RF AMPLIFIER MODEL BXMP1029 Medium Power Amplifier Available as: BXMP1029, SMA Connectorized Housing Features Typical Intermodulation Performance at 25 º C ! Ultra High Second Order Intercept: +91 dBm Typical ! High Output Power: +31.5 dBm Typical ! Environmental Screening Available Second Order Harmonic Intercept Point ...... +93 dBm (Typ.) Second Order Two Tone Intercept Point ....... +91 dBm (Typ.) Third Order Two Tone Intercept Point ........... +48 dBm (Typ.) Specifications CHARACTERISTIC TYPICAL Ta= 25 ºC MIN/MAX Ta = 0 ºC to +70 ºC Frequency 1 - 35 MHz 1 - 35 MHz 12 11 Min. 31.5 30 Min. Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) VSWR In Out Noise figure (dB) Power Vdc mA -15 1.8:1 1.8:1 4 +15 400 -14 Max. 2:0:1 Max. 2:0:1 Max. 5.0 Max. +15 425 Max. Maximum Ratings Ambient Operating Temperature .............. -55ºC to + 100 ºC Storage Temperature ............................... -62ºC to + 125 ºC Case Temperature ................................................. + 125 ºC DC Voltage ......................................................... + 18 Volts Continuous RF Input Power ................................. + 13 dBm Short Term RF Input Power .... 100 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.5 Watt (3 µsec Max.) Note: Care should always be taken to effectively ground the case of each unit. Typical Performance Data Legend + 25 ºC + 70ºC - - - - - - 0 ºC Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 Rev. 11/14/07 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001 4 DWG NO. 3 SH 088-00429 1 NOTE: 1. 55.25 2.18 MATERIAL: HOUSING ALUMINUM, NICKEL PLATED 2.54 .10 2.54 .10 50.17 1.98 4X 3.18 .13 THRU REV 1 OF 1 - REVISIONS ECN REV. DESCRIPTION 1494 - RELEASE CHNG/DATE APPVD/DATE 6.10 2x.24 D D API 2x 23.80 .94 34.87 1.37 BXMP1029 42.55 1.68 IN XXXX OUT 47.63 1.88 +15V 3.18 .13 DATE CODE C C 8.51 .34 12.70 .50 2X SMA FEMALE EMI FILTER GROUND LUG 4X 2-56 UNC .13[3.23] B B CAUTION 42.80 1.69 THIS ASSEMBLY CONTAINS PARTS SENSITIVE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). USE ESD PRECAUTIONARY PROCEDURES WHEN TOUCHING, REMOVING OR INSERTING ADD -U AFTER DRAWING NUMBER TO FORM COMPLETE PART NUMBER FOR UNPLATED PART A 3rd ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED 2.41 .10 7.62 .30 40.01 1.58 * INTERPRET DRAWING IAW ASME Y14.100-2004 * DIMENSIONING AND TOLERANCING IAW ASME Y14.5-1994 * PARENTHETICAL INFORMATION FOR REFERENCE ONLY * DIMENSIONAL LIMITS APPLY BEFORE PROCESSES * DIMENSIONS ARE IN INCHES * TOLERANCES ARE: ANGLES ±1.0° * SURFACE FINISH API TECHNOLOGIES CORP. PROPRIETARY INFORMATION 2 PLACE DECIMAL ±.02 4 3 * REMOVE ALL BURRS AND SHARP EDGES .010 RAD MAX. 2 DRAWN WAR CHECKED ENGRG 3 PLACE DECIMAL ±.005 * CONCENTRICITY MACHINED DIA: .002 FIM THIS DOCUMENT IS THE SOLE PROPERTY OF API TECHNOLOGIES CORP. THE RELEASE OF DATA CONTAINED IN THIS DOCUMENT AND THE * MACHINED TOOL MISMATCH: .002 MAX. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT THE WRITTEN PERMISSION OF API TECHNOLOGIES CORP. ARE PROHIBITED. DO NOT SCALE DRAWING COMPUTER ASSISTED DRAWING GENERATED USING SOLIDWORKS 2012 FORM NO. 1054 SIZE C1 63 api ANSI MFG HP QA APPROVED technologies corp. DATE 2014/11/13 A PHILADELPHIA OPERATIONS 2707 BLACK LAKE PLACE, PHILADELPHIA PA. 19154 (USA) TITLE OUTLINE, BXMP1029 2014/11/13 SIZE C SCALE: CAGE CODE 60979 DWG NO. 088-00429 SHEET 2:1 1 REV 1 - OF 1