MDS-00000355

Product: SP2526A‐2EN‐L Package: 8L NSOIC
Material Declaration
Statement of Materials, Construction
Component
Material Weight %
Material
Name
Weight (mg)
Element/Compound
CAS No.
1
Die
0.3120
Silicon
7440‐21‐3
0.3120
0.40
100.00
2
Die Attach
0.1920
Silver
7440‐22‐4
0.1440
0.18
75.00
Epoxy resin
‐
0.0288
0.04
15.00
1,4‐Butanedioldiglycidyl ether
02425‐79‐8
0.0144
0.02
7.50
3
4
Leadframe
Mold Compound
25.8670
Lead Finish
0.3120
6
Wire 0.8230
Total Unit Weight:
/Total Unit
/ Component
Amine
‐
0.0048
0.01
2.50
Copper
7440‐50‐8
24.8375
31.48
96.02
Iron
7439‐89‐6
0.6725
0.85
2.60
Phosporous
7723‐14‐0
0.0388
0.05
0.15
Zinc
7440‐66‐6
0.0517
0.07
0.20
Silver
7440‐22‐4
0.2587
0.33
1.00
Others
‐
0.0078
0.01
0.03
Silica Fused
60676‐86‐0
45.3374
57.46
88.20
Epoxy resin
‐
2.5702
3.26
5.00
Epoxy, Cresol Novolac
29690‐82‐2
0.7710
0.98
1.50
Phenol Resin
‐
2.5702
3.26
5.00
51.4030
5
Weight (mg)
Carbon Black
1333‐86‐4
0.1542
0.20
0.30
Sn
7440‐31‐5
0.3120
0.40
100.00
Copper
7440‐50‐8
0.8008
1.01
97.30
Palladium
7440‐05‐3
0.0222
0.03
2.70
78.9090
Component weight is based on homogenous material used to assemble the unit. | Composition derived from the material declaration from vendors.
RoHS Certificate of Compliance
This package is fully RoHS compliant. The table above shows that this package meets the following RoHS requirements for EACH PACKAGE COMPONENT. ⊠ RoHS 2 (Recast) 2011/65/EU | Fully Compliant
⊠ China RoHS | Fully Compliant
⊠ RoHS‐6 | Fully Compliant
⊠ Non Use of PFOS & PFOA
⊠ REACH | Fully Compliant
EU RoHS Restricted Substance
Cadmium & its compounds (Cd)
Hexavalent Chromium & its compounds (Cr(VI))
Allowable Limit (at homogenous material level)
100 ppm (0.01 weight %)
1000 ppm (0.10 weight %)
Mercury & its compounds (HG)
1000 ppm (0.10 weight %)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Lead & its compounds (Pb)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
1000 ppm (0.10 weight %)
⊠ Halogen‐free | Green
⊠ Dodd‐Frank Wall Street Reform and Consumer Protection Act, July 21, 2010 We comply with this conflict metal free policy that restricts the use of those conflict metals, mining from the Democratic Republic of Congo (DRC) and it’s adjoining countries. Exar will not accept product which uses these conflict metals from these areas. We require our suppliers to enforce this policy and be able to identify and verify from their sources of minerals are conflict free. Suppliers are required to report if they or any supplier through their supply chain use any of these conflict metals that are derived from certain conflict minerals originating in the DRC or an adjoining country. Exar Corporation is not aware of any conflict metals to be used in any of their products.
⊠ Flammability rating of UL 94‐V0 ⊠ MSL Pb‐Free: L1 @ 260°C
Chiew Mee Foo, QA Manager
Exar Corporation
48720 Kato Road, Fremont, CA 94538 Phone: 510‐668‐7000
www.exar.com
Reference No: MDS‐00000355 Rev 000