SLI-560 / SLI-570 / SLI-580 Series LED lamps Ultra high bright circular LED lamps (φ5.0mm) SLI-560 / SLI-570 / SLI-580 Series The SLI-560, SLI-570 and SLI-580 series are high luminance LEDs which give you a choice of narrow to wide viewing angles. One red type, one orange type and yellow type are available in three packages for a total of nine different types, and they suitable for use in a wide variety of applications. !External dimensions (Units : mm) φ5.6 SLI-580 CATHODE 0.5 (2.5) (7.5) 8.5±0.3 1.0 CATHODE 2.5±1.0 24.0Min. 2.5±1.0 (2.5) 4−0.6 2.5±1.0 24.0Min. 4−0.6 24.0Min. 4−0.6 0.5 1.0Max. (7.65) 8.65±0.3 φ5.0 1.0 1.0 (6.5) 7.5±0.3 φ5.0 1.0Max. φ5.0 φ5.6 SLI-570 φ5.6 SLI-560 1.0Max. !Features 1) Super high brightness using AlInGaP. 2) 3 types of viewing angle is available. 3) High reliability. 4) Suitable for information board application. 0.5 (2.5) CATHODE Tolerances are ±0.2 unless otherwise noted: !Selection guide Emitting color Red Orange Yellow Lens Narrow tupe SLI-580UT3F SLI-580DT3F SLI-580YT3F Medium tupe SLI-570UT3F SLI-570DT3F SLI-570YT3F Wide viewng tupe SLI-560UT3F SLI-560DT3F SLI-560YT3F 1/4 SLI-560 / SLI-570 / SLI-580 Series LED lamps !Absolute maximum ratings (Ta=25°C) Symbol Maximum ratings Unit Power dissipation PD 125 mW Forward current IF 50 mA Peak forward current IFP 200 mA Reverse voltage VR 9 V Parameter Operating temperature Topr −30~+85 °C Storage temperature Tstg −40~+100 °C Soldering temperature − 260°C 5 seconds maximum − !Electrical and optical characteristics (Ta=25°C) Red Parameter Symbol Conditions VF Forward voltage Yellow Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. IF=20mA − 1.9 2.5 − 1.9 2.5 − 1.9 2.5 Unit V Reverse current IR VR=9V − − 100 − − 100 − − 100 µA Peak wavelength λP IF=20mA − 630 − − 611 − − 591 − nm Spectral line half width ∆λ IF=20mA − 20 − − 17 − − 15 − nm − deg SLI-560 Viewing angle SLI-570 40 − 2θ 1/2 − SLI-580 25 40 − − 10 !Luminous intensity vs. wavelength 25 40 − − 10 25 10 !Luminous intensity 1.0 Axial Luminous Intensity Orange λP Type Min. Typ. 300 1000 − 630 SLI-560UT3F SLI-570UT3F 900 3000 − 0.6 SLI-580UT3F 1350 5000 − 300 1000 0.4 SLI-560DT3F SLI-570DT3F − 900 3000 − SLI-580DT3F 1350 5000 SLI-560YT3F 300 1000 − 610 2500 − SLI-580YT3F 1350 5000 − Color Orange Yellow 0.8 Red Red Orange 611 0.2 0 500 550 600 650 Wavelength : λP (nm) Fig.1 700 750 Yellow 591 SLI-570YT3F Max. Unit mcd − Note : 1. Measured at IF=20mA 2. The specification is subject to be without notice. We would like you to refer to the latest specification in use. 2/4 SLI-560 / SLI-570 / SLI-580 Series LED lamps !Directional pattern ANGLE (˚) 10 20 0 ANGLE (˚) 10 20 20 30 40 30 40 50 80 80 90 100 90 100 50 70 70 80 80 60 60 70 70 0 20 50 60 60 50 10 40 50 50 90 100 0 30 30 40 10 50 0 90 100 50 RELATIVE LUMINOUS INTENSITY (%) RELATIVE LUMINOUS INTENSITY (%) Fig.2 SLI-560 Directional patterm Fig.3 SLI-570 Directional patterm ANGLE (˚) 0 10 20 10 20 30 30 40 40 50 50 60 60 70 70 80 80 90 100 50 0 90 100 50 RELATIVE LUMINOUS INTENSITY (%) Fig.4 SLI-580 Directional patterm !Electrical characteristic curves 1.6 100 10 1 0.1 1.0 1.5 2.0 2.5 FORWARD VOLTAGE : VF (V) Fig.5 Forward current vs. forward voltage 3.0 1.4 1.2 1.0 UT 0.8 YT, DT 0.6 0.4 10 IF=20mA −20 0 20 40 60 Ta=25°C RELATIVE LUMINOUS INTENSITY Ta=25°C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 1000 80 1 0.1 0.01 0.1 1 10 CASE TEMPERATURE : Tc (°C) FORWARD CURRENT : IF (mA) Fig.6 Luminous intensity vs. case temperature Fig.7 Luminous intensity vs. forward current 100 3/4 SLI-560 / SLI-570 / SLI-580 Series MAXIMUM FORWARD CURRENT : IF Max. (mA) RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT LED lamps 10 4 5kHz 500kHz 50kHz 1kHz 100kHz 10kHz 1 10 100 1000 10000 100000 PULSE DURATION : tw (µs) Fig.8 Ratio maximum tolerable peak vs. pulse duration 60 50 40 30 20 10 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (˚C) Fig.9 Maximum forward current vs. ambient temperature (Derating) 4/4