54−900 Hardware, Indicator Plate Features: Nickel−Plated Steel Fits 15/32” (.465 (11.81)) Bushing 54−901 Hardware, Indicator Plate Features: ON Nickel−Plated Steel Fits 15/32” (.465 (11.81)) Bushing OFF 54−902 Hardware, Indicator Plate Features: Nickel−Plated Steel Fits 15/32” (.465 (11.81)) Bushing ON OFF 54−903 Hardware, Indicator Plate Features: ON Grade 430 Stainless Steel Fits 15/32” (.465 (11.81)) Bushing OFF NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 83 54−904 Hardware, Brass Facenut Straight Knurl 64 Knurls Ref. Features: Break Edges (Both Sides) Bright Nickel Plating 3/8−27NS−2B Thread 3/8−27NS−2B .500 (12.7) Dia .060 (1.52) 54−905 Hardware, Rubber Boot .945 (24.0) Features: For Bat Handle Toggle Switch 15/32−32 UNS−2A Thread .331 (8.4) Dia .657 (16.7) .118 (3.0) .016 (0.4) 54−906 Hardware, Rubber Boot/Knob Features: .291 (7.4) For Mini Toggle Switch 1/4−40 Thread Contains “O”−Ring Seal .236 (6.0) .472 (12.0) Dia 54−910 Hardware, Mounting Panel Features: End Section For Automotive/Marine Types Black Color 2.300 (58.42) 1.970 (50.03) 1.187 (30.14) 84 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 54−911 Hardware, Mounting Panel Features: Middle Section For Automotive/Marine Types Black Color 2.300 (58.42) 1.970 (50.03) 1.034 (26.26) 54−912 Hardware, Connector Housing 1.250 (31.75) Features: For Automotive/Marine Types .770 (19.56) 1.170 (29.72) .950 (24.13) 54−913 Hardware, Actuator Removal Tool Features: 3.990 (101.35) For Automotive/Marine Types For Flush Bracket TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN .900 (22.86) TOP 54−914 Hardware, Connector Features: .500 (12.7) .250” Tab Black Color .920 (23.37) 1.710(43.43) NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com .790 (20.07) 85 54−915 Hardware, Removable Hole Plug 1.970 (50.04) Features: 1.020 (25.91) For Automotive/Marine Types With Non−Serrated Wings .300 (7.62) 1.325 (33.66) .855 (21.72) 54−920, 54−921, 54−922, 54−923 Hardware, Safety Cover Features: For Toggle Switch w/12mm (15/32”) Mounting Hole Accepts Standard 17.5mm (11/16”) Switch Handles Available in 4 Colors: 54−920 (Red) 54−921 (Red Metallic) 54−922 (Blue Metallic) 54−923 (Silver Metallic) 1.695 (43.06) 1.090 (27.65) .370 (9.5) .440 (11.1) .480 (12.2) Dia .670 (17.0) .470 (12.0) .590 (15.0) 1.600 (40.5) 86 NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com