High Temperature (+260°C) Axial and Radial Ceramic Cased Capacitors (C3) TCR/TRR/TCA/TRA Series High temperature ceramic cased capacitors, with a new, unique design concept, are ideally suited for continuous operation up to +260°C. Problems associated with epoxy cased/epoxy potted capacitors, such as material deterioration, cracks in cases and potted areas, are nonexistent, even at +260°C. C0G X7R C0G (NP0) capacitors, which exhibit little change in capacitance with variations in temperature, are used in RF oscillators, precision timing circuits, wave filters, and other circuits requiring a predictable linear temperature coefficient. Conventional X7R materials lose up to 75% of the +25°C capacitance. Dissipation factor drops from 1.25% at +25°C to 0.2% at +260°C. At +120°C the ceramic undergoes a transformation (crystalline inversion) resulting in the material changing from ferroelectric to paraelectric - no piezoelectric behavior. Typical applications include oil well logging (down hole), jet engine controls and geophysical pressure probes. INSTALLATION: Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated 18-30 watts. Remove all traces of flux or other contamination resulting from the soldering operation. An intermittent conducting path between the leads, at high voltage, could cause breakdown. Soldering temperature should not exceed +300°C. PART NUMBER AND ORDERING INFORMATION T C R 06 B 103 K G PRODUCT FAMILY S TEST LEVEL T = High Temperature Axial and Radial Capacitors S = KEMET standard screening A = MIL-PRF-20, Group A Test (COG) A = MIL-PRF-39014 (X7R) X = Special TEMP. CHARACTERISTIC 260°C C = C0G (NP0)/BP R = X7R (BX) LEAD MATERIALS LEAD CONFIGURATION G = Gold Plated Copper Clad Steel W = Solder Coated Copper Clad Steel A = Axial R = Radial CAPACITANCE TOLERANCES J = ±5% M = ±20% K = ±10% Other Tolerances available upon request STYLE Case Size. See data sheet for detail dimensions VOLTAGE RATING CAPACITANCE CODE B = 50vdc D = 100vdc MARKING Manufacturer’s ID Capacitance Voltage Date Code Red dot = +260°C 20 EXAMPLE KEC 106J 50V 123 • 3 Digit code system expressed in picofarads (pF) 103 = 10,000pF 151 = 150pF 6R8 = 6.8pF © KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com High Temperature (+260°C) Axial and Radial Ceramic Cased Capacitors (C3) TCR/TCA Series S AXIAL RADIAL All Dimensions in Inches (mm) All Dimensions in Inches (mm) C0G DIELECTRIC AXIAL STYLE RADIAL 16 25 39 50 69 05 06 07 08 09 LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70) WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70) TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06) .100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81) --- .200 ± .015 (5.08 ±.38) .200 ± .015 (5.08 ±.38) .200 ± .015 (5.08 ±.38) --- S d Cap Cap Code 5.6pF 569 6.8 689 8.2 829 10 100 12 120 15 150 18 180 22 220 27 270 33 330 39 390 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 0.01 μF 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 --- --- --- .400 ± .015 .400 ± .015 (10.16 + .38) (10.16 + .38) .020 ± .002 .020 ± .002 .025 ± .002 .025 ± .002 .025 ± .002 .020 ± .002 .020 ± .002 .020 ± .002 .025 ± .002 .025 ± .002 (.508 ± .051) (.508 ± .051) (.635 ± .051) (.635 ± .051) (.635 ± .051) (.508 ± .051) (.508 ± .051) (.508 ± .051) (.635 ± .051) (.635 ± .051) WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 © KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com WVDC 50 100 21 High Temperature (+260°C) Axial and Radial Ceramic Cased Capacitors (C3) TRR/TRA Series RADIAL AXIAL S All Dimensions in Inches (mm) All Dimensions in Inches (mm) X7R DIELECTRIC AXIAL STYLE 22 RADIAL 16 25 39 50 69 05 06 07 08 09 LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70) WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40) .200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70) TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06) .100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81) .200 ± .015 (5.08 ±.38) .200 ± .015 (5.08 ±.38) .400 ± .015 (10.16 + .38) .400 ± .015 (10.16 + .38) .020 ± .002 (.508 ± .051) .020 ± .002 (.508 ± .051) .025 ± .002 (.635 ± .051) .025 ± .002 (.635 ± .051) S --- --- --- --- --- .200 ± .015 (5.08 ±.38) d .020 ± .002 (.508 ± .051) .020 ± .002 (.508 ± .051) .025 ± .002 (.635 ± .051) .025 ± .002 (.635 ± .051) .025 ± .002 (.635 ± .051) .020 ± .002 (.508 ± .051) Cap Cap Code 100pF 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 0.01 μF 103 0.012 123 0.015 153 0.018 183 0.022 223 0.027 273 0.033 333 0.039 393 0.047 473 0.056 563 0.068 683 0.082 823 0.10 104 0.12 124 0.15 154 0.18 184 0.22 224 0.27 274 0.33 334 0.39 394 0.47 474 0.56 564 0.68 684 0.82 824 1.0 105 1.2 125 1.5 155 1.8 185 2.0 205 2.2 225 2.7 275 3.3 335 3.9 395 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 100 WVDC 50 © KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 100