NJM2136/37/38 ULTRA WIDE BAND, HIGH SLEW RATE SINGLE OPERATIONAL AMPLIFIER ■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE The NJM2136, NJM2137 and NJM2138 are single, dual and quad operational amplifiers operated from low voltage (±1.35V). A 200MHz gain bandwidth and 45V/µs high slew rate make them suitable for use as active filter, high-speed analog and digital signal NJM2136M processor, industrial measurement equipment and others. It can also suitable to portable communication items because of low operating voltage and low operating current. ■ FEATURES ● Operating Voltage ±1.35V~±6V ● Wide Bandwidth 200MHz typ. ● High Slew Rate 45V/µs typ. ● Input Offset Voltage Balance (only NJM2136) ● Operating Current NJM2136: 0.63mA typ. NJM2137: 1.14mA typ. NJM2138: 2.27mA typ. ● Bipolar Technology ● Package Outline NJM2136: DMP8, SSOP8 NJM2137: DIP8, DMP8, SSOP8 NJM2138: DMP14, SSOP14 NJM2137D NJM2136V NJM2137M NJM2137V NJM2138M NJM2138V ■ PIN CONFIGURATION 1 8 2 - 7 3 + 6 4 5 NJM2136M NJM2136V PIN FUNCTION 1.BAL 2.–INPUT 3.+INPUT 4.V 5.NC 6.OUTPUT + 7. V 8.BAL 1 2 3 8 7 - + + - 4 6 5 NJM2137D NJM2137M NJM2137V PIN FUNCTION 1.A OUTPUT 2.A –INPUT 3.A +INPUT 4.V 5.B +INPUT 6.B -INPUT 7.B OUTPUT + 8.V 1 14 -+ 2 13 3 12 4 11 5 10 - + 6 +- 7 9 8 NJM2138M NJM2138V ■ EQUIVALENT CIRCUIT (each amplifier) V+ -INPUT +- PIN FUNCTION 1.A OUTPUT 2.A –INPUT 3.A +INPUT + 4.V 5.B +INPUT 6.B -INPUT 7.B OUTPUT 8. C OUTPUT 9. C -INPUT 10.C +INPUT 11.V 12.D +INPUT 13.D -INPUT 14.D OUTPUT OUTPUT +INPUT V- Ver.2008-02-27 -1- NJM2136/37/38 ■ ABSOLUTE MAXIMUM RATINGS ( Ta=25˚C ) PARAMETER SYMBOL + V /V VID Supply Voltage Differential Input Voltage Power Dissipation PD Operating Temperature Range Storage Temperature Range Topr Tstg RATINGS ± 6.75 ±3 (DIP8) 500 (DMP8) 300 (SSOP8) 250 (DMP14) 300 (SSOP14) 300 -40~+85 -50~+125 UNIT V V mW ˚C ˚C ■ ELECTRICAL CHARACTERISTICS ( V+/V-=±2.5V,Ta=25˚C ) PARAMETER Operating Voltage Input Offset Voltage Input Bias Current Input Offset Current Large Signal Voltage Gain Input Common Mode Voltage Range Common Mode Rejection Ratio SYMBOL + V /V VIO IB IIO AV VICM CMR +SVR -SVR +SVR -SVR Supply Voltage Rejection Ratio Maximum Output Voltage Swing VOM Operating Current (all Amp.) ICC Slew Rate Gain Bandwidth Product Phase Margin Unity Gain Bandwidth SR GB ØM fT TEST CONDITION RS=0Ω RL≥2kΩ -1V≤Vcm≤+1V NJM2136 NJM2137/NJM2138 RL=1kΩ NJM2136, RL=∞ NJM2137, RL=∞ NJM2138, RL=∞ AV=0dB 60dB • 500kHz 40dB 40dB MIN. ± 1.35 65 ±1.2 45 70 50 50 70 1.1 -0.9 120 - TYP. 1.0 0.5 20 75 ±1.5 60 80 60 60 80 1.4 -1.2 0.63 1.14 2.27 45 200 25 40 MAX. ± 6.00 5.0 2.0 200 0.82 1.50 3.00 - UNIT V mV µA nA dB V dB dB V mA V/µs MHz deg. MHz ■ OFFSET ADJUSTMENT METHOD (only NJM2136) V+ Rp=200Ω Rp 2 1 - 8 7 6 3 + 4 V - ( note ) The electrical characteristics change a little, in case the RP is connected. -2- Ver.2008-02-27 NJM2136/37/38 ■ TYPICAL CHARACTERISTICS Operating Current vs. Temperature Operating Current vs. Supply Voltage GV=0dB, Ta=25ºC 3.0 2.5 Operating Current [mA] Operating Current [mA] NJM2138 NJM2138 2.5 V+/V-=±2.5V, GV=0dB 3.0 2.0 1.5 NJM2137 1.0 NJM2136 0.5 2.0 1.5 NJM2137 1.0 0.5 0.0 NJM2136 0.0 0 1 2 3 4 Supply Voltage [V+/V-] 5 6 -50 Input Offset Voltage vs. Temperature 125 V+/V-=±2.5V, GV=0dB, Ta=25ºC 60 2.0 Input offset Current [nA] Input Offset Voltage [mV] 0 25 50 75 100 Ambient Temperature [ºC] Input Offset Current vs. Temperature V+/V-=±2.5V, GV=0dB, Ta=25ºC 3.0 -25 1.0 0.0 -1.0 -2.0 -3.0 40 20 0 -20 -40 -60 -50 -25 0 25 50 75 100 Ambient Temperature [ºC] 125 -50 -25 0 25 50 75 100 Ambient Temperature [ºC] 125 Input Bias Current vs. Temperature V+/V-=±2.5V, GV=0dB, Ta=25ºC 0 Input Bias Current [nA] -100 -200 -300 -400 -500 -600 -50 Ver.2008-02-27 -25 0 25 50 75 100 Ambient Temperature [ºC] 125 -3- NJM2136/37/38 ■ TYPICAL CHARACTERISTICS Maximum Output Voltage vs. Temperature Output Voltage vs. Load Resistance V+/V-=±2.5V, Gv=OPEN, RL=1KΩ 2.5 2 1.5 1.0 0.5 0.0 -0.5 -1.0 -VOM 1 0.5 0 -0.5 -1 -1.5 -1.5 -2.0 -2 -2.5 -50 -25 0 25 50 75 100 Ambient Temperature [ºC] -VOM -2.5 100 0k 125 Output Voltage vs. Output Source Current 0.0 V+/V-=±2.5V, Gv=OPEN, Ta=25ºC -0.5 Output Voltage [V] 2.0 1.5 1.0 0.5 -1.0 -1.5 -2.0 0.0 0.001 0.01 0.1 1 Output Source Current [mA] -2.5 0.001 10 Voltage Gain,Phase vs. Frequency 50 V+/V-=±2.5V, Gv=40dB, RL=2kΩ, CL=10pF, Ta=25ºC 0.01 0.1 1 Output Sink Current [mA] 15 90 V+/V-=±2.5V, Gv=0dB, RL=2kΩ, Ta=25ºC Phase 20 -45 10 -90 0 -135 100k 0M 1M 10M Frequency [Hz] -180 100M Voltage Gain [dB] 0 Phase [deg] Voltage Gain [dB] -4- CL=100pF 45 30 10 Voltage Follower Peak vs. Frequency Gain 40 -10 10k 0M 1M 1000k 1k 10k 100k Load Resistance [Ω] Output Voltage vs. Output Sink Current V+/V-=±2.5V, Gv=OPEN, Ta=25ºC 2.5 +VOM 1.5 +VOM Output Voltage [V] Maximum Output Voltage [V] 2.0 Output Voltage [V] V+/V-=±2.5V, Gv=OPEN, Ta=25ºC 2.5 10 CL=50pF CL=200pF CL=10pF 5 0 -5 100k 0M 1M 10M Frequency [Hz] 100M Ver.2008-02-27 NJM2136/37/38 ■ TYPICAL CHARACTERISTICS Total Harmonic Distortion vs. Output Voltage 10kHz 1 100kHz 0.1 1kHz 0.01 0.001 0.001 0.01 0.1 1 Output Voltage [Vrms] Gv=0dB, V+/V-=±2.5V, RL=2KΩ, Ta=25ºC 10 Total Harmonic Distortion [%] 10 Total Harmonic Distortion [%] Total Harmonic Distortion vs. Output Voltage GV=20dB, V+/V-=±2.5V, RL=2KΩ, Ta=25ºC 1 100kHz 0.1 0.01 0.001 0.001 10 10kHz 1kHz 0.01 0.1 1 Output Voltage [Vrms] 10 Pulse Response V+/V-=±2.5V, Gv=0dB, RL=2kΩ, CL=10pF, Ta=25ºC 1.5 7.5 6.0 INPUT 0.0 4.5 -1.5 3.0 -3.0 1.5 OUTPUT -4.5 0.0 -6.0 -1.5 -7.5 Output Voltage [V] Input Voltage [V] 3.0 -3.0 Time [0.2µsec./Div.] [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. Ver.2008-02-27 -5-