PE88D Single Frequency PECL Clock Oscillator January 2011 • • • • • 106.25 or 212.50 MHz 5 x 7 mm LCC Ceramic Package Enable/Disable Function on pad 1 Vcc of 3.3 volts Low Jitter et e • Pletronics’ PE88D Series is a quartz crystal controlled precision square wave generator with a PECL output. • The package is designed for high density surface mount designs. • Low cost mass produced oscillator. • Tape and Reel or cut tape packaging is available. Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. bs ol Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.16 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +7.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics O The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt, depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2011, Pletronics Inc. PE88D Single Frequency PECL Clock Oscillator January 2011 Part Number: Part Marking: PE88 45 D E V - 106.25M -XX PLE PE88 106.25 M C YMDXX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel et e or PLE PE88 212.50 M C YMDXX Frequency in MHz 106.25 MHz or 212.50 MHz Supply Voltage VCC V = 3.3V _ + 10% or Optional Enhanced OTR Blank = Temp. range -10 to +70oC C = Temp. range -20 to +70oC E = Temp. range -40 to +85oC PE8XYWWXX 106.25 M C PLE XXX or Series Model bs ol Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm PE8XYWWXX 212.50 M C PLE XXX Series Model Marking Legend: PLE = Pletronics YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code 0 1 2 3 4 Code A B C D E F G H J K L M O Year 2010 2011 2012 2013 2014 Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Code Day Code Day 1 1 H 17 2 2 J 18 www.pletronics.com 3 3 K 19 4 4 L 20 5 5 M 21 6 6 N 22 425-776-1880 7 7 P 23 8 8 R 24 9 9 T 25 A 10 U 26 B 11 V 27 C 12 W 28 D 13 X 29 E 14 Y 30 F 15 Z 31 2 G 16 PE88D Single Frequency PECL Clock Oscillator January 2011 Electrical Specification for 3.30V + _10% over the specified temperature range Min Max Unit 106.25 212.50 MHz Frequency Accuracy “45" -50 +50 ppm “44" -25 +25 “20" -20 Frequency Range Output Waveform Output High Level Output Low Level Condition For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures et e Item +20 PECL /ECL 2.275 - volts Referenced to Ground, VCC = 3.30 V 0.975 - volts Referenced to termination voltage -1.025 - volts Referenced to Vcc - 1.680 volts Referenced to Ground, VCC = 3.30 V 0.380 volts Referenced to termination voltage -1.620 volts Referenced to Vcc - bs ol Output Symmetry 53 % - 0.9 pS RMS 12 KHz to 20 MHz from the output frequency - 2.0 pS RMS 10 Hz to 1 MHz from the output frequency 250 600 pS Vth is 20% and 80% of waveform - 90 mA Includes current of properly terminated device 60 - Kohm to VCC V disable - 0.8 volts Referenced to pad 3 V enable 2.00 - volts Output leakage -50 +50 uA Pad 1 low, device disabled, Outputs within PECL output levels Enable time - 10 nS Time for output to reach a logic state Disable time - 10 nS Time for output to reach a high Z state Start up time - 5 mS Measure from the time VCC = 3.0V -10 +70 o Standard Temperature Range - 40 +85 o Extended Temperature Range “C” Option - 40 +85 o Extended Temperature Range “E” Option -55 +125 o Jitter Output TRISE and TFALL VCC Supply Current (ICC) O Enable/Disable Internal Pull-up Operating Temperature Range Storage Temperature Range C C C at 50% point of VCC (See load circuit) 47 C Specifications with Pad 1 E/D open circuit www.pletronics.com 425-776-1880 3 PE88D Single Frequency PECL Clock Oscillator January 2011 Typical Phase-Noise Response 0 -20 dBc/Hz -40 -60 -80 -100 et e -120 -140 -160 10 1,000 100,000 10,000,000 Frequency (Hz) bs ol Load Circuit Test Waveform O Symmetry Vhigh Out 80% 50% 20% Vlow Out* Trise Tfall Showing Out Measurement only www.pletronics.com 425-776-1880 4 PE88D Single Frequency PECL Clock Oscillator January 2011 Reliability: Environmental Compliance Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating et e Parameter Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 bs ol Model Charged Device Model 1000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial O Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com 425-776-1880 5 PE88D Single Frequency PECL Clock Oscillator January 2011 Mechanical: Inches 0.276 + _0.006 7.00 + _0.15 B 0.197 + _0.006 5.00 + _0.15 C 0.067 max 1.70 max D1 0.038 0.96 1 E 0.200 5.08 F1 0.004 0.10 G1 0.050 1.27 H1 0.055 1.40 I1 0.024 0.60 J1 0.004R 0.10R K1 0.008R 0.20R et e A 1 Typical dimensions Not to Scale bs ol Contacts: Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm mm Function Note 1 Output Enable/Disable When this pad is not connected the oscillator shall operate. When this pad is <0.30 volts, the output will be inhibited (high impedance state.) Recommend connecting this pad to VCC if the oscillator is to be always on. 2 No connect No internal connection 3 Ground (GND) 4 Output 5 Output* 6 Supply Voltage (VCC) Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the positive Supply Voltage. Recommend connecting appropriate power supply bypass capacitors as close as possible. O Pad Layout and application information For Optimum Jitter Performance, Pletronics recommends: • place terminations at the end of the output lines. • a ground plane under the device • if capacitive coupling is used on the output, care in choosing component values must be used to achieve good signal quality. Remember ECL/PECL outputs are driven by an emitter follower. • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 6 PE88D Single Frequency PECL Clock Oscillator January 2011 260°C Maximum 10 Seconds Maximum 250 215°C±10°C 200 175°C±10°C et e Temperature (°C) Reflow Cycle (typical for lead free processing) 150 100 Approximately 50 Seconds 120 to 160 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 3 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250 Constant Dimensions Table 1 D0 D1 Min E1 P0 P2 S1 Min T Max 0.6 0.6 T1 Max bs ol Tape Size 8mm 1.0 12mm 1.5 16mm +0.1 -0.0 24mm 2.0 +0.05 _ 1.5 1.75 4.0 1.5 _ +0.1 _0.1 + 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 _ +0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS O A www.pletronics.com B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 16.4 +2.0 -0.0 16.0 C mm D mm 13.0 +0.5 / -0.2 16.4 +2.0 -0.0 16.4 +2.0 -0.0 Reel dimensions may vary from the above 425-776-1880 7 PE88D Single Frequency PECL Clock Oscillator January 2011 IMPORTANT NOTICE et e Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. bs ol PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. O Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: [email protected] URL: www.pletronics.com Copyright © 2006, 2007, 2010, 2011 Pletronics Inc. www.pletronics.com 425-776-1880 8