KEMET Part Number: T419E156M010AC (CWR19FC156MAEZ) Capacitor, Tantalum, 15 uF, 5125, +/-20% Tol, 10 VDC (85C), Failure Rate=A General Information Supplier: Application: Sub Application: Part Type Description: Construction: Body Type: Termination: Footprint: RoHS: Symbol Dimensions (mm) Dimension Tolerance L 5.08 +/-0.38 W 2.54 +/-0.38 H 1.27 +/-0.38 K 0.76 MIN F 2.41 +0.13/-0.25 S 0.76 +0.025/-0.13 P 0.38 MIN A 3.56 NOM -P and R dimensions represents the minimum solderable area of the termination surface entirely below cutout (if one is present). MIL-PRF-55365/11(Non-ER) (ExtendedRange) SMD, MnO2, Molded, Military Equivalent Standard Chip-MnO2 SMD Chip Hot Solder Dipped 5125 No Specifications Capacitance: Tolerance: 15 uF +/-20% Voltage: 10 VDC (85C) Voltage: 6.7 VDC (125C) Temperature Range: Testing: Resistance/ESR: Failure Rate: Leakage Current: Dissipation Factor: Notes: -Note: When option C is selected for lead material, add an additional 0.38mm (0.015inch) to the tolerances for "L", "W", "H", "K" ,"F" and "S" KEMET -55/+125C Standard Testing Only 3 Ohms (100kHz) A 2 uA 8% Packaging Specifications Package Kind: T&R Package Size: 7in Package Quantity: 2500 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Generated 9/29/2015 - a2ac4fc5-e8ef-4b4e-8ad0-0939800de13c © 2006-2015 IntelliData.net