Bat Handle Toggle Features Neoprene Seal Toggle (54−456 thru 54−459, 54−659 ONLY) Slow Make, Slow Break Contacts AC Rated, Suitable for Low Voltage DC Also Standard .500” Dia Mounting Hole Various Terminal Selections 15/32−32 UNS−2A Thread S1 .687 (17.44)** Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .670 (17.02) .348 (8.84) .634 (16.1) 1.134 (28.8) Terminal Types b: .250” Tab (Q.C.) a: Solder Lug Circuitry 54−001 54−002 54−006 54−007 54−008 54−009 54−010 54−023 54−024 54−025 54−456* 54−457* 54−458* 54−459* 54−659* SPST SPDT SPST SPST SPST SPDT SPDT SPST SPDT SPDT SPST SPST SPST SPDT SPDT Action ON (ON) ON ON ON ON ON ON ON ON ON (ON) ON ON (ON) NONE OFF NONE NONE NONE OFF OFF NONE NONE OFF NONE NONE NONE OFF OFF Actuator (OFF) (ON) OFF OFF OFF ON ON OFF ON ON OFF OFF OFF ON (ON) Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate Plate SPECIAL NOTE: ( ) = Momentary Function * Neoprene Seal Toggle .370 (9.39) .141 (3.58) .250 (6.35) .286 (7.26) d: “3−in−1” Combi−Terminal Diag No. S1c S1c S1a S1b S1c S1b S1c S1d S1d S1d S1c S1c S1b S1b S1b #6−32NC−2 Thread .437 (11.08) .330 (8.38) NTE Type No. c: Screw (Assembled) .075 (1.91) Dia .125 (3.18) Dia .187 (4.74) ** 2.000 (50.8) 54−457 Only Specifications Current Rating: 15A 125VAC, 10A 250VAC, 3/4 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 to +150 F (−17.8 to +65.6 C) Electrical Life: 50,000 cycles maintained, 25,000 cycles momentary Mechanical Life: 100,000 cycles Terminal Type: Refer to Diag No. in Table Mounting Hole: .500 (12.7) Bat Handle Toggle Features S36 Quick Make, Quick Break Wiping Action 6” Wire Leads Brass or Plastic Actuator 15/32−32 UNS−2A Thread .562 (14.27) Keyway .080 (2.03) x .040 (1.02) DP .325 (8.25) .615 (15.62) .980 (24.89) .640 (16.25) Terminal Types Integrated Wire 6.000 (152.4) .500 (12.7) 18AWG Specifications NTE Type No. 54−130 54−131 Circuitry SPST SPST Action OFF OFF NTE Electronics, Inc. NONE NONE ON ON Actuator Diag No. Brass/Nickel Plate Plastic S36 S36 Voice (973) 748−5089 Current Rating: 10A 250VAC, 8A 125VDC, 4A 250VDC, 1/3 HP 125VAC Dielectric Strength: 1000V RMS (min.) Temperature Rating: +149 F (+65 C) Max Electrical Life: 25,000 cycles Min Mechanical Life: 100,000 cycles Terminal Type: Integrated Wire Mounting Hole: .500 (12.7) FAX (973) 748−6224 http://www.nteinc.com 1 Bat Handle Toggle Features S1 Slow Make, Slow Break Contacts AC Rated, Suitable for Low Voltage DC Also Standard .500” Dia Mounting Hole Screw Mount Terminals 15/32−32 UNS−2A Thread .687 (17.44) Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .670 (17.02) .348 (8.84) .634 (16.1) 1.134 (28.8) Terminal Types c: Screw (Assembled) #6−32NC−2 Thread .370 (9.39) .141 (3.58) .286 (7.26) Specifications NTE Type No. 54−094 54−096 54−097 54−143 Circuitry SPST SPDT SPDT SPST Action (ON) ON ON ON NONE NONE NONE NONE Actuator OFF ON (ON) OFF Brass/Nickel Brass/Nickel Brass/Nickel Brass/Nickel Plate Plate Plate Plate Diag No. S1c S1c S1c S1c SPECIAL NOTE: ( ) = Momentary Function Current Rating: 6A 125VAC, 3A 250VAC, 1/4 HP 120−240VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 to +150 F (−17.8 to +65.6 C) Electrical Life: 50,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Bat Handle Toggle Features 15/32−32 UNS−2A Thread S3 AC Rated, General Purpose Industry Standard .500” Dia Mounting Hole .250” Quick Connect Terminals .687 (17.44) Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .585 (14.86) .312 (7.92) .875 (22.22) .522 (13.26) Terminal Types b: .250” Tab (Q.C.) .075 (1.9) Dia .250 (6.35) NTE Type No. Circuitry Action Actuator Diag No. 54−005 SPST ON NONE OFF Brass/Nickel Plate S3b 54−098 SPDT ON NONE ON Brass/Nickel Plate S3b 2 NTE Electronics, Inc. Specifications Current Rating: 54−005: 20A 125VAC, 10A 250VAC, 1 1/2 HP 125−250VAC 54−098: 10A 125VAC, 5A 250VAC, 1/2 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32 to +185 F (0 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: .250” Tab Q.C. Mounting Hole: .500 (12.7) Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Bat Handle Toggle Features S97 Slow−Make/Slow−Break Butt Contact 1 HP, 125−250VAC 15/32−32 UNS−2A Thread .562 (14.27) Keyway .080 (2.03) x .040 (1.02) DP .325 (8.25) .465 (11.81) .925 (23.5) .660 (16.8) Terminal Types b: .250” Tab (Q.C.) c: Screw (Assembled) #6−32NC−2 Thread .415 (10.54) NTE Type No. 54−579 54−580 54−581 54−582 54−583 54−584 54−585 54−586 54−593 54−594 54−595 54−596 54−597 54−598 54−599 54−600 Circuitry SPST SPST SPST SPDT SPDT SPDT SPDT SPDT SPST SPST SPST SPDT SPDT SPDT SPDT SPDT Action ON (ON) ON ON ON (ON) (ON) (ON) ON (ON) ON ON ON (ON) (ON) (ON) NONE NONE NONE NONE OFF NONE OFF OFF NONE NONE NONE NONE OFF NONE OFF OFF OFF OFF (OFF) ON ON ON ON (ON) OFF OFF (OFF) ON ON ON ON (ON) Actuator Diag No. Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass S97b S97b S97b S97b S97b S97b S97b S97b S97c S97c S97c S97c S97c S97c S97c S97c .250 (6.35) .343 (8.71) .141 (3.58) .286 (7.26) Specifications Current Rating: 20A 125VAC, 10A 250VAC, 1 HP 125−250VAC Insulation Resistance: 109 ohms (min.) Dielectric Strength: 1500V RMS (min.) Temperature Rating: +14 to +149 F (−10 to +65 C) Electrical Life: 10,000 cycles (min.) at full load Mechanical Life: 30,000 cycles (min.) Terminal Type: Refer to Diag. No. in Table Mounting Hole: .500 (12.7) SPECIAL NOTE: ( ) = Momentary Function Bat Handle Toggle Features S98 Slow−Make/Slow−Break Butt Contact 1 HP, 125−250VAC 15/32−32 UNS−2A Thread .325 (8.25) .562 (14.27) Keyway .080 (2.03) x .040 (1.02) DP .665 (16.89) 1.130 (28.7) .690 (17.5) Terminal Types b: .250” Tab (Q.C.) .415 (10.54) NTE Type No. 54−590 54−591 54−592 Circuitry DPST DPDT DPDT Action ON ON ON NTE Electronics, Inc. NONE NONE OFF OFF ON ON Actuator Diag No. Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass S98b S98b S98b Voice (973) 748−5089 .250 (6.35) Specifications Current Rating: 20A 125VAC, 10A 250VAC, 1 HP 125−250VAC Insulation Resistance: 109 ohms (min.) Dielectric Strength: 1500V RMS (min.) Temperature Rating: +14 to +149 F (−10 to +65 C) Electrical Life: 10,000 cycles (min.) at full load Mechanical Life: 30,000 cycles (min.) Terminal Type: .250” Tab Q.C. Mounting Hole: .500 (12.7) FAX (973) 748−6224 http://www.nteinc.com 3 Bat Handle Toggle Features S97 Slow−Make/Slow−Break Butt Contact 3/4 HP, 125−250VAC 15/32−32 UNS−2A Thread .562 (14.27) Keyway .080 (2.03) x .040 (1.02) DP .325 (8.25) .465 (11.81) .925 (23.5) .660 (16.8) Terminal Types b: .250” Tab (Q.C.) c: Screw (Assembled) #6−32NC−2 Thread .415 (10.54) NTE Type No. 54−610 54−611 54−612 54−613 54−614 54−615 54−616 54−617 54−619 54−620 54−621 54−622 54−623 54−624 54−625 54−626 Circuitry SPST SPST SPST SPDT SPDT SPDT SPDT SPDT SPST SPST SPST SPDT SPDT SPDT SPDT SPDT Action ON (ON) ON ON ON (ON) (ON) (ON) ON (ON) ON ON ON (ON) (ON) (ON) NONE NONE NONE NONE OFF NONE OFF OFF NONE NONE NONE NONE OFF NONE OFF OFF OFF OFF (OFF) ON ON ON ON (ON) OFF OFF (OFF) ON ON ON ON (ON) Actuator Diag No. Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass S97c S97c S97c S97c S97c S97c S97c S97c S97b S97b S97b S97b S97b S97b S97b S97b .250 (6.35) .343 (8.71) .141 (3.58) .286 (7.26) Specifications Current Rating: 20A 125VAC, 10A 250VAC, 3/4 HP 125−250VAC Insulation Resistance: 109 ohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +14 to +149 F (−10 to +65 C) Electrical Life: 10,000 cycles (min.) at full load Mechanical Life: 30,000 cycles (min.) Terminal Type: Refer to Diag. No. in Table Mounting Hole: .500 (12.7) SPECIAL NOTE: ( ) = Momentary Function Bat Handle Toggle Features S98 Slow−Make/Slow−Break Butt Contact 3/4 HP, 125−250VAC 15/32−32 UNS−2A Thread .562 (14.27) Keyway .080 (2.03) x .040 (1.02) DP .325 (8.25) .665 (16.89) 1.130 (28.7) Terminal Types b: .250” Tab (Q.C.) .690 (17.5) c: Screw (Assembled) #6−32NC−2 Thread .415 (10.54) .250 (6.35) .343 (8.71) .141 (3.58) .286 (7.26) Specifications NTE Type No. 54−602 54−603 54−604 54−606 54−607 54−608 4 Circuitry DPST DPDT DPDT DPST DPDT DPDT Action ON ON ON ON ON ON NONE NONE OFF NONE NONE OFF OFF ON ON OFF ON ON Actuator Diag No. Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass S98c S98c S98c S98b S98b S98b NTE Electronics, Inc. Current Rating: 20A 125VAC, 10A 250VAC, 3/4 HP 125−250VAC Insulation Resistance: 109 ohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +14 to +149 F (−10 to +65 C) Electrical Life: 10,000 cycles (min.) at full load Mechanical Life: 30,000 cycles (min.) Terminal Type: Refer to Diag. No. in Table Mounting Hole: .500 (12.7) Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Bat Handle Toggle Features S14 Quick Make, Quick Break Contacts AC/DC Shallow Back Panel Applications Standard .500” Dia Mounting Hole .687 (17.46) 15/32−32 UNS−2A Thread Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .560 (14.22) .890 (22.6) .524 (13.31) Terminal Types a: Solder Lug (End) c: Screw (Assembled) #6−32 NC−2 Thread .270 (6.86) .270 (6.85) .415 (10.54) .080 (2.03) Dia NTE Type No. Circuitry Action Actuator Diag No. 54−070 SPST ON NONE OFF Brass/Nickel Plate S14a 54−071 SPST ON NONE OFF Brass/Nickel Plate S14c Specifications Current Rating: 6A 125VAC, 3A 250VAC, AC/DC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 to +150 F (−17.8 to +65.6 C) Electrical Life: 25,000 cycles Mechanical Life: 15,000 cycles Terminal Type: Refer to Diag No. in Table Mounting Hole: .500 (12.7) Bat Handle Toggle Features .689 (17.5) S32 Waterproof Types Available on Page 18 a: Solder Lug/Quick Connect 15/32 32 NS Thread Keway .413 (10.5) .177 (4.5) .122 (3.1) Dia .590 (15.0) .433 (11.0) .031 (0.80) .279 (7.1) .586 (14.9) .250 (6.35) c: Screw (Assembled) 1.161 (29.5) NTE Type No. Circuitry Action Actuator Diag No. 54−348 SPST ON NONE OFF Nickel Plated Brass S32a 54−349 SPDT ON NONE ON Nickel Plated Brass S32a 54−350 SPDT ON OFF ON Nickel Plated Brass S32a 54−351 SPDT (ON) NONE ON Nickel Plated Brass S32a 54−352 SPDT (ON) OFF (ON) Nickel Plated Brass S32a 54−353 SPDT ON OFF (ON) Nickel Plated Brass S32a 54−354 SPST ON NONE OFF Nickel Plated Brass S32c 54−355 SPDT ON NONE ON Nickel Plated Brass S32c 54−356 SPDT ON OFF ON Nickel Plated Brass S32c 54−357 SPDT (ON) NONE ON Nickel Plated Brass S32c 54−358 SPDT (ON) OFF (ON) Nickel Plated Brass S32c 54−359 SPDT ON OFF (ON) Nickel Plated Brass S32c SPECIAL NOTE: ( ) = Momentary Function NTE Electronics, Inc. Voice (973) 748−5089 .551 (14.0) .250 (6.35) .031 (0.80) Specifications Current Rating: Functions ON−OFF and ON−ON: 15A 250VAC or 10A 24VDC Functions ON OFF ON: 15A 250VAC Other Functions: 15A 125VAC, 12A 250VAC or 5A 25VDC Insulation Resistance: 1000 Megohms (min.) at 500VDC Dielectric Strength: 2000V RMS (min.) between terminals Temperature Rating: −4 to +131 F (−20 to +55 C) Electrical Life: 10,000 cycles (min.) at full load Terminal Type: Refer to Diag No. in Table Mounting Hole: .480 (12.2) FAX (973) 748−6224 http://www.nteinc.com 5 Bat Handle Toggle Features .689 (17.5) S33 Waterproof Types Available on Page 18 a: Solder Lug/Quick Connect 15/32 32 NS Thread Keway .177 (4.5) .413 (10.5) .122 (3.1) Dia .846 (21.4) .250 (6.35) .433 (11.0) .031 (0.80) .267 (6.8) c: Screw (Assembled) .578 (14.65) 1.169 (29.7) A3 A2 A1 NTE Type No. Circuitry Current Rating 54−360 54−361# 54−362*# 54−363# 54−364# 54−365# 54−366 54−367 54−369## 54−370# 54−371*# 54−372# 54−373## 54−374## DPDT SP3T SP3T DPDT DPDT DPDT DPST DPST DPDT DPDT SP3T DPDT DPDT DPDT A C C C C C A A A B C C C C Action ON ON ON (ON) (ON) ON ON ON ON ON ON (ON) (ON) ON NONE ON ON NONE OFF OFF NONE NONE NONE OFF ON NONE OFF OFF ON ON ON ON (ON) (ON) OFF OFF ON ON ON ON (ON) (ON) Actuator Diag No. Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate S33a S33a S33a S33a S33a S33a S33a S33c S33c S33c S33c S33c S33c S33c SPECIAL NOTE: ( ) = Momentary Function * SP in DP case. # UL for 10 Amp ONLY ## UL for 12 Amp ONLY .250 (6.35) .846 (21.5) .430 (11.0) B6 B5 .031 (0.80) B4 Specifications Current Rating: A: 15A 250VAC or 10A 24VDC, 15A 12VDC B: 15A 250VAC, C: 15A 125VAC, 12A 250VAC or 5A 25VDC Insulation Resistance: 1000 Megohms (min.) at 500VDC Dielectric Strength: 2000V RMS (min.) between terminals Temperature Rating: −4 to +131 F (−20 to +55 C) Electrical Life: 10,000 cycles (min.) at full load Terminal Type: Refer to Diag No. in Table Mounting Hole: .480 (12.2) Bat Handle Toggle Features S5 Quick Make, Quick Break Contacts Suitable for High Amperage AC/DC Motor Control Screw Terminals .687 Keyway (17.44) .072 (1.82) x .038 (.965) DP 15/32−32 UNS−2A Thread .465 (11.81) .765 (19.43) 1.750 (44.45) .836 (21.23) 1.764 (44.8) Terminal Types c: Screw (Assembled) #6−32NC−2 Thread .270 (6.86) Specifications NTE Type No. 54−055 54−056 6 Circuitry DPST SPST Action ON ON NONE NONE OFF OFF Actuator Diag No. Brass/Nickel Plate Brass/Nickel Plate S5c S5c NTE Electronics, Inc. Current Rating: 16A 125VAC, 8A 250VAC, 1 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 to +150 F (−17.8 to +65.6 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Bat Handle Toggle S9 Keyway .687 .072 (1.82) x (17.44) .038 (.965) DP 15/32−32 UNS−2A Thread .465 (11.81) .895 (22.73) 1.000 (25.4) 2.093 (53.16) Terminal Types c: Screw (Assembled) NTE Type No. 54−057 Circuitry DPST Action ON NONE OFF Actuator Diag No. Brass/Nickel Plate S9 #6−32NC−2 Thread .270 (6.86) Specifications Current Rating: 20A 125VAC, 10A 250VAC, 1 1/2 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 F to +150 F (−17.8 C to +65.6 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Bat Handle Toggle S8 Keyway .072 (1.82) x .038 (.965) DP 1.308 (33.22) .687 (17.44) .465 (11.81) .778 (19.76) 15/32−32 NS−2 Thread 9/16 Hex Nut .490 (12.45) NTE Type No. Circuitry Action Actuator Diag No. 54−026 DPST ON NONE OFF Brass/Nickel Plate S8 54−027 DPDT ON NONE ON Brass/Nickel Plate S8 54−028 DPDT ON OFF ON Brass/Nickel Plate S8 .750 (19.05) Saddle Clamp & Screw Specifications Current Rating: 15A 125VAC, 10A 250VAC, 3/4 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32 F to +185 F (0 C to +85 C) Electrical Life: 50,000 cycles Mechanical Life: 100,000 cycles Terminal Type: “3−in−1” Combi−Terminal Mounting Hole: .500 (12.7) NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 7 Bat Handle Toggle Features 15/32−32 UNS−2A Thread S4 Slow Make, Slow Break Contacts Heavy Duty AC Rated Also Suitable for Low Voltage DC Applications Industry Standard .500” Dia Mounting Hole Various Terminal Selections .687 (17.44) Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .778 (19.76) .422 (10.72) 1.308 (33.22) a: Solder Lug .330 (8.38) .187 (4.74) Circuitry Current Rating 54−003 54−004 54−011 54−012 54−013 54−093 54−095 54−099 54−100 54−101 54−103 54−104 54−137* DPDT DPST DPST DPDT DPDT SPST SPDT DPDT DPDT DPDT SPST SPST SPST A A A A A B B B B C A A D Action ON ON ON ON ON ON ON ON ON ON (ON) ON ON NONE NONE NONE OFF OFF NONE OFF NONE OFF NONE NONE NONE NONE ON OFF OFF ON ON OFF ON ON ON (ON) OFF (OFF) OFF Actuator Diag No. Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate Brass/Nickel Plate S4b S4b S4c S4b S4c S4c S4c S4c S4c S4a S4c S4c S4a SPECIAL NOTE: ( ) = Momentary Function * SP in DP case. Bat Handle Toggle c: Screw (Assembled) #6−32NC−2 Thread .075 (1.91) Dia .125 (3.18) Dia NTE Type No. .750 (19.05) Terminal Types b: .250” Tab (Q.C.) .370 (9.39) .437 (11.08) .250 (6.35) .141 (3.58) .286 (7.26) Specifications Current Rating: A: 15A 125VAC, 10A 250VAC, 3/4 HP 125−250VAC B: 20A 125−277VAC, 1 1/2 HP 125VAC, 2 HP 250VAC C: 6A 125VAC, 3A 250VAC, 1/4HP 125−250VAC D: 20A 250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32 to +185 F (0 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Refer to Diag No. in Table Mounting Hole: .500 (12.7) S10 15/32−32 UNS−2A or M12 (.750) Thread Keyway .072 (1.82) x .038 (.965) DP .465 (11.81) .687 (17.44) Max 4 Pole Type .803 (20.4) .422 (10.72) 1.308 (33.22) 1.436 (36.47) 1.088 (27.64) Terminal Types c: Screw (Assembled) #6−32NC−2 Thread .370 (9.39) .141 (3.58) .286 (7.26) NTE Type No. Circuitry Action 54−014 3PST OFF 54−015 3PDT 54−016 3PDT 54−017 Actuator Diag No. NONE ON Brass/Nickel Plate S10c ON OFF ON Brass/Nickel Plate S10c ON NONE ON Brass/Nickel Plate S10c 4PDT ON OFF ON Brass/Nickel Plate S10c 54−018 4PST OFF NONE ON Brass/Nickel Plate S10c 54−019 4PDT ON NONE ON Brass/Nickel Plate S10c 8 NTE Electronics, Inc. Specifications Current Rating: 15A 125VAC, 10A 250VAC, 3/4 HP 125-250VAC, 1, 2 or 3 Phase Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: 0 to +150 F (−17.8 to +65.6 C) Electrical Life: 50,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Max. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Bat Handle Mini Toggle Features S24 SP, DP, 3P & 4P Types Epoxy Sealed Terminals Typical Applications Include: Switching Power Supplies, DC−DC Converters, Motors, etc. .118 (3.0) Dia .413 (10.5) 1/4 40 UNS Thread Keway .039 (1.0) .314 (8.0) .472 (12.0) .145 (3.7) Epoxy .275 (7.0) .519 (13.2) .070 (1.8) .031 (0.8) .019 (0.5) Double Pole Epoxy Wiring Diagram (54−306 Only) 6 5 4 III 3 6 2 1 6 5 4 II 3 6 5 2 4 1 .472 (12.0) 6 5 4 Circuitry 54−301 54−302 54−303 54−304 54−305 54−306* 54−307 54−308 54−309 54−310 54−312 54−313 54−314 54−315 54−316 54−323 54−324 54−325 54−326 54−327 SPDT SPDT SPDT SPDT SPDT SP3T DPDT DPDT DPDT DPDT 4PDT 4PDT 4PDT 4PDT 4PDT 3PDT 3PDT 3PDT 3PDT 3PDT ON ON ON ON (ON) ON ON ON ON ON ON ON (ON) ON ON ON ON (ON) ON ON NONE NONE OFF OFF OFF ON NONE OFF NONE OFF NONE OFF OFF OFF NONE NONE OFF OFF OFF NONE 6 5 2 5 4 1 4 (ON) ON ON (ON) (ON) ON ON ON (ON) (ON) ON ON (ON) (ON) (ON) ON ON (ON) (ON) (ON) .070 (1.8) .187 (4.75) 3 Action Epoxy .649 (16.5) .070 (1.8) I .187 (4.75) 4 Pole Epoxy .834 (21.2) Bottom View Bottom View Bottom View Equivalent to single pole 3 throw switch. Dotted line between terminals 2 & 6 indicate external jumpers to be added by customer. NTE Type No. 3 Pole .070 (1.8) .187 (4.75) Actuator Diag No. Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 S24 Specifications Current Rating: 6A 125VAC, 3A 250VAC or 4A 30VDC Insulation Resistance: 1000 Megohms (min.) at 500VDC Dielectric Strength: 1000V RMS (min.) between terminals Temperature Rating: −40 to +185 F (−40 to +85 C) Electrical Life: 50,000 cycles (min.) Electrical Life: 40,000 cycles (min.) 3 Pole Only Electrical Life: 30,000 cycles (min.) 4 Pole Only Terminal Type: Refer to Diag No. in Table Mounting Hole: .255 (6.5) SPECIAL NOTE: ( ) = Momentary Function * SP in DP case. NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 9 Bat Handle Mini Toggle Features SP, DP, 3P & 4P Types PC Terminal Types Available (PC suffix) Epoxy Sealed Terminals Typical Applications Include: Switching Power Supplies, DC−DC Converters, Motors, etc. S119 .115 (2.9) Dia 1/4 40 UNS Thread .410 (10.4) Keway .350 (8.9) .350 (8.9) .145 (3.7) Epoxy .270 (6.86) .500 (12.7) .080 (2.03) .030 (0.76) Double Pole 3 Pole Epoxy NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NTE Type No. Circuitry 54−301E 54−301PC 54−302E 54−302PC 54−303E 54−303PC 54−304E 54−304PC 54−305E 54−305PC 54−307E 54−307PC 54−308E 54−308PC 54−309E 54−309PC 54−310E 54−310PC 54−311E 54−311PC 54−323E 54−323PC 54−324E 54−324PC 54−327PC 54−312E 54−312PC 54−313E 54−313PC 54−316PC SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT 3PDT 3PDT 3PDT 3PDT 3PDT 4PDT 4PDT 4PDT 4PDT 4PDT Action ON ON ON ON ON ON ON ON (ON) (ON) ON ON ON ON ON ON ON ON (ON) (ON) ON ON ON ON ON ON ON ON ON ON NONE NONE NONE NONE OFF OFF OFF OFF OFF OFF NONE NONE OFF OFF NONE NONE OFF OFF OFF OFF NONE NONE OFF OFF NONE NONE NONE OFF OFF NONE Actuator (ON) (ON) ON ON ON ON (ON) (ON) (ON) (ON) ON ON ON ON (ON) (ON) (ON) (ON) (ON) (ON) ON ON ON ON (ON) ON ON ON ON (ON) Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Diag No. S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119 S119a S119a S119 S119a S119 S119a S119a .450 (11.43) Epoxy .650 (16.5) .080 (2.03) .080 (2.03) .185 (4.7) 4 Pole .185 (4.7) a. PC Mount Epoxy .850 (21.59) .189 (4.8) .250 (6.35) .080 (2.03) .185 (4.7) .050 (1.27) Specifications Current Rating: 5A 120VAC or 28VDC, 2A 250VAC Insulation Resistance: 1000 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: −22 to +185 F (−30 to +85 C) Electrical Life: 50,000 cycles (min.) at full load Terminal Type: Refer to Diag No. in Table Mounting Hole: .250 (6.35) SPECIAL NOTE: ( ) = Momentary Function 10 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Bat Handle Subminiature Toggle Features S86 Single and Double Pole Types Epoxy Sealed Terminals .240 (6.1)Dia 10−48 UNS .020 (0.51) .370 (9.4) .200 (5.08) .200 (5.08) .100 (2.54) .220 (5.59) .160 (4.06) .340 (8.64) .060 (1.52) .110 (2.79) Double Pole .360 (9.14) .160 (4.06) .200 (5.08) .060 (1.52) NTE Type No. Circuitry Action Actuator Diag No. SPST ON NONE OFF Chrome Plated Brass S86 54−141 SPDT ON NONE ON Chrome Plated Brass S86 54−142 DPDT ON NONE ON Chrome Plated Brass S86 54−140 SPECIAL NOTE: ( ) = Momentary Function Specifications Current Rating: 3A 120VAC or 28VDC, 1.5A 250VAC Insulation Resistance: 1000 Megohms (min.) Dielectric Strength: 1500V RMS (min.) Temperature Rating: −22 to +185 F (−30 to +85 C) Electrical Life: 30,000 cycles (min.) Terminal Type: Solder Lug Mounting Hole: .192 (4.9) Bat Handle Subminiature Toggle Features S95 Epoxy Sealed Terminals Keyway This Side .030 (0.76) 1/4−40NS .410 (10.41) .185 (4.7) .350 (8.89) .500 (12.7) .270 (6.86) .350 (8.89) .505 (12.83) NTE Type No. 54−395 Circuitry SPST Action ON NONE OFF Actuator Diag No. Chrome Plated Brass S95 Specifications Current Rating: 5A 120VAC or 28VDC, 2A 250VAC Insulation Resistance: 1000 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: −22 to +266 F (−30 to +130 C) Electrical Life: 50,000 cycles (min.) Terminal Type: Solder Lug Mounting Hole: .250 (6.35) NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 11 Flatted Handle Mini Toggle Features SP, DP, 3P & 4P Types Epoxy Sealed Terminals Typical Applications Include: Switching Power Supplies, DC−DC Converters, Motors, etc. S28 .196 (5.0) Dia .413 (10.5) .100 (2.54) 1/4 40 UNS Thread Keway .039 (1.0) .314 (8.0) .472 (12.0) .145 (3.7) Epoxy .275 (7.0) .519 (13.2) .070 (1.8) .031 (0.8) .019 (0.5) 3 Pole Double Pole Epoxy Epoxy NTE Type No. Actuator Diag No. 54−328 SPDT ON NONE ON Chrome Plated Brass S28a 54−329 SPDT ON OFF ON Chrome Plated Brass S28a 54−330 SPDT (ON) OFF (ON) Chrome Plated Brass S28a 54−331 SPDT ON OFF (ON) Chrome Plated Brass S28a 54−332 SPDT ON NONE (ON) Chrome Plated Brass S28a 54−333 DPDT ON NONE ON Chrome Plated Brass S28 54−334 DPDT ON OFF ON Chrome Plated Brass S28a 54−335 DPDT (ON) OFF (ON) Chrome Plated Brass S28 54−336 DPDT ON OFF (ON) Chrome Plated Brass S28a 54−337 DPDT ON NONE (ON) Chrome Plated Brass S28a 54−339 3PDT ON OFF ON Chrome Plated Brass S28 54−340 3PDT (ON) OFF (ON) Chrome Plated Brass S28 54−341 3PDT ON OFF (ON) Chrome Plated Brass S28 54−342 3PDT ON NONE (ON) Chrome Plated Brass S28 54−344 4PDT ON OFF ON Chrome Plated Brass S28 54−345 4PDT (ON) OFF (ON) Chrome Plated Brass S28 54−346 4PDT ON OFF (ON) Chrome Plated Brass S28 54−347 4PDT ON NONE (ON) Chrome Plated Brass S28 Circuitry Action .649 (16.5) .472 (12.0) .070 (1.8) .070 (1.8) .187 (4.75) .187 (4.75) 4 Pole Epoxy .834 (21.2) .070 (1.8) .187 (4.75) S28a .196 (5.0) Dia .472 (12.0) Keway M6*0.75 .295 (7.5) .362 (9.2) .244 (6.2) SPECIAL NOTE: ( ) = Momentary Function .275 (7.0) .512 (13.0) Double Pole .472 (12.0) .187 (4.75) Specifications Current Rating: 6A 125VAC, 3A 250VAC or 4A 30VDC Insulation Resistance: 1000 Megohms (min.) at 500VDC Dielectric Strength: 1000V RMS (min.) between terminals Temperature Rating: −40 to +185 F (−40 to +85 C) Electrical Life: 50,000 cycles (min.) Electrical Life: 40,000 cycles (min.) 3 Pole Only Electrical Life: 30,000 cycles (min.) 4 Pole Only Terminal Type: Solder Lug Mounting Hole: .255 (6.5) 12 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Nylon Paddle Toggle Features S6 Nylon Insulated Toggle Self−Cleaning Wiping Contacts Industry Standard .500” Dia Mounting Hole Support Double Insulated Requirements .687 (17.44) Keyway .075 (1.82) x .038 (.965) DP .280 (7.11) .687 (17.44) .375 (9.52) .588 (14.93) 1.000 (25.4) Terminal Types b: .250” Tab (Q.C.) .068 (1.75) Dia .250 (6.35) Specifications NTE Type No. Circuitry Action Actuator Diag No. 54−020 SPST OFF NONE ON Black Nylon S6b 54−021 SPDT ON NONE ON Black Nylon S6b 54−022 SPDT ON OFF ON Black Nylon S6b Current Rating: 20A 125VAC, 10A 250VAC, 1 1/2 HP 125−250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32 to +185 F (0 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: .250” Tab Q.C. Mounting Hole: .500 (12.7) Nylon Paddle Toggle Features S7 Slow Make, Slow Break Contacts Heavy Duty AC Rated Also Suitable for Low Voltage DC Applications Industry Standard .500” Dia Mounting Hole .687 (17.44) .379 (9.63) .865 (21.97) Keyway .072 (1.82) x .038 (.965) DP 15/32−32 UNS−2A Thread 422 (10.72) 1.375 (34.92) a: Solder Lug .750 (19.05) Terminal Types b: .250” Tab (Q.C.) .330 (8.38) .187 (4.74) NTE Type No. Circuitry Action Actuator Diag No. 54−110 SPST ON NONE OFF Black Polycarbonate S7c 54−111 SPDT ON NONE ON Black Polycarbonate S7c 54−119 SPDT ON OFF ON Black Polycarbonate S7b 54−107 DPST ON NONE OFF Black Polycarbonate S7b 54−112 DPST ON NONE OFF Black Polycarbonate S7c 54−084 DPDT ON NONE ON Black Polycarbonate S7a 54−085 DPDT ON OFF ON Black Polycarbonate S7a 54−108 DPDT ON NONE ON Black Polycarbonate S7b 54−109 DPDT ON OFF ON Black Polycarbonate S7b 54−120 DPDT ON OFF ON Black Polycarbonate S7c NTE Electronics, Inc. Voice (973) 748−5089 c: Screw (Assembled) #6−32NC−2 Thread .075 (1.91) Dia .125 (3.18) Dia .437 (11.08) .250 (6.35) .370 (9.39) .141 (3.58) .286 (7.26) Specifications Current Rating: 54−084 & 54−085: 6A 125VAC, 3A 250VAC, 1/4 HP 125-250VAC All Other Devices: 20A 125-277VAC, 1 1/2 HP 125VAC, 2 HP 250VAC Insulation Resistance: 100 Megohms (min.) Dielectric Strength: 1000V RMS (min.) Temperature Rating: +32 to +185 F (0 to +85 C) Electrical Life: 50,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Refer to Diag No. in Table Mounting Hole: .500 (12.7) FAX (973) 748−6224 http://www.nteinc.com 13 Nylon Paddle Toggle Features S34 Quick Connect Terminals Insulated Actuator Single Pole Double Pole .531 (13.5) 15/32 32 NS Thread .452 (11.5) Keyway B .283 (7.2) A .330 (8.4) .228 (5.8) Device Type Single Pole Double Pole NTE Type No. Circuitry Action Actuator Diag No. 54−317 SPDT ON NONE ON Black Polyamide 6−6 S34 54−318 SPDT ON OFF ON Black Polyamide 6−6 S34 54−319 SPST ON NONE OFF Black Polyamide 6−6 S34 54−320 DPST ON NONE OFF Black Polyamide 6−6 S34 54−321 DPDT ON NONE ON Black Polyamide 6−6 S34 54−322 DPDT ON OFF ON Black Polyamide 6−6 S34 .315 (8.0) .110 (2.8) .472 (12.0) A .748 (19.0) .826 (21.0) .649 (16.5) B .551 (14.0) .590 (15.0) Specifications Current Rating: 6A 125VAC, 4A 250VAC Insulation Resistance: 1000 Megohms (min.) at 500VDC Dielectric Strength: 2000V RMS (min.) between terminals Temperature Rating: −4 to +131 F (−20 to +55 C) Electrical Life: 10,000 cycles (min.) Terminal Type: Solder Lug/Quick Connect Mounting Hole: .492 (12.5) Paddle Handle Toggle Features S26 50 Amps at 12VDC Suitable for Low Voltage, High Amperage Applications Screw Terminals 1.358 (34.5) .354 (9.0) 15/32−32 NS−2A .394 (10.0) 2.921 (74.2) .800 (20.3) .587 (14.9) .299 (7.6) .748 (19.0) .055 (1.4) No. 6−32 UNC Specifications Actuator NTE Type No. Circuitry Action 54−560 SPST ON NONE OFF 54−561 SPST ON NONE OFF 54−562 SPST ON NONE OFF 14 Material Color Diag No. ABS Black S26 Red S26 Chrome S26 ABS w/Chrome Plating NTE Electronics, Inc. Current Rating: 50A 12VDC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1500V RMS (min.) Temperature Rating: −4 to +180 F (−20 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Paddle Handle Toggle Features S27 50 Amps at 12VDC Interchangable Boots (Red, Black, Yellow and Blue) Included Screw Terminals 1.358 (34.5) .433 (11.0) 15/32−32 NS−2A 3.252 (82.6) Half−Toggle Boot .394 (10.0) .630 (16.0) .800 (20.3) .748 (19.0) Dia .587 (14.9) .299 (7.6) .748 (19.0) No. 6−32 UNC .055 (1.4) NTE Type No. 54−563 Circuitry SPST Action ON NONE OFF Actuator Diag No. Chrome Plated S27 Specifications Current Rating: 50A 12VDC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1500V RMS (min.) Temperature Rating: −4 to +180 F (−20 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) Long Bat Handle Toggle Features S29 50 Amps at 12VDC 1 5/8” Long Bat Handle Screw Terminals 1.358 (34.5) 2.016 (51.2) .236 (6.0) 1.599 (40.6) .311 (7.9) 15/32−32 NS−2A .394 (10.0) .800 (20.3) .547 (13.9) .299 (7.6) .748 (19.0) .055 (1.4) NTE Type No. 54−564 Circuitry SPST Action ON NTE Electronics, Inc. NONE OFF Actuator Diag No. Chrome Plated S29 Voice (973) 748−5089 No. 6−32 UNC Specifications Current Rating: 50A 12VDC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1500V RMS (min.) Temperature Rating: −4 to +180 F (−20 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) FAX (973) 748−6224 http://www.nteinc.com 15 Paddle Toggle Features S30 50 Amps at 12VDC Screw Terminals 1.358 (34.5) .354 (9.0) 15/32−32 NS−2A 2.921 (74.2) .394 (10.0) .800 (20.3) .587 (14.9) .299 (7.6) .748 (19.0) .055 (1.4) NTE Type No. 54−565 Circuitry SPDT Action ON OFF ON Actuator Diag No. Chrome Plated S29 No. 6−32 UNC Specifications Current Rating: 50A 12VDC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1500V RMS (min.) Temperature Rating: −4 to +180 F (−20 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: Screw Type Mounting Hole: .500 (12.7) On/Off Bat Handle and Duckbill Toggle Features S31 Illuminated Types Available on Page 19 Bat Handle (54−566) and Duckbill (54−571) Types .250” Quick−Connect Terminals a. Bat Handle b. Duckbill .425 (10.8) .425 (10.8) 1.087 (27.3) 15/32−32 NS−2A .669 (17.0) .441 (11.2) .551 (14.0) .402 (10.2) .300 (6.4) .965 (24.5) .551 (14.0) .250 (6.35) Specifications NTE Type No. Circuitry Action Actuator 54−566 SPST ON NONE OFF 54−571 SPST ON NONE OFF 16 Black Brushed Aluminum NTE Electronics, Inc. Diag No. S31a S31b Current Rating: 20A 12VDC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1000V RMS (min.) Temperature Rating: −4 to +180 F (−20 to +85 C) Electrical Life: 25,000 cycles Mechanical Life: 100,000 cycles Terminal Type: .250” Tab Q.C. Mounting Hole: .500 (12.7) Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com Paddle Toggle S69 .378 (9.6) 1.122 (28.5) .984 (25.0) 2.264 (57.5) .437 (11.1) NTE Type No. 54−381 Circuitry DPDT Action ON OFF ON Actuator Diag No. Black ABS Resin S69 .630 (16.0) .236 (6.0) .945 (24.0) .748 (19.0) Specifications Current Rating: 6A 250VAC Insulation Resistance: 100 Megohms (min.) at 500VDC Dielectric Strength: 1500V RMS (min.) Temperature Rating: +14 to +131 F (−10 to +55 C) Electrical Life: 6,000 cycles Mechanical Life: 30,000 cycles Terminal Type: Solder Lug Mounting Hole: .472 (12.0) NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 17