RF AMPLIFIER MODEL BXMP1033

RF AMPLIFIER
MODEL BXMP1033
Medium Power Amplifier
Available as:
Features
„
„
„
„
High Output Power: +30.5 dBm Typical
High Third Order Intercept: +47 dBm Typical
Operating Temp. -55 ºC to +85 ºC
Environmental Screening Available
Frequency
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
TYPICAL
Ta= 25 ºC
1 - 50 MHz
MIN/MAX
Ta = -55 ºC to +85 ºC
1 - 50 MHz
35
34 Min.
+30.5
+30 Min.
-45
-40 Max.
In
Out
Noise figure (dB)
1.8:1
1.8:1
5.5
2.0:1 Max.
2.0:1 Max.
6.0 Max.
Power
+15
435
+15
500 Max.
VSWR
Vdc
mA
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ....... +60 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +54 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +47 dBm (Typ.)
Absolute Maximum (No Damage) Ratings
Specifications
CHARACTERISTIC
WNMP1033, 10 Pin .625” Sq. Gullwing Surface-Mount (SG4)
BXMP1033, SMA Connectorized Housing
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature .................................-62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +20 dBm
Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
Note: Care should always be taken to effectively ground and heatsink the
case of each unit.
Typical Performance Data
Legend
+25 ºC
+85ºC - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Rev.
6/9/10
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001