Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor ECWU(V16) Chip Type: Stacked metallized PEN film dielectric with simple moldless construction ■Features • Small in size • For reflow soldering • RoHS directive compliant ■Recommended Applications • DC Blocking for xDSL ■Explanation of Part Numbers 1 2 3 4 5 E C W U 2 Product code Dielectric & construction 6 Rated voltage 2 7 8 9 10 11 V 1 6 Capacitance 250 VDC Suffix VDC V16 for xDSL,Withstand: voltage:400 Cap.tol ±5 % ■Specifications Category temp.range (Including temperature-rise on unit surface) –55 ˚C to +85 ˚C Rated voltage 250 VDC 0.0010 µF to 0.12 µF (E12) ±5 %(J) Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) Soldering conditions Between terminals 400 VDC 60 s tan < =1.0 % (20 ˚C, 1 kHz) > IR=3000 MΩ (20 ˚C, 100 VDC, 60 s) Reflow soldering : 240 ˚C max. and 60 sec max. at more than 220 ˚C (Temp. at cap. surface) (Please consult us for Reflow 250 ˚C max product.) ❈ Application of this capacitor is limited to DC Blocking for xDSL, such as ADSL. ❈ Please consult us for 400 VDC rating product. ■Construction ■Dimensions in mm (not to scale) Size code E1 E2 E3a E3 D2 D3 D4 D5 B L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 H 1.4 2.0 2.4 2.8 2.0 2.4 2.8 3.2 ❈ ❈Refer to the column “Rating, Dimensions & Quantity”. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors ■Taping Specification for Automatic Mounting Refer to the page of taping specifications. ■ Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ± 5 % (J) Rated volt. 250 VDC Cap. (µF) Part No 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 ECWU2102V16 ECWU2122V16 ECWU2152V16 ECWU2182V16 ECWU2222V16 ECWU2272V16 ECWU2332V16 ECWU2392V16 ECWU2472V16 ECWU2562V16 ECWU2682V16 ECWU2822V16 ECWU2103V16 ECWU2123V16 ECWU2153V16 ECWU2183V16 ECWU2223V16 ECWU2273V16 ECWU2333V16 ECWU2393V16 ECWU2473V16 ECWU2563V16 ECWU2683V16 ECWU2823V16 ECWU2104V16 ECWU2124V16 Dimensions (mm) L 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 5.0 5.0 H 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 2.0 2.4 2.8 3.2 3.2 3.8 4.5 Size code E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B B B Q'ty 3000 2000 3000 2000 1500 ■Recommened for Land Dimensions (mm) Size code E1, E2, E3a, E3 D2, D3, D4, D5 B Land dimensions for reflow soldering A B C 2.6 3.8 3.8 6.6 7.8 7.8 3.0 3.8 4.6 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. ECWU (V16) Type (for xDSL) DC250V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics Frequency Characteristics at 1kHz 10 5 From 1000pF to 0.12uF 0 -5 Capacitance change(%) Capacitance change(%) 10 5 0.12uF 0 0.010pF 1000pF -5 -10 -10 -60 -40 -20 0 20 40 60 80 100 120140 1 10 Temperature (Degree C) 100 1000 10000 Frequency (kHz) 10 8 8 6 4 2 From 1000pF to 0.12uF Dissipation factor(%) Dissipation factor(%) at 1kHz 10 6 0.010pF 2 1000pF 0 0 -60 -40 -20 0 20 40 60 80 100 120140 Temperature (Degree C) 1.E+12 1 at DC 100V 10 100 1000 Frequency (kHz) 10000 10000 1000 1.E+11 From 1000pF to 0.12uF 1.E+10 1.E+09 1.E+08 Impedance(ohm) Insuration resistance(ohm) 0.12uF 4 1000pF 100 0.010pF 10 0.12uF 1 0.1 1.E+07 1.E+06 -60 -40 -20 0 20 40 60 80 100 120140 Temperature (Degree C) 0.01 1 10 100 1000 Frequency (kHz) 10000 100000 ECWU (V16) Type DC250V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 1 0.027 uF 0.010 uF,8200 pF 0.022 uF 0.018 uF 0.5 5600 pF, 4700 pF 0.015 uF 0.012 uF Effective value (A) Effective value (A) 3 2 6800 pF 0.12 uF 0.10 uF 1 3900 F 3300 pF 2700 pF 2200 uF 1800 pF 1500 pF 1200 pF 1000 pF 0.056 0.047 0.033 0.039 uF uF uF uF 0.068 uF,0.082uF 0 10 1 100 0 0.1 1000 1 Frequency (kHz) 10 Frequency (kHz) Permissible voltage 1000 Permissible voltage (at sine wave) (at sine wave) 100 10 0.027 uF 10 0.033 uF ~ 1000 pF Effective value (V) 100 ~ Effective value (V) 100 0.12 uF 1 0.1 0.1 1 1 10 Frequency (kHz) 100 1000 0.1 0.1 1 10 Frequency (kHz) 100 * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. 1000 ECWU (V16) Type DC250V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Voltage Capacitance Value(uF) Code 0.0010 102 0.0012 0.0015 0.0018 Capacitance Value(uF) Code 0.62 0.039 393 9.36 122 0.74 0.047 473 11.28 152 0.92 0.056 563 13.44 0.068 683 dv/dt(V/us) 182 Current(0-P ) (A) Rating Voltage DC 250V 1.11 615 DC 250V dv/dt(V/us) 240 Current(0-P ) (A) 16.32 0.0022 222 1.35 0.082 823 19.68 0.0027 272 1.66 0.10 104 24.00 0.0033 332 2.03 0.12 124 28.80 0.0039 392 2.40 0.0047 472 1.69 0.0056 562 2.02 0.0068 682 2.45 0.0082 822 2.95 0.010 103 3.60 0.012 123 0.015 153 5.40 0.018 183 6.48 0.022 223 7.92 0.027 273 9.72 0.033 333 11.88 360 4.32 DC Rated Voltage (V) 300 Voltage Derating by Temperature 250 200 150 100 50 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance.