Features • • • • Sealed Construction for Automatic Soldering and Cleaning Rated for D 150 Pilot Duty Standard Pin Spacing (0.1”) PC Board Mount RLY34 Series Subminiature, PC Mount, 5 Amp, SPST−NO Relay. D65 .690 (17.5) .020 (0.5) .490 (12.5) 1 13 5 7 .140 (3.5) .100 (2.54) .300 (7.62) SPST−NO, 1 Form “A” (Bottom View) 1 5 .200 (5.08) .200 (5.08) 7 .260 (6.5) Electrical Specifications Contact 13 Rating: 5 Amp @ 250 VAC, 30 VDC Material: Ag Alloy Resistance: 100mΩ Max Coil Coil Voltages: See Chart Pick−up Voltages: 70% max of rated voltage Drop−out Voltages: 10% min of rated voltage Resistance: See Chart DC OPERATED Approx. Nom. Power Max. Contact Cur. @ 30VDC 250VAC Diag No. Nom. Volt. Contact Arr. Coil Res. Ohms (Typ) RLY3405 5VDC SPST−NO 125 200mW 5A D65 RLY3412 12VDC SPST−NO 720 200mW 5A D65 RLY3424 24VDC SPST−NO 2880 200mW 5A D65 NTE Type No. Operational Characteristics Timing Value: . . . Operate Time: 10 mS max Release Time: 10 mS max Insulation Characteristics Dielectric Strength Between Contact and Coil: 3000 VAC/1 minute Between Contacts (Same Polarity): 750 VAC/ 1 minute Insulation Resistance: 1000MΩ Min. @ 500 VDC Surge Withstand Voltage Between Coil and Contacts: 6000V, 1.2 x 50µs Environmental Characteristics Operating: −25°C to +70°C Life Mechanical: 18,000 operations/hour Electrical: 1,800 operations/hour (under rated load) Weight Std: 0.10 oz (3 grams) approx. NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com 81