NHD-7.0-800480EF-ATXL#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD7.0800480EFATXL#T- Newhaven Display 7.0” Diagonal 800xRGBx480 Pixels Model Built-in Driver / No Controller White LED Backlight TFT 12:00 Optimal View, Wide Temperature RoHS Compliant Resistive Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 2 Date 8/29/2013 8/12/2014 4/1/2015 Description Initial Release Touch Panel Characteristics updated Mechanical drawing updated Functions and Features 800xRGBx480 resolution LED backlight 24-bit digital RGB interface 16.7M colors 4-wire resistive Touch Panel [2] Changed by ML ML AK L A I Mechanical Drawing 165±0.3 164.3±0.2/TP V,A156.68/TP 156.7±0.2/BZ OPENING A,A155.68/TP 4 0.7±0.2 (6) 6.11 (6.5) (49.7) DETAIL A 1 2 BACK 10±0.5 (17.07) 1 0.3±0.05 0.3±0.05 4 74.93±0.5 1 CENTER LINE 22.4±0.5 A+ K- 40 1 SYMBOL LED-K LED-A GND VDD R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND DCLK DISP HSYNC VSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) W=0.3±0.03 P0.5X(40-1)=19.5±0.05 0.5±0.1 20.5±0.1 04/01/15 Unit Gen. Tolerance ±0.3mm 4 mm 5 Model: NHD-7.0-800480EF-ATXL#-T 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] C D Date 5*3=15EA,20mA*3=60mA 3 B PIN Assignment DETAIL A (3:1) LED CIRCUIT A .2 NOTES: 1.Display type: 7" TFT / Anti-glare 2.Viewing direction: 12 O'CLOCK 3.Gray Scale Inversion direction: 6 O'CLOCK 4.Polarizer mode: Transmissive/Normal white 5.Operation temperature: -20°C to +70°C 6.Storage temperature: -30°C to +80°C 7.Logic power supply voltage: 3.3V 8.Backlight: White / 16V / 60mA 9.ROHS must be complied P1*3=3 5±0.1 4 4-R2 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Date R0 O C 1 1.5 Max. Newhaven Display NHD-7.0-800480EF-ATXL#-T 3.5±0.3 1.75 0.3±0.03 40 COMPONENT AREA W=0.5±0.05 P1X3=3±0.1 (86.1) 20.39±0.5 1 D F N (39) 1 YU YD XL XR 5±0.3 C (4) 4 COMPONENT AREA 5 71±0.5 (4) 15±1 COVERLAYER OPEN STIFFENER (PI) YD Contact side ACTIVE AREA CENTER FRONT E D I XR 78.17±0.5 85.63 A.A 89.1P0.2/BZ OPENING V,A88.52/TP A,A87.52/TP 104±0.3 OUTLINE 99±0.2/TP TEAR TAPE 800(RGB)*480 XL 6 Description T N (80.82) YU B 4.7±0.35 (7.26) 153.84 A.A 5 Rev 36.04 4.5±0.5 3 COVERLAYER OPEN 2 5.3 (5.499) (5.999) (6.889) A 2.019±0.2 1 Pin Description TFT: Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LED-K LED-A GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN DISP HSD VSD DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Backlight Cathode Backlight Anode (60mA @ 16V) Ground Supply Voltage for LCD (+3.3V) Red Data signals Green Data signals Blue Data signals Ground Clock for Input data Display ON/OFF DISP=1:Display ON Line Synchronization signal Frame Synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Touch Panel: Pin No. 1 2 3 4 Symbol XL YD XR YU Connection Touch Panel Touch Panel Touch Panel Touch Panel Function Description Touch Panel – LEFT Touch Panel – DOWN Touch Panel – RIGHT Touch Panel – UP Recommended connector: 1.0mm pitch 4-Conductor FFC. Molex p/n: 52207-0485 (top contact) Driver/Controller Information Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf Built-in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level Input “L” Level Input “H” Level Output “L” Level Output Backlight Supply Voltage Backlight Supply Current Symbol Top Tst VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD=3.3V, 25oC - Min. -20 -30 3.0 60 0.7*VDD GND VDD-0.4 - Typ. 3.3 85 - Max. +70 +80 3.6 120 VDD 0.3*VDD GND+0.4 Unit ⁰C ⁰C V mA V V V V VLED ILED VLED=16V 14.5 45 16 60 16.5 75 V mA Typ. 55 65 70 70 400 220 25 Max. 35 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms Optical Characteristics Item Viewing Angle – Top Viewing Angle – Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time Symbol Cr L Tr+Tf Condition Cr ≥ 10 - Min. 170 - Viewing angles based on 6:00 gray scale inversion Touch Panel Characteristics Item Linearity Terminal Resistance – X-Axis Terminal Resistance – Y-Axis Insulation Resistance Operating Voltage Chattering Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. -3 50 350 20 10 20,000 1,000,000 3 Typ. - Max. 3 400 1100 10 10 100 - [5] Unit % Ω Ω MΩ V ms g Characters Touches H Timing Characteristics Horizontal Timing Vertical Timing [6] Horizontal Timing Vertical Timing [7] Parallel 24-bit RGB mode Input Clock and Data Timing Source Output Timing [8] Vertical Timing HV (Cascade) Vertical Timing DE (Cascade) Gate Output Timing (Cascade) [9] Vertical Timing HV (Dual Gate) Vertical Timing DE (Dual Gate) Gate Output Timing (Dual Gate) [10] Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [11] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C , 96hrs 1,2 +70⁰C, 96hrs 2 -20⁰C , 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -30⁰C, 30min -> 80⁰C, 30min, Change time: 5min, 10 cycles 10-55Hz , 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [12] Note +80⁰C , 96hrs 3