUNDAMENTAL 10.000 ~ 100.000 MHz O: OVERTONE Load: 15PF TYP/50 PF Max. available “1“ level: > 0.9VDD; “0“ level: <0.1VDD Duty cycle: 45/55 Rise/fall time: <6ns(fn<40MHz) <3ns(fn>40 MHz) HCMOS LVCMOS FREQUENCY RANGE OSCILLATION STATE OUTPUT CHARACTERISTICS OUTLINE DRAWING OF OCXO-20 CRYSTALS CERAMIC FILTERS OSCILLATORS SAW COMPONENTS CERAMIC RESONATORS Premium Quality by PETERMANN-TECHNIK Spec.01 • REV.00 • August 2013 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 D-86899 Landsberg am Lech Fon: +49/8191/305395 Fax: +49/8191/305397 www.petermann-technik.com [email protected] ISO 9001:2008 TEST CURCUIT ORDERING INFORMATION OC20-5-A-10.000MHz-S TYPE OUTPUT WAVEFORM S-SINE WAVE / H-HCMOS / L-LVCMOS OC14 / OC20 / OC25 / OC36 / OC50 VDD 3 for 3.3 Volt / 5 for 5 Volt / 12 for 12 Volt FREQUENCY FREQUENCY STABILITY See Table 2 See Table 1 PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS CERAMIC FILTERS OSCILLATORS SAW COMPONENTS CERAMIC RESONATORS Premium Quality by PETERMANN-TECHNIK Spec.01 • REV.00 • August 2013