MDS-00000350

Part Number: S7100PH‐C4
Package: 484L HSGBA (23x23mm)
Material Declaration
Statement of Materials, Construction
Material
Component
Name
Weight (g)
Element/Compound
1
2
Die
Underfill
0.1502
0.0170
3
Epoxy
0.0500
4
Heat Spreader
2.3620
5
Solder ball
0.3983
6
Substrate
0.6215
7
PSR Ink
0.0319
8
Build up
0.1195
9
Bump
0.0239
Silicon
Crystalline free silica
Liquid epoxy resin compound of bisphenol F type
Aminocompound
Treated Aluminum oxide
Others
Cu
NI (Metal)
Tin(Sn)
Silver(Ag)
Copper(Cu)
Copper Foil(Cu)
Glass cloth
Epoxy Resin including inorganic filler
Solvent Naphtha(Petroleum),Heavy Arom
Talc containing no asbestiform fibers
Morpholine Derivative
Barium Sulfate
Dipropylene Glycol Monomethyl Ether
Epoxy resin
Dipropylene glycol
N,N‐Dimethylformamide
Cyclohexanone
Bisphenol A epoxy resin
Silica
Coal tar naphtha
Toluene
Others
Tin(Sn)
Silver(Ag)
Copper (Cu)
Total Unit Weight:
Material Weight %
CAS No.
7440‐21‐3
‐
9003‐36‐5
‐
‐
‐
7440‐50‐8
7440‐02‐0
7440‐31‐5
7440‐22‐4
7440‐50‐8
7440‐50‐8
65997‐17‐3
‐
64742‐94‐5 14807‐96‐6
‐
7727‐43‐7 34590‐94‐8 ‐
34590‐94‐8 68‐12‐02
108‐94‐1
25068‐38‐6
7631‐86‐9
64742‐94‐5
108‐88‐3
‐
7440‐31‐5
7440‐22‐4
7440‐50‐8
Weight (g)
0.1502
0.0116
0.0039
0.0015
0.0438
0.0063
2.3485
0.0135
0.3844
0.0119
0.0020
0.2486
0.1865
0.1865
0.0035
0.0010
0.0010
0.0131
0.0054
0.0045
0.0035
0.0010
0.0016
0.0104
0.0394
0.0024
0.0002
0.0645
0.0231
0.0007
0.0001
/Total Unit
3.98
0.31
0.10
0.04
1.16
0.17
62.22
0.36
10.18
0.32
0.05
6.59
4.94
4.94
0.09
0.03
0.03
0.35
0.14
0.12
0.09
0.03
0.04
0.28
1.05
0.06
0.01
1.71
0.61
0.02
0.00
/ Component
100.00
68.00
23.00
9.00
87.50
12.50
99.43
0.57
96.50
3.00
0.50
40.00
30.00
30.00
11.00
3.00
3.00
41.00
17.00
14.00
11.00
0.80
1.30
8.70
33.00
2.00
0.20
54.00
96.50
3.00
0.50
3.77
Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors.
RoHS Certificate of Compliance
This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT. ⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant
⊠ China RoHS | Fully Compliant
⊠ RoHS‐6 | Fully Compliant
⊠ Non Use of PFOS & PFOA
⊠ REACH | Fully Compliant
EU RoHS Restricted Substance
Cadmium & its compounds (Cd)
Hexavalent Chromium & its compounds (Cr(VI))
Allowable Limit (at homogenous material level)
100 ppm (0.01 weight %)
1000 ppm (0.10 weight %)
Mercury & its compounds (HG)
1000 ppm (0.10 weight %)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Lead & its compounds (Pb)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
⊠ Halogen‐free | Green
⊠ Dodd‐Frank Wall Street Reform and Consumer Protection Act, July 21, 2010 We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware of any conflict metals to be used in any of their products.
⊠ Flammability rating of UL 94‐V0 ⊠ MSL: L3 @ 260C
Chiew Mee Foo, QA Manager
Exar Corporation
48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000
www.exar.com
Reference No: MDS‐00000350 Rev 000