LQH5BPN470M38#

LQH5BPN470M38#
# indicates a package specification code.
< List of part numbers with package codes >
LQH5BPN470M38L , LQH5BPN470M38K
Shape
Notes
When applied Rated current to the Products, Inductance will be within ±30% of
initial inductance value range.
When applied Rated current to the Products, temperature rise caused by
self-generated heat shall be limited to 40℃ max.(Ambient temperature 85℃).
Keep the temperature (ambient temperature plus self-generation of heat) under
125℃.
References
Packaging
code
L size
4.9 ±0.2mm
W size
4.9 ±0.2mm
Specifications
Minimum quantity
φ180mm Embossed taping
400
φ330mm Embossed taping
1500
Mass (Typ.)
T size
4.0mm max.
1 piece
Size code in inch (mm)
0.35g
2020 (5050)
Specifications
Inductance
47µH ±20%
Inductance test frequency
100kHz
Rated current (Isat) (Based on Inductance change)
1100mA
Rated current (Itemp) (Based on Temperature rise)
1100mA
Max. of DC resistance
0.264Ω
Avg. of DC resistance
0.22Ω±20%
Self resonance frequency (min.)
6.0MHz
Operating temperature range (Self-temperature rise
is included)
-40∼125℃
Operating temperature range (Self-temperature rise
is not included)
-40∼85℃
Class of magnetic shield
Magnetic shield of magnetic
powder in resin
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : http://www.murata.com/
Last updated: 2015/09/30
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
Temperature rise characteristics (Typ.)
2 of 2
This PDF data has only typical specifications because there is no space
for detailed specifications.
Therefore, please reviewour product specifications or consult the
approval sheet for product specifications before ordering.
Last updated: 2015/09/30