PC822 Miniature Automotive PCB Power Relay FEATURES Miniature design 1 A, 1 B and 1 C contact forms available Contact switching capacity up to 100 Amps 45 Amps continuous carrying capacity Up to 125 degrees C operating temperature Both US and European footprints available Open frame, Sealed or Dust cover available Lead Free & RoHS Compliant CONTACT RATINGS CONTACT DATA 1 Form A or 1 Form C Normally Open Normally Closed Material Make 100 Amps Make 30 Amps Initial Contact Resistance Break 60 Amps Break 30 Amps Mechanical 1 X 10 Operations Max. Switching Voltage 16 VDC 16 VDC Electrical 2 X 10 5 Operations Max. Continuous Current 45 Amps 30 Amps Contact Form Max Switching Current Service Life AgSnOInO (Silver Tin Oxide Indium Oxide) AgCdO (Silver Cadmium Oxide) 100 milliohms max @ 0.1A, 6VDC 7 0.5 A @ 12 VDC Minimum Load CHARACTERISTICS Operate Time 5 ms. typical Release Time 3 ms. typical Insulation Resistance 100 megohms min, at 500VDC, 50%RH Dielectric Strength 750 Vrms, 1 min. between coil and contacts Shock Resistance 20 g, 11ms, functional; 200 g, destructive Vibration Resistance DA 1.27 mm, 10 - 40 Hz functional Drop Resistance 1 Meter height drop on concrete in final enclosure Power Consumption 1.6 W approx. Ambient Temperature Range -40 to 125 degrees C operating, -40 to 155 storage Weight Open: 19 grams; Enclosed: 21 grams approx. ORDERING INFORMATION Example: PC822 -1C -12 S -A L C -X Model Contact Form 1A, 1B or 1C Coil Voltage Enclosure Nil: Open Frame; S: Sealed; C: Dust Cover Footprint A: US (Narrow); A1 US with pin 4 remopved; E: European (Wide) Coil Sensitivity Nil: Standard Pull In; L: Low Pull In Contact Material Nil: AgSnOInO; C: AgCdO RoHS Compliant Nil: Not Rohs, -X: RoHS Compliant 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PC822 Rev D 8-5-09 PAGE 1 PC822 PC822 COIL DATA Resistance Coil Voltage _ 10% ohms + Standard Must Operate Voltage Max. (VDC) Special Low Pull In Voltage Max. (VDC) Must Release Voltage Min. Continuous Voltage Max. (VDC) (VDC) 4.2 3.3 0.6 7.8 6 19 9 42.6 6.3 5.1 0.9 11.7 12 90 8.4 6.8 1.2 15.6 18 202.5 12.6 10.2 1.8 23.4 13.9 2.4 31.2 16.8 360 24 Dimensions in Inches (millimeters) Side View End View 1.04 (26.5) .846 (21.5) Bottom View PC Board Layout .586 (14.9) .211 (5.35) .173 (4.4) .141 (3.6) .251 (6.4) .148 (3.75) .467 (12.1) .138 (3.5) .092 (2.33) .130 .467 (3.3) (12.1) .161 (4.08) .483 (12.28) Bottom View Wiring Diagram .087 (2.2) .087 (2.2) .520 (13.2) EUROPEAN FOOTPRINT US FOOTPRINT Bottom View PC Hole Sizes .055 (1.4) Dia. 2 Places Pin 4 This pin removed on version A1 .083 (2.1) Dia. 2 Places .087 (2.2) Dia. 3 Places Notes: Contact Form C shown On Contact Forms A & B Unused Pins are Omitted Tolerances + .010 unless otherwise noted Maximum make current refers to inrush of a lamp load Make current of 180 Amps permissable with AgSnOInO contacts In 85 degree C ambient reduce maximum coil voltage to 72% 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2 .626 (15.9) .398 (10.1) .148 (3.75) .251 (6.4) .846 (21.5) .232 (5.9)