DEA1X3D101JN2A # indicates a package specification code. < List of part numbers with package codes > DEA1X3D101JN2A Shape References Packaging Specifications Ammo pack taping type L size or outer diameter D (mm) 7.0 mm max. T size 5.0 mm max. Lead spacing F 5.0 +0.8/-0.2mm Lead diameter d 0.6 ±0.05mm Paint dripping e Up to the end of crimp Minimum quantity 1500 Specifications Capacitance 100pF ±5% Rated voltage 2000Vdc Temperature characteristics (complied standard) SL(JIS) Temperature coefficient +350 to -1000ppm/℃ Temperature range of temperature characteristics 20 to 85℃ Operating temperature range -25 to 125℃ 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2015/09/30 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Frequency characteristics (ESR, Impedance) S parameter (Smith chart S11) DC bias characteristics AC voltage characteristics Capacitance - temperature characteristics 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2015/09/30