RF 1series Diodes Fast recovery Diodes (Silicon Epitaxial Planar) RF 1 series zExternal dimensions (Unit : mm) zApplications High frequency rectification CPD 5.5 1.5 2.3 0.5 5.6 5.5 zFeatures 1) Ultra low VF very fast recovery 2) Fast recovery 3) Low switching loss 4) Standard package TO-220FN, CPD 0.55 1.2 2.3 2.3 (1) (2) (3) TO-220FN φ3.2 4.5 2.8 1.2 1.3 14.0 5.0 8.0 10.0 15.0 12.0 (1) Anode (2) Cathode (3) Anode 0.8 2.54 2.54 2.6 0.75 (1)(2)(3) TO-220FN Center tap type cathode common, Dual elements VR IO 200V Dual Single 200V Dual Single − − − 10A − − − − − 16A − − − 20A − − − − − − 30A Center tap type cathode common, Dual elements Ultra low VF type FRD Fast recovery type FRD 6A 15A CPD − (1) Anode (2) Cathode (3) Anode VR IO Ultra low VF type FRD Fast recovery type FRD Dual 3A − 5A − Dual − 200V Single − − − 6A 10A 200V Single − − − − 1/2 RF 1series Diodes zAbsolute maximum ratings (Ta=25°C) Parameter Symbol Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current VRM VR IO Forward peak surge current (60Hz 1cyc.) IFSM Junction temperature Storage temperature Tj Tstg Limits Unit RF071M2S RF101L2S RF301B2S RF501B2S RF601B2D RF601T2D RF1001T2D RF1601T2D RF2001T2D 200 200 200 V 200 200 200 200 200 200 200 200 200 V 200 200 200 200 200 200 ∗1 ∗1 ∗1 ∗1 ∗1 ∗1 ∗1 ∗1 ∗1 0.7 1.0 3.0 5.0 6.0 6.0 10.0 16.0 20.0 A 15 20 60 60 60 80 80 80 A 80 C C 150 150 150 150 150 150 150 150 150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 −55 to +150 ∗ Mounting on glass epoxi board zElectrical characteristics (Ta=25°C) IR trr 200V Max. 0.850V VF Typ. 0.790V IF 0.7A Max. 10µA Typ. 10nA Max. 25ns Typ. 12ns 1A 200V 0.870V 0.815V 1A 10µA 10nA 25ns 12ns Single PMDS RF301B2S 3A 200V 0.930V 0.870V 3A 10µA 10nA 25ns 14ns Cathode common CPD(D-pack) RF501B2S 5A 200V 0.930V 0.870V 5A 10µA 10nA 30ns 15ns Single CPD(D-pack) RF601B2D 6A 200V 0.930V 0.870V 3A 10µA 10nA 25ns 14ns Cathode common CPD(D-pack) RF601T2D 6A 200V 0.930V 0.870V 3A 10µA 10nA 25ns 14ns Cathode common TO-220FN RF1001T2D 10A 200V 0.930V 0.870V 5A 10µA 10nA 30ns 15ns Cathode common TO-220FN RF1601T2D 16A 200V 0.930V 0.870V 8A 10µA 10nA 30ns 18ns Cathode common TO-220FN RF2001T2D 20A 200V 0.930V 0.870V 10A 10µA 10nA 30ns 20ns Cathode common TO-220FN Part No. IO VR RF071M2S 0.7A RF101L2S Configurate Package Single PMDU 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0