NHD-5.0-800480TF-ATXI# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD5.0800480TFATXI# Newhaven Display 5.0” Diagonal 800xRGBx480 pixels Model Built-in driver / NO Controller White LED backlight TFT 6:00 viewing angle, Wide Temp RoHS Compliant Newhaven Display International, Inc. 2511 Technology Drive, Suite 101 Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 Date 2/1/2012 3/18/2013 Description Initial Release Timing Characteristics added Functions and Features • • • • • 800xRGBx480 resolution, up to 16.7M colors 14-LED backlight 24 bit RGB interface 4-wire resistive touch panel available Capacitive touch panel available [2] Changed by SB AK [3] Pin Description Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LEDLED+ GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN STBYB HSYNC VSYNC DE NC GND XR YD XL YU External Connection LED Power Supply LED Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Ground for Backlight Backlight Power Supply (20mA @ ~23.1V) Ground Power supply for LCD and logic (3.3V) Red Data Signals Green Data Signals Blue Data Signals Ground Clock for input data (Rising Edge) 1: Normal Operation; 0: Standby Mode Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended LCD connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54132-4097 Backlight connector: on LCD connector Mates with: --- [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Symbol Top Tst VDD IDD Vih Vil Voh Vol Backlight Supply Voltage Backlight Supply Current Backlight Power Consumption VLED ILED PBL Condition Absolute Max Absolute Max VDD=3.3 Min. -20 -30 3.0 0.7VDD 0 VDD-0.4 - Typ. 3.3 132 - Max. +70 +80 3.6 VDD 0.3VDD GND+0.4 Unit ⁰C ⁰C V mA V V V V VLED=23.1V - 23.1 20 924 25 - V mA mW Min. 500 - Typ. 50 70 70 70 600 250 5 15 Max. 15 30 Unit ⁰ ⁰ ⁰ ⁰ Optical Characteristics Item Viewing Angle –Top Viewing Angle –Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise) Response Time (fall) Symbol Cr YL Tr Tr Condition Cr ≥10 Cr ≥10 Cr ≥ 10 Cr ≥ 10 - cd/m ms ms Driver Information Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf Built in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf [5] 2 Timing Characteristics [6] Horizontal Timing Vertical Timing [7] Parallel 24-bit RGB mode Input Clock and Data Timing Source Output Timing [8] Vertical Timing HV (Cascade) Vertical Timing DE (Cascade) Gate Output Timing [9] Vertical Timing HV (Dual Gate) Vertical Timing DE (Dual Gate) Gate Output Timing (Dual Gate) [10] Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [11] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C , 200hrs 1,2 +70⁰C 200hrs 2 -20⁰C , 200hrs 1,2 +60⁰C , 90% RH , 96hrs 1,2 -20⁰C,30min -> 25⁰C,5min >70⁰C,30min = 1 cycle 10 cycles 10-55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [12] Note +80⁰C , 200hrs 3