NHD-5.0-800480TF-ATXL# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD5.0800480TFATXL# Newhaven Display 5.0” Diagonal 800xRGBx480 Pixels Model Built-in Driver / No Controller White LED Backlight TFT 12:00 Optimal View, Enhanced Optical Characteristics, Wide Temperature RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Court Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 2 3 Date 3/20/2013 8/28/2013 9/16/2014 9/2/15 Description Initial Release Electrical characteristics updated Electrical characteristics updated Driver, Electrical, Optical characteristics updated Functions and Features 800xRGBx480 resolution, up to 16.7M colors 18-LED backlight 24 bit RGB interface Enhanced Optical Characteristics [2] Changed by AK AK ML AK L A I Mechanical Drawing 1 3 23±0.2 1 40 3.5±0.3 0.5±0.1 O C P0.5*39=19.5±0.05 70.06±0.3 Notes: 1. Display size: 5.0” TFT 2. Viewing direction: Full view 3. Display mode: Transmissive/Normally white/Anti-glare 4. Operation temperature: -200C to +700C 5. Storage temperature: -300C to +800C 6. Power supply voltage: 3.3V 7. Backlight: White (18 LEDs) / 19.2V (typ) / 60mA (typ) 8. Brightness: 450 cd/m² (typ) 9. RoHS compliant 1 2 BACK S TIFFEN ER (PI) 46±0.3 W=0.3 0.3±0.05 A+ S I NGLE A REA 5±0.5 F N C OMPONE NT AREA Newhaven Display NHD-5.0-800480TF-ATXL#_rev14 20±0.2 E D I 800(RGB)*480 C on ta ct side 64.8(TFT A,A) 67.9±0.2(Bezel Opening) 75.8±0.3 5.0" TFT 6 Description Date T N 3.1±0.2 (6.35) FRONT 108(TFT A,A) 16.15±0.3 D 5 Rev 4.8±0.2 B C 4 120.7±0.3 111.1±0.2(Bezel Opening) (3.36) 1.82±0.2 A 2 20.5±0.1 10±0.2 C R0. 3 Date 09/02/15 Unit Gen. Tolerance ±0.3mm 4 mm 5 Model: NHD-5.0-800480TF-ATXL# 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] B D K- 3 A Pin Description Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LEDLED+ GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN STBYB HSD VSD DEN NC GND XR YD XL YU External Connection LED Power Supply LED Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Ground for Backlight Backlight Power Supply (60mA @ 19.2V) Ground Power supply for LCD and logic (3.3V) Red Data Signals Green Data Signals Blue Data Signals Ground Clock for input data (Rising Edge) 1: Normal Operation; 0: Standby Mode Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended LCD connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Backlight connector: on LCD connector Mates with: --- [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Symbol Top Tst VDD IDD Vih Vil Voh Vol Condition Absolute Max Absolute Max VDD=3.3V VLED ILED Min. -20 -30 3.0 0.7*VDD 0 VDD-0.4 - Typ. 3.3 77 - Max. +70 +80 3.6 VDD 0.3*VDD GND+0.4 Unit ⁰C ⁰C V mA V V V V 17.4 - 19.2 60 19.8 75 V mA Min. 60 50 60 60 360 - Typ. 75 65 75 75 350 450 20 Max. 30 Unit ⁰ ⁰ ⁰ ⁰ Optical Characteristics: Item Viewing Angle –Top Viewing Angle –Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time Symbol Condition Cr ≥ 10 Cr YL Tr+Tf - Driver Information Built-in OTA7001A Source Driver: http://www.newhavendisplay.com/app_notes/OTA7001A.pdf Built in OTD9960A Gate Driver: http://www.newhavendisplay.com/app_notes/OTD9960A.pdf [5] 2 cd/m ms Timing Characteristics [6] Vertical Input Timing Horizontal Input Timing [7] Input Clock and Data Timing Source Output Timing Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [8] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C , 96hrs 1,2 +70⁰C 96hrs 2 -20⁰C , 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -20⁰C,60min -> 70⁰C,60min = 1 cycle 20 cycles 10-50Hz, 5G in each of 3 directions X,Y,Z For 30 minutes each direction Air: 8kV, 150pF, 330Ω, 5 times Contact: 4kV, 150pF, 330Ω, 5 times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [9] Note +80⁰C , 96hrs 3