SM7S Series Low Frequency Crystal October 2013 • The Pletronics’ SM7S Series is a m iniature surface m ount crystal. • The package is ideal for autom ated surface m ount assem bly and reflow practices. • Tape and Reel packaging • 32.768 KHz only • 1.2 x 2.0 m m 2 pad Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadm ium , Hexavalent Chrom ium , Lead, Mercury, PBB’s, PBDE’s W eight of the Device: 0.014 gram s Moisture Sensitivity Level: 1 As defined in J-STD-020D.1 Second Level Interconnect code: e4 Part Number: SM7S -9 - 32.768K -20 -XX Internal code or blank blank = ±30ppm at 25 oC 20 = ±20ppm at 25 oC 10 = ±10ppm at 25 oC Nom inal Frequency in KHz Load Capacitance Blank = 12.5pF 9 = 9pF (other values are special order) M odel Num ber Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A P roduct inform ation is current as of publication date. T he product conform s to specifications per the term s of the P letronics standard warranty. Production processsing does not necessarily include testing of all param eters. Copyright © 2006, 2007, 2008, 2009, 2010 Pletronics Inc. SM7S Series Low Frequency Crystal October 2013 Electrical Specification: Item Min Frequency Calibration Frequency Tolerance Max 32.768 Unit Condition kHz +30 +20 +10 ppm Equivalent Series Resistance -- 80K Ohms Drive Level -- 0.5 uW Turn Over Temperature 20 30 Temperature Coefficient -0.034 + _ 0.006 ppm/oC2 typical Aging (for first year) -3 +3 ppm/Yr at 25oC _ + 3oC 500M -- Ohms at 100V DC Operating Temperature Range -40 +85 o C Storage Temperature Range -55 +125 o C Insulation Resistance Shunt capacitance www.pletronics.com o C Co 425-776-1880 standard “20" “10" at 25oC _ + 3oC -30 -20 -10 Nominal is 25oC 1.2 pF Typical 2 SM7S Series Low Frequency Crystal October 2013 Mechanical: Inches A 0.047 _ + 0.004 1.2 + _ 0.1 B 0.079 _ + 0.004 2.0 + _ 0.1 C 0.024 max 0.60 max D1 0.197 max 0.50 max E1 0.039 1.0 1 Contacts : Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm mm Typical dimensions Not to Scale Package Labeling Label is 1" x 2.6" (25.4m m x 66.7m m ) Font is Courier New Bar code is 39-Full ASCII Label is 1" x 2.6" (25.4m m x 66.7m m ) Font is Arial Part Marking: • Marking consists of a m anufacturing date code • Orientation of m arking m ay be m ixed on the tape • Traceability of part’s specification is lost once rem oved from reel Layout and application information • Trace lengths to the crystal should be kept as short as possible. • The crystal connections are sensitive to noise. • The signal leads to the SM7S, in m ost oscillator applications, are exceptionally high im pedance. Rem em ber to protect these leads from m oisture and contam ination as leakage paths can inhibit proper oscillator function. www.pletronics.com 425-776-1880 3 SM7S Series Low Frequency Crystal October 2013 Reflow Cycle (typical for lead free processing) The part m ay be reflowed 2 tim es without degradation. Tape and Reel: available for quantities of 3000 per reel Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 12mm 1.5 16mm +0.1 -0.0 24mm P2 S1 Min T Max 0.6 0.25 T1 Max 2.0 +0.05 _ 1.5 1.75 4.0 1.5 _ +0.1 _0.1 + 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 12 mm 12.1 14.25 5.5 _ +0.1 4.0 _ +0.1 1.2 12.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 12.4 +2.0 -0.0 12.0 C mm D mm 13.0 +0.5 / -0.2 12.4 +2.0 -0.0 12.4 +2.0 -0.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 4 SM7S Series Low Frequency Crystal October 2013 IM PORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to m ake corrections, im provem ents, m odifications and other changes to this product at anytim e. PLE reserves the right to discontinue any product or service without notice. Custom ers are responsible for obtaining the latest relevant inform ation before placing orders and should verify that such inform ation is current and com plete. All products are sold subject to PLE’s term s and conditions of sale supplied at the tim e of order acknowledgm ent. PLE warrants perform ance of this product to the specifications applicable at the tim e of sale in accordance with PLE’s lim ited warranty. Testing and other quality control techniques are used to the extent PLE deem s necessary to support this warranty. Except where m andated by specific contractual docum ents, testing of all param eters of each product is not necessarily perform ed. PLE assum es no liability for application assistance or custom er product design. Custom ers are responsible for their products and applications using PLE com ponents. To m inim ize the risks associated with the custom er products and applications, custom ers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or system s or other critical applications that m ay involve potential risks of death, personal injury or severe property or environm ental dam age. Inclusion of PLE products in such applications is understood to be fully at the risk of the custom er. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or im plied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any com bination, m achine or process which PLE product or services are used. Inform ation published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsem ent thereof. Use of such inform ation m ay require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of inform ation in PLE data sheets or web site is perm issible only if the reproduction is without alteration and is accom panied by associated warranties, conditions, lim itations and notices. Reproduction of this inform ation with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered docum ents. Resale of PLE products or services with statem ents different from or beyond the param eters stated by PLE for that product or service voids all express and im plied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statem ents. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 19013 36 th Ave. W est Fax: 425-776-2760 Lynnwood, W A 98036-5761 USA E-m ail: ple-sales@ pletronics.com URL: www.pletronics.com Copyright © 2006, 2007, 2008, 2009, 2010 Pletronics Inc. www.pletronics.com 425-776-1880 5