COMMODORE CLASS - CHASSIS MOUNT WITH QUICK-CONNECT TERMINALS POWER TRANSFORMER 1. Electrical Specifications A. Maximum Power: 2.4VA B. Input Voltage and Frequency: 115V, 230V 50/60Hz C. Voltage Regulation: 18% TYP @ full load to no load D. E. Temperature Rise: 20 C TYP Insulation Resistance: < 1 MEG ohm F. 2. 3. Hi-Pot: 2500Vrms 1 minute @ Pri to Sec 2500Vrms 1 minute @ Pri to Core 1500Vrms 1 minute @ Sec to Core Marking: Ensign Corp, part number (see table), date code, country, terminal number Safety: UL/cUL 5085-2 Recognized (File 47299) UL 1446 Recognized Insulation System (File 95662) UL/cUL 5085-3 Class 2 Recognized (File E43609) CLASS 2 Part Number Primary Schematics Single Input (Specify 115V, 120V, 230V or 240V) 115V 115/230V 230V Secondary T002-1-710X - T002-3-710X 10VCT @ 250mA T002-1-712X - T002-3-712X 12.6VCT @ 200mA T002-1-716X - T002-3-716X 16VCT @ 150mA T002-1-720X - T002-3-720X 20VCT @ 120mA T002-1-724X - T002-3-724X 24VCT @ 100mA Secondary Schematics Single Output Center-Tapped Output POWER TRANSFORMER COMMODORE CLASS CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE Ensign Corporation T002-1-XXXX T002-3-XXXX Dim: Inches Sheet 1 of 1 201 ENSIGN RD., BELLEVUE, IA 52031 PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH ENSIGN RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING