AC-DC Power Supplies VAN90 (90 WATT) (PRELIMINARY INFORMATION) Description: This product is a AC to DC power device for 90W with 12~20Vdc(different models) constant voltage and 6A (max.) current. Features: Wide Range AC Input Output Power 90 Watt (max) High Efficiency >85% Power Factor Correction Output Status LED Indicator Level B EMI Filter Fully Regulated Output Temperature & Humidity: Operating Temperature Range: Storage Temperature Range: Dimensions: 0ºC ~ +40ºC -20ºC ~ +80ºC L x B x H: 133 x 58 x 29,5 mm Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.3, 9th Sep 2011 AC-DC Power Supplies VAN90 (90 WATT) (PRELIMINARY INFORMATION) Electrical Characteristics: Input Output Protection Voltage Range Frequency Range AC Current DC Voltage/ Current VAN90-1200 DC Voltage/ Current VAN90-1500 DC Voltage/ Current VAN90-1900 Current Lim it Range Rated Power Hold Up Tim e Toleranz Efficiency Rippel & Nois e Short Circuit Protection Over Current Protection 90 ~ 264Vac 47 ~ 63Hz 1,5Arm s 12Vdc/ 5,0A 15~16Vdc/ 5,0A 18~20Vdc/4,74A 2,1~6A 90W >20m s @ Full Load/ 115Vac 5% >85% 1% Built-In Cons tant Current Type Safety / EMC Specification: Safety Referring Standards EMI UL UL1950 CE FCC FCC Clas s B CISPR 22 Clas s B VCCI Clas s B Order Key: Model No. Vout in Vdc Iout in A Pout in W VAN90-1200 VAN90-1500 VAN90-1900 12 15 19 5 5 4,75 60 80 90 Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.3, 9th Sep 2011 AC-DC Power Supplies VAN90 (90 WATT) (PRELIMINARY INFORMATION) Reliability: MTBF: When the power supply is operating within the limits of this specification the MTBF shall be at least 100,000 hours at 25ºC. Burn In: The power supply shall undergo a minimum 4 hours burn- in test at 40ºC ±5ºC under rated current. Input Terminal: Output Terminal: C101 C102 C103 C105 C106 C107 C109 C110 Note1: C104 C108 Ripple/Noise tested by dc-loading side parallel with a 10uF/E-Cap & 0.1uF/C-Cap and measured band-width DC-20MHz. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.3, 9th Sep 2011