OAB908 Ultra Low Speed Side Inlet Blower Frame & Impeller Aluminum die-cast shell with UL94V-0 impeller Connection Lead Wires Motor Single phase, capacitor induction, 2/4 pole, inner rotor, thermal protection -Frame: Aluminum die-cast, natural color treatment case, steel plate housing cover Bearing System Dual ball - sealed Model Number Part Number Nominal Voltage Voltage Range Rated Power Rated Speed (RPM) Airflow (CFM) Noise Level (dB) Max. Static Pressure Knight Electronics, Inc. 10557 Metric Drive Dallas, Texas 75243 214-340-0265 AC Blower, ball bearing 183x190x70mm (7.2”x 7.5”x 2.8”) Operating Temp: Ambient non-condensing allowable thermal range -20C~+75C -L10 Life: MTBF life test 80,000 hours at +45C, 40,000 hours at +60C -Dielectric Strength: Over 1 min. at 1,500 VAC, 0.5mA, 50/60 Hz -Insulation Resistance: Over 100 Mega Ohm at DC 500V OAB908AN-11-3 OAB908AN-22-3 264331000 264631000 60 ~ 130 100 ~ 260 115 VAC 60 W 1000 50 40 1.1 “H2O 230 VAC 60 W 1000 50 40 1.1 “H2O Orion Fans Information and data is subject to change without prior notification.