Pl tronics,. Inc. 19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA Manufacturer of High Quality Frequency Control Products VC1 VCXO Series Full Size or Half Size Metal Thru-Hole Voltage Controlled Xtal Oscillator 2.00 MHz – 160.00 MHz CMOS/ TTL Compatible Standard Specifications Model Frequency Range Overall Frequency Stability Operating Temperature Range (OTR) Supply Voltage (Vcc) Output Load Control Voltage Range (CVR) Pullablity over CVR Linearity VC13 & VC15 VC14 & VC16 2.00 to 20.00 MHz 2.00 to 20.00 MHz 20.001 to 160.00 MHz ± 25, 50, 100 PPM ± 15 PPM only ± 15, 25, 50, 100 PPM over OTR 0 to +70°C is standard, but can be extended to - 40 to +85°C for certain frequencies 5.0 volts and 3.3 volts available Standard load is 15pF maximum, see Test Circuit 7 (consult factory for heavier loads) 0.5 to 4.5 volts for 5.0 volt Supply; 0.0 to 3.3 volts for 3.3 volt Supply ± 25, 50, 100, 150, 200 PPM. Consult factory for ± 300 PPM. ± 10% (Consult factory for ± 5%) Frequency Range (MHz) 2.000 20.001 30.001 50.001 60.001 – 20.000 – 30.000 – 50.000 – 60.000 – 160.000 Supply Current Icc (mA) Typical Maximum Rise and Fall Time Tr & Tf (nS) Typical Maximum 10 15 3.5 20 25 3.0 25 30 3.0 30 35 2.5 TBD TBD TBD Part Numbering Guide 5.0 4.5 4.0 3.5 TBD Portions of the part number that appear after the frequency may not be marked on part (C of C provided) 3 VC14H 100 A Z - 60.0M - XXX (Internal Code or blank) Packaging Tube or on Pads Supply Voltage Blank= 5.0 volts ±5% Model 3= 3.3 volts ±5% VC13H = Full Size, 5.08mm VC14H = Full Size, 8.0mm VC15H = Half Size, 6.0mm VC16H = Half Size, 7.5mm Frequency Stability (N/a for VC13, 15) 15: ± 15 PPM 25: ± 25 PPM N/a for 2.0 to 20.0 MHz (VC14, 16) 50: ± 50 PPM Use VC13, 15 for 2.0 to 20.0 MHz 100: ± 100 PPM Frequency in MHz Frequency Deviation (Pullability) over CVR T: ± 25 PPM X: ± 150 PPM V: ± 50 PPM Y: ± 200 PPM W: ± 100 PPM Z: ± 300 PPM Operating Temperature Range A: 0 to +50°C D: -20 to +75°C B: 0 to +70°C E: -30 to +75°C C: -10 to +70°C F: -40 to +85°C Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned. Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load Mechanical: inches (mm) not to scale Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. .250 (6.35) MAX .300 (7.62) 8 14 7 1 GND Vcon .807 (20.5) MAX .020 (.51) .300 (7.62) Vcc OUT .300 (7.62) OUT Vcc 5 8 4 1 GND .250 (6.35) MAX .492 (12.5) MAX .031 (0.8) .600 (15.24) .031 (0.8) .020 (.51) VC15: .236 (6.0) VC15 & VC16 VC16: .295 (7.5) MAX VC13 & VC14 .500 (12.7) MAX VC13: .200 (5.08) VC14: .315 (8.0) MAX Vcon .492 (12.5) MAX Jan 2004 Pl tronics, Inc. (425) 776 -1880, Fax: (425) 776-2760, [email protected], www.pletronics.com 23