Change Notice CN-0217 New Bicolor Alternating Legends KP01 & KP02, NP01 & UB2 Series KP01 & KP02 SERIES Blue LED Illumination 2013-07-05 NP01 SERIES UB2 SERIES Amber LED Illumination Series KP, NP01, & UB2 Alternating Legends Bicolor LED Illumination Paired with Alternating Legends Legends Change with New Super Bright Bicolors Extensive Variety New filter and wider array of illumination colors, indication, and product series. Bicolor: Red/Green and new Amber/Blue Indication: 10 standard options for legend text, with countless possibilities for custom orders Series: KP01 & KP02, NP01, UB2 Display Variation: As many as 240 bicolor alternating legend variations Efficient Management of Space One switch can now replace the two previously required to display both ON and OFF. Enables miniaturization of equipment and preservation of panel space. and changes the legends on the cap. NKK’s bicolor alternating legends use this method to create several patterns corresponding to the switch illumination color. When two types of color filter patterns are layered together, the two patterns will overlap if there is no white light source illuminating the filter from behind, or there is no irradiation (transmission, reflection of outside light). Blue LED Behind the Scenes Both LEDs installed in the switch have an individual wavelength of illumination depending on the LED color. The alternating legend film material has a specific characteristic that can absorb a certain range of the wavelength. For example, with the red/green bicolor LED, the material that absorbs the red color wavelength and the green color wavelength overlap one another Amber LED Each LED color is irradiated onto the above overlapping image. If the LED emission wavelength and the permeability of each pattern match, the overlapping pattern can be fractioned. Standard Alternating Legends Examples of Custom Alternating Legends Contact NKK Switches for expert assistance with your standard or custom legends. Experience bicolor alternating legend operations by clicking on the images of the switches. Visit our website: http://www.nkk.com 2 www.nkk.com Series KP, NP01, & UB2 Alternating Legends Three Series Share New Super Bright Bicolors (–) L2 Series KP01 & KP02 (+) COM Blue (–) L1 Amber The electrical specifications shown are determined at a basic temperature of 25°C. ATTENTION Miniature audio/video pushbutton incorporates a metallic pin rail that accentuates silent, smooth operation. 6DG ELECTROSTATIC SENSITIVE DEVICES Amber Blue Unit Minimum Luminous Intensity IV 204 113 mcd Unique actuation guide provides indications of circuit transfer. Tactile, nontactile, or tactile/audible choices. Standard Luminous Intensity IV 340 188 mcd Maximum Forward Current I FM 30 25 mA Typical Forward Current 20 20 mA Superb switching resistance exceeds 5 million operations. IF Forward Voltage VF 2.1 3.2 V Power Peak Dissipation PD 75 100 mW Maximum Reverse Voltage VRM 4 4 V Wavelength at Peak Emission λ 589 470 nm Current Reduction Rate Above 25°C ∆I F 0.40 0.33 mA/°C Compact size with longer stroke options of 4.5mm for KP01, or 3.5mm for KP02. Light operability with an operating force of 1.6N. Ambient Temperature Range LC2 (+) Series NP01 LC1 (+) Subminiature, smooth-operation pushbutton, soft touch actuation achieved by mechanical silicon rubber structure. –25 ~ +50 °C L4 (-) Blue L3 (-) Amber L2 (-) Amber L1 (-) Blue The electrical specifications shown are determined at a basic temperature of 25°C. ATTENTION ELECTROSTATIC SENSITIVE DEVICES D G Amber Blue Unit Entire cap is fully illuminated. Maximum Forward Current IFM 30 30 mA Both standard (1.5N ±0.5N) or high (2.5N ±0.8N) operating force options. Typical Forward Current IF 20 20 mA Forward Voltage VF 2.0 3.2 V Maximum Reverse Voltage VRM 5 5 V Current Reduction Rate Above 25°C ∆IF 0.40 0.40 mA/°C Compact design of only 12.5mm from PC board to top of cap. Ambient Temperature Range Series UB2 L1 (-) Amber LC (+) Compact miniature pushbutton has two-point pressure that insures secure lock structure. A hook pin that locks the cap is held using an elastic plate. By holding cap from both above and below, a stable lock results that resists vibration and damage from impact. Latchdown mechanism, independent of switching mechanism, affords outstanding stability and reliability plus visible and tactile indication of circuit status. Light operability in addition to long stroke of 2.3mm. L2 (-) Blue –25 ~ +50 °C The electrical specifications shown are determined at a basic temperature of 25°C. 6DG ATTENTION ELECTROSTATIC SENSITIVE DEVICES Amber Blue Unit 30 30 mA Maximum Forward Current IFM Typical Forward Current IF 15 15 mA Forward Voltage VF 2.0 2.8 V Maximum Reverse Voltage VRM 4 4 V Current Reduction Rate Above 25°C ∆IF 0.33 0.33 mA/°C Ambient Temperature Range –25 ~ +50 °C For KP01, KP02, NP01 & UB2 Series, LEDs are an integral part of the switch and not available separately. LED circuit is isolated and requires an external power source. If source voltage exceeds rated voltage, a ballast resistor is required. www.nkk.com 3 Series KP, NP01, & UB2 Alternating Legends TYPICAL SWITCH KP 01 15A Travel & Force Stroke: 4.5mm (.177”) Actuation Force: 1.9N 02 Stroke: 3.5mm (.138”) Actuation Force: 1.6N OFF K K C Tactile N Nontactile ( ) = Momentary Normally Open Contacts C Tactile N Nontactile S Tactile/Audible Black only A 9.2mm Plunger for 12.0mm Cap B 11.6mm Plunger for 15.0mm & 17.4mm Caps ORDERING EXAMPLE 6DG 2 S Cap Sizes LEDs Plungers 02 (ON) G03 Housing 01 Pole & Circuit SPST B Actuation 01 15A N Series KP, NP01, & UB2 Alternating Legends JDG Cap Types 6CF Super Bright Red/Green Bicolor 1 12.0mm Square F Flat 2 15.0mm Square S Sculptured 6DG Super Bright Amber/Blue Bicolor 3 17.4mm Square T Home Key Cap Colors JB Alternating Legends Clear Lens & White Diffuser Bicolor Alternating Legend Caps Contacts & Terminals Gold Contacts and Straight PC Terminals; 100mA @ 12V DC G03 11 JCF Red/Green JDG Amber/Blue Red/Green Amber/Blue Sculptured Cap Home Key Cap Part Number Part Number Part Number 12mm Square AT3093JCF11 ~ AT3093JCF20 AT3090JCF11 ~ AT3090JCF20 AT3096JCF11 ~ AT3096JCF20 15mm Square AT3094JCF11 ~ AT3094JCF20 AT3091JCF11 ~ AT3091JCF20 AT3097JCF11 ~ AT3097JCF20 17.4mm Square AT3095JCF11 ~ AT3095JCF20 AT3092JCF11 ~ AT3092JCF20 AT3098JCF11 ~ AT3098JCF20 12mm Square AT3093JDG11 ~ AT3093JDG20 AT3090JDG11 ~ AT3090JDG20 AT3096JDG11 ~ AT3096JDG20 15mm Square AT3094JDG11 ~ AT3094JDG20 AT3091JDG11 ~ AT3091JDG20 AT3097JDG11 ~ AT3097JDG20 17.4mm Square AT3095JDG11 ~ AT3095JDG20 AT3092JDG11 ~ AT3092JDG20 15 S AT3091 Sculptured Cap (7.0) .276 T (ON) G03 (15.0) Sq .591 Standard (1.5N) (Black Switch Body) High (2.5N) (Gray Switch Body) AT3098 Home Key Cap www.nkk.com STOP 14 OPEN CLOSE 15 OK NG (pos) (neg) 17 ECO POWER 18 ON AIR ERROR 19 REMOTE LOCAL N Illuminated 11 ON (pos) Nonilluminated 12 ON (neg) OFF (neg) 13 START STOP 14 OPEN CLOSE 15 OK NG Cap Lens/Diffuser Colors CF Red/Green DG Amber/Blue JB (7.0) .276 (17.4) Sq .685 Material: Polycarbonate Resin (12.0) Sq .472 (10.2) .402 11 Alternating Legends Clear/White Bicolor Alternating Legend Caps JCF Red/Green JDG Amber/Blue 16 (pos) Color Part Number AT3023JCF11 ~ AT3023JCF20 Amber/Blue AT3023JDG11 ~ AT3023JDG20 (neg) ECO POWER 18 ON AIR ERROR 19 REMOTE LOCAL 20 Packaging No Code Partitioned Tray, Any Quantity (With or without caps installed) S Stick-Tube 50 Pieces/Stick (For switch body only; caps packaged separately) Part Numbers for NP01 Alternating Legends Red/Green OFF (pos) 17 CAP FOR NP01 (2.6) Dia .102 (17.4) Sq .685 L Bicolor LED N O N (7.0) .276 START JDG Illumination Cap Types & Colors (7.0) .276 (15.0) Sq .591 O AT3092 Sculptured Cap N (17.4) Sq .685 O (7.0) .276 T DG LEDs AT3023 12.0mm Square Flat Cap S L Gold Contacts and PC Terminals, Rated 0.4VA @ 28V AC/DC (2.6) Dia .102 AT3097 Home Key Cap Materials & Finishes: Lens - Polycarbonate with glossy finish; Diffuser - Polycarbonate with textured finish 4 H Used on B Plunger N AT3095 Flat Cap A (12.0) Sq .472 N O (7.0) .276 O F (6.5) .256 G03 Used on B Plunger (15.0) Sq .591 17.4mm Square AT3096 Home Key Cap (2.6) Dia .102 N 3 O AT3094 Flat Cap T (6.5) .256 (12.0) Sq .472 N O N O F AT3090 Sculptured Cap (12.0) Sq .472 15.0mm Square N 2 O N AT3093 Flat Cap OFF Operating Force S (6.5) .256 SPST H Contacts & Terminals ( ) = Momentary Normally Open Contacts Used on A Plunger O F NP01 15 Pole & Circuit CAP TYPES FOR KP01 & KP02 12.0mm Square ON (neg) OFF (neg) 13 TYPICAL SWITCH ORDERING EXAMPLE See KP Ordering Table for Alternating Legend that corresponds with last 2 digits of part number. 1 12 OFF (pos) 20 Flat Cap Cap Size ON (pos) 16 Part Numbers for KP Alternating Legends Color 11 See NP01 Ordering Table for Alternating Legend that corresponds with last 2 digits of part number. www.nkk.com 5 Series KP, NP01, & UB2 Alternating Legends TYPICAL SWITCH UB2 1 5 Poles SK Circuits Mounting Types 1 SPDT 5 2 DPDT ( ) = Momentary SK 6 * Snap-in Mounting ON PCB Mounting (ON) ON ON Square KK Alternate Action with Latchdown G Contacts & Ratings W Silver Rated 5A @ 125/250V AC G Gold Rated 0.4VA max @ 28V AC/DC max Square * Standard with Solder Lug terminals TYPICAL ORDERING EXAMPLE UB2 01 K Mounting Types PCB Mounting 01 Square Cap Types & Colors Super Bright Bicolor LED Sculptured Cap with Alternating Legend Square 6CF Red/Green 6DG Amber/Blue Housing K Black 6DG LEDs Snap-in Mounting 04 W03 11 ON (pos) 12 ON (neg) OFF (neg) START STOP OFF (pos) Clear Lens 4JDG Clear Lens 14 OPEN CLOSE 15 OK NG Flat Cap with Alternating Legend 5JCF Clear Lens 5JDG Clear Lens Silver PC/Turret 15mm Square Sculptured Cap Alternating Legends 4JCF 16 (pos) (neg) 17 ECO POWER 18 ON AIR ERROR 19 REMOTE LOCAL 20 Part Numbers for UB2 Alternating Legends Color 11 13 Terminals W03 5JDG 15mm Square Flat Cap Part Number Part Number Red/Green AT3069JCF11 ~ AT3069JCF20 AT3070JCF11 ~ AT3070JCF20 Amber/Blue AT3069JDG11 ~ AT3069JDG20 AT3070JDG11 ~ AT3070JDG20 See NP01 Ordering Table for Alternating Legend that corresponds with last 2 digits of part number. CAP TYPES FOR UB2 5J AT3070J 15.0mm Square Flat Cap (15.0) Sq .591 6 Material: Polycarbonate www.nkk.com N (6.1) .240 O N AT3069J 15.0mm Square Sculptured Cap O 4J (5.6) .220 (15.0) Sq .591 Finish: Glossy Series KP, NP01, & UB2 Alternating Legends ORDERING EXAMPLE 03 6DG 5JDG 11 Terminals LEDS Cap Types & Colors Alternating Legends Solder Lug 01 (for Snap-in Mounting) Super Bright Bicolor LED Sculptured Cap with Alternating Legend 03 Straight PC 6CF Red/Green 6DG Amber/Blue 4JCF Clear Lens 4JDG Clear Lens Flat Cap with Alternating Legend 11 ON (pos) 12 ON (neg) OFF (neg) 13 START STOP 14 OPEN CLOSE 15 OK NG 16 (pos) OFF (pos) (neg) 5JCF Clear Lens 17 ECO POWER 5JDG Clear Lens 18 ON AIR ERROR 19 REMOTE LOCAL 20 TYPICAL SWITCH DIMENSIONS FOR KP01 & KP02, NP01 & UB2 15.0mm Square Cap (6.4) .252 (3.6) .142 (0.3) .012 (0.37) Typ .015 (7.62) .300 (0.6) Typ .024 (1.3) Dia Typ .051 L2 COM 1 (0.9) Dia Typ .035 (0.6) Dia Typ .024 1 (15.0) Sq .591 1a (4.5) .177 (12.7) .500 (0.25) .010 (1.1) .043 (7.0) (4.5) (11.5) .276 .177 .453 (23.0) .906 (7.62) .300 L1 1a L1 C L2 (5.08) +– 0.5 .200 (2.54) Typ .100 (12.7) .500 (15.0) Sq .591 (6.0) .236 (4.5) .177 (12.7) .500 (12.7) .500 KP0115ANBKG036DG-2SJB (2.1) .083 (2.0) Typ .079 L4 L3 (12.0) Sq .472 LC2 2 L1 L2 2 LC2 (0.3) Typ .012 (3.3) .130 L2 L1 CL (0.5) Typ .020 12.0mm Square Cap LC1 LC1 1 L3 L4 (7.0) .276 (10.2) .402 (12.5) .492 1 (2.0) Typ .079 (7.0) .276 (1.0) Dia Typ .039 NP0115HG03LF-JF 12.0mm Square Cap (6.1) .240 3 (5.08) Typ .200 (1.0) .039 (15.0) Sq .591 (1.5) .059 (0.5) .020 (7.0) (10.0) (4.0) .276 .394 .157 Latchdown Position (2.54) Typ .100 (0.5) Typ .020 3 LC 2 L2 (1.0) .039 N.O. COM N.O. COM L1 (2.54) .100 (5.08) .200 (5.08) .200 6 LC N.C. N.C. N.C. N.C. 1 (15.24) Sq .600 (1.0) .039 (1.0) .039 2 5 L2 1 N.O. COM N.O. COM L1 (5.08) .200 4 (2.54) .100 (1.0) Typ .039 (5.08) Typ .200 UB215SKG036DG-5JDG Single Pole Double Pole www.nkk.com UB226SKG036DG-5JDG 7 Series KP, NP01, & UB2 Alternating Legends STANDARD ALTERNATING LEGENDS FOR KP01 & KP02, NP01 & UB2 Super Bright LED: Red/Green ON OFF ON OFF ECO START STOP OPEN CLOSE OK NG Super Bright LED: Amber/Blue ON OFF POWER ON OFF ECO POWER ON AIR ERROR START STOP ON AIR ERROR REMOTE LOCAL OPEN CLOSE REMOTE LOCAL OK NG IMPRESSIVE ARRAY OF BICOLOR ALTERNATING LEDS SERIES Super Bright Bicolor LEDs in Amber/Blue or Red/Green KP01 KP02 NP01 UB UB2 Orders for discontinued products will be accepted until March 22, 2013. See Contact 206 for alternative part numbers. New products will be available July 5, 2013. http://www.nkkswitches.com • 1.877.2BUYNKK (228.9655) 7850 East Gelding Drive • Scottsdale, AZ 85260 • Telephone 480.991.0942 • Fax 480.998.1435 8 www.nkk.com Change Notice CN-0218 New Bicolor Alternating Legends UB Series Green LED Illumination 2013-07-05 Red LED Illumination Blue LED Illumination Amber LED Illumination Series UB Alternating Legends Distinctive Characteristics New bicolors red/green and amber/blue with alternating standard or custom legends. Super bright LED provides brilliant uniform illumination. Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square or rectangular models. Small behind panel dimension for snap-in mounting in tight spaces. Snap-acting contact mechanism provides sensitive actuation with audible feedback; quick-make, quick-break characteristic limits arcing and prolongs electrical life. Terminals are epoxy sealed to lock out flux, solvents, and other contaminants. The contact utilizes a microswitch structure, providing smooth operation with long strokes. Nonilluminated pushbuttons and matching indicators available. UL recognized and CSA certified models can be specified . The electrical specifications shown are determined at a basic temperature of 25°C. The LED is an integral part of switch and is not available separately. Super Bright Bicolor ATTENTION ELECTROSTATIC SENSITIVE DEVICES Red Green Unit The LED circuit is isolated and requires an external power source. Polarity marks are on bottom of switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. Super Bright Bicolor ATTENTION ELECTROSTATIC SENSITIVE DEVICES Amber Blue Unit Maximum Forward Current IFM 30* 30* mA Maximum Forward Current IFM 30 30 mA Typical Forward Current IF 20 20 mA Typical Forward Current IF 20 20 mA Forward Voltage VF 2.3 3.2 V Forward Voltage VF 2.1 3.0 V 4 4 V VRM 4 4 V 0.33 0.33 mA/°C Maximum Reverse Voltage Current Reduction Rate Above 25°C Ambient Temperature Range ∆IF 0.33 0.33 mA/°C Maximum Reverse Voltage VRM Current Reduction Rate ∆IF Above 25°C Ambient Temperature Range –25° ~ +50 °C –25° ~ +50 °C * The value is for single illumination of red or green. If both colors are illuminated, the value shall be applied to the sum of each current. LC (+) 2 L1 (-) Red LC (+) L2 (-) Green www.nkk.com L1 (-) Amber L2 (-) Blue Alternating Legends Series UB Bicolor LED Illumination Paired with Alternating Legends Legends Change with New Super Bright Bicolors Extensive Variety New filter and wider array of illumination colors, indication, and product series. Bicolor: New Red/Green and Amber/Blue Indication: 10 standard options for legend text, with countless possibilities for custom orders Series: UB Switches and Indicators Display Variation: As many as 280 bicolor alternating legend variations Efficient Management of Space One switch can now replace the two previously required to display both ON and OFF. Enables miniaturization of equipment and preservation of panel space. and changes the legends on the cap. NKK’s bicolor alternating legends use this method to create several patterns corresponding to the switch illumination color. When two types of color filter patterns are layered together, the two patterns will overlap if there is no white light source illuminating the filter from behind, or there is no irradiation (transmission, reflection of outside light). Blue LED Behind the Scenes Both LEDs installed in the switch have an individual wavelength of illumination depending on the LED color. The alternating legend film material has a specific characteristic that can absorb a certain range of the wavelength. For example, with the red/green bicolor LED, the material that absorbs the red color wavelength and the green color wavelength overlap one another Standard Alternating Legends Amber LED Each LED color is irradiated onto the above overlapping image. If the LED emission wavelength and the permeability of each pattern match, the overlapping pattern can be fractioned. Examples of Custom Alternating Legends Contact NKK Switches for expert assistance with your standard or custom legends. Experience bicolor alternating legend operations by clicking on the images of the switches. Visit our website: http://www.nkk.com www.nkk.com 3 Series UB Alternating Legends TYPICAL SWITCH ORDERING EXAMPLE UB 1 Poles 1 5 G 03 Mounting Types SK DPDT RK LEDs Square Rectangular Circuits ON (ON) ( ) = Momentary 6 ON ON 11 ON (pos) OFF (pos) 12 ON (neg) OFF (neg) Red/Green 13 START STOP 6DG Amber/Blue 14 OPEN CLOSE OK NG Square 15 NK Rectangular 16 Rectangular with NBK Side Barriers 11 6CF KK Cap Types & Colors * Standard with Solder Lug terminals Alternate Action with Latchdown JDG Alternating Legends Super Bright Bicolor LED * Snap-in Mounting 5 6DG PCB Mounting SPDT 2 SK Full Face Illuminated Cap/Diffuser (pos) (neg) 17 ECO POWER 18 ON AIR ERROR 19 REMOTE LOCAL 20 JB Clear Lens/White Diffuser Contacts & Ratings W Silver Rated 5A @ 125/250V AC G Gold Rated 0.4VA max @ 28V AC/DC max Alternating Legend Cap/Diffuser Terminals Solder Lug 01 (for Snap-in Mounting) JCF Red/Green JDG Amber/Blue 03 Straight PC CAP TYPES & COLOR COMBINATIONS Full Face Illuminated Caps for Super Bright Bicolor LED JB AT4074 Square Lens AT4188 Square Diffuser (3.0) .118 AT4117 Rectangular Lens (12.0) Sq .472 4 (12.0) .472 (0.5) .020 AT4189 Rectangular Diffuser (0.5) .020 (10.35) Sq .407 (3.0) .118 (17.0) .669 (10.35) .407 Lens & Diffuser Material: Polycarbonate Lens Finish: Glossy www.nkk.com (15.35) .604 Diffuser Finish: Textured Alternating Legends Series UB TYPICAL INDICATOR ORDERING EXAMPLE UB 01 K Mounting Types 6DG Housing PCB Mounting K Cap Types & Colors Black Full Face Illuminated Cap 01 Square 03 Rectangular * Snap-in Mounting 04 W03 Square 06 Rectangular 06B Rectangular with Side Barriers JB Terminals W01 Silver Solder Lug (for Snap-in Mounting) Silver Straight PC W03 (for PCB Mounting) LEDS * Standard with Solder Lug terminals Clear Lens/White Diffuser Bicolor Alternating Legend Cap/Diffuser for Square or Rectangular Red/Green 6DG Amber/Blue 11 Alternating Legends 11 ON (pos) 12 ON (neg) OFF (neg) 13 START STOP 14 OPEN CLOSE 15 OK NG 16 OFF (pos) (pos) (neg) JCF Red/Green 17 ECO POWER JDG Amber/Blue 18 ON AIR ERROR 19 REMOTE LOCAL 20 Super Bright Bicolor LED 6CF JDG Alternating Legend Caps for Super Bright Bicolor LED JCF JDG JCF (3.0) .118 AT4074 12.0mm Square Flat Cap (12.0) Sq .472 JDG AT4117 12.0mm x 17.0mm Rectangular Flat Cap AT9450 Square Legend Insert AT9451 Rectangular Legend Insert AT4188 Square Diffuser AT4189 Rectangular Diffuser (3.0) .118 (17.0) .669 (12.0) .472 Diffuser Lens & Diffuser Material: Polycarbonate Legend Insert Material: Polyethylene Terephthalate (PET) Lens Finish: Glossy Diffuser Finish: Textured Square Alternating Legends Color Red/Green Part Number Color Rectangular Alternating Legends Part Number Color Part Number Color Part Number AT9450CF11 AT9450DG11 AT9451CF11 AT9451DG11 AT9450CF12 AT9450DG12 AT9451CF12 AT9451DG12 AT9450CF13 AT9450DG13 AT9451CF13 AT9451DG13 AT9450CF14 AT9450DG14 AT9451CF14 AT9451DG14 AT9450CF15 AT9450CF16 Amber/ Blue AT9450DG15 AT9450DG16 Red/Green AT9451CF15 AT9451CF16 Amber/ Blue AT9451DG15 AT9451DG16 AT9450CF17 AT9450DG17 AT9451CF17 AT9451DG17 AT9450CF18 AT9450DG18 AT9451CF18 AT9451DG18 AT9450CF19 AT9450DG19 AT9451CF19 AT9451DG19 AT9450CF20 AT9450DG20 AT9451CF20 AT9451DG20 See UB Ordering Tables for Alternating Legend that corresponds with last 2 digits of part numbers. www.nkk.com 5 Series UB Alternating Legends TYPICAL SWITCH DIMENSIONS Square • PCB Mount (0.5) .020 (5.08) Typ .200 3 (5.08) Typ .200 (12.0) Sq .472 LC 6 L2 5 2 1 (5.08) .200 (2.5) .098 (1.0) .039 (15.24) Sq .600 (10.0) (4.0) .394 .157 Latchdown Position 2 5 L2 L1 (1.27) Typ .50 (1.0) Typ .039 (10.16) .400 1 4 4 L1 (2.54) Typ .100 (1.0) Typ .039 (5.08) Typ .200 (2.54) Typ .100 LC N.C. N.O. COM (0.5) Typ .020 3 6 (2.54) .100 (1.2) Dia Typ .047 CL Single pole models do not have terminals 4, 5, & 6. UB25SKG036DG-JDG11 Square • Snap-in Mount • Built-in Bezel (0.8) x (1.6) Typ .032 x .063 (1.4) .055 3 (5.08) Typ .200 (12.0) Sq .472 (17.8) Sq .701 UB25KKW016DG-JDG11 (2.5) .098 (1.0) .039 5 L2 N.O. COM N.O. COM L1 1 (1.0) Typ (1.27) Typ .039 .50 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” Single pole models do not have terminals 4, 5, & 6. Rectangular • PCB Mount (0.5) .020 (7.62) Typ .300 3 (5.08) Typ .200 (12.0) .472 (15.24) .600 5 (20.32) .800 UB25RKG036DG-JDG11 (2.5) .098 (1.0) .039 (10.0) (4.0) .394 .157 Latchdown Position N.O. COM L2 (5.08) .200 5 (1.27) Typ .050 (7.62) Typ .300 2 L2 L1 4 4 1 (2.54) Typ .100 (1.0) Typ .039 (0.5) Typ .020 L1 3 LC N.C. 2 (2.54) Typ .100 6 6 LC N.C. N.O. COM. (17.0) .669 (16.2) Sq .638 4 (2.0) Typ .079 (5.08) Typ .200 (10.0) (5.0) .394 .197 Latchdown Position (15.8) (5.08) .622 .200 N.C. 2 (2.54) Typ .100 (0.5) Typ .020 (4.0) .157 6 LC N.C. (1.0) Typ .039 (2.54) .100 (10.16) .400 1 CL (1.2) Dia Typ .047 Single pole models do not have terminals 4, 5, & 6. Rectangular • Snap-in Mount • Built-in Bezel (0.8) x (1.6) Typ .032 x .063 (1.4) .055 (5.08) Typ .200 (12.0) .472 (17.8) .701 (24.0) .945 UB26NKW016DG-JDG11 (2.5) .098 (1.0) .039 (0.5) Typ .020 (4.0) .157 6 LC N.C. 5 2 L1 N.O. COM L2 (1.27) Typ .050 (2.0) .079 (7.62) Typ .300 (0.8) x (1.6) Typ .032 x .063 3 (24.0) .945 (3.9) .154 (8.6) .339 (5.0) .197 (4.0) .157 (2.54) Typ .100 (2.0) .079 N.C. 5 2 L1 1 (7.62) Typ .300 Single pole models do not have terminals 4, 5, & 6. www.nkk.com 6 LC N.C. N.O. COM. (17.0) .669 (1.0) Typ .039 (22.4) .882 (22.0) .866 (5.08) Typ .200 (0.5) Typ .020 (16.2) .638 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” Single pole models do not have terminals 4, 5, & 6. (12.0) .472 (17.8) .701 (15.8) (5.08) .622 .200 4 1 (2.54) Typ .100 (10.0) (5.0) .394 .197 Latchdown Position Rectangular • Snap-in Mount • Built-in Side Barriers 6 3 N.C. N.O. COM. (17.0) .669 UB26NBKW016DG-JDG11 (22.0) .866 L2 N.O. COM (15.8) (5.08) .622 .200 (16.2) .638 4 (1.27) Typ .050 (1.0) Typ .039 (22.4) .882 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” Alternating Legends Series UB TYPICAL INDICATOR DIMENSIONS Square • PCB Mount (0.5) .020 LC (12.0) Sq .472 LC L2 (15.24) Sq .600 (2.5) .098 (5.08) .200 L1 (1.0) .039 (0.5) .020 (10.0) .394 L2 L1 (2.54) Typ .100 (4.0) .157 (2.54) .100 (1.2) Dia Typ .047 CL (2.54) .100 UB01KW036DG-JDG11 Square • Snap-in Mount • Built-in Bezel (0.8) x (1.6) .032 x .063 (0.5) .020 LC (12.0) Sq .472 (15.8) .622 L2 (16.2) Sq .638 L1 (17.8) Sq .701 (1.0) .039 (1.4) .055 (10.0) .394 (2.5) .098 (2.54) .100 (4.0) .157 (2.54) Typ .100 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” UB04KW016DG-JDG11 Rectangular • PCB Mount (0.5) .020 LC (12.0) .472 (15.24) .600 LC L2 L1 L1 (17.0) .669 (20.32) .800 (2.54) Typ .100 (1.0) .039 (0.5) .020 (10.0) .394 (2.5) .098 L2 (2.54) .100 CL (5.08) .200 (1.2) Dia Typ .047 (2.54) .100 (4.0) .157 UB03KW016DG-JDG11 Rectangular • Snap-in Mount • Built-in Bezel (0.8) x (1.6) .032 x .063 (0.5) .020 LC (12.0) .472 (17.8) .701 L1 (17.0) .669 (24.0) .945 (2.5) .098 (1.4) .055 (10.0) .394 (1.0) .039 (2.54) .100 (22.0) .866 (4.0) .157 L2 (1.0) .039 (24.0) .945 (3.9) .154 (8.6) .339 (4.0) .157 (22.4) .882 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” UB06KW016DG-JDG11 LC L1 (17.0) .669 (2.54) Typ .100 (16.2) .638 Rectangular • Snap-in Mount • Built-in Side Barriers (0.8) x (1.6) .032 x .063 (0.5) .020 (12.0) .472 (17.8) .701 (15.8) .622 L2 (2.54) .100 (22.0) .866 (16.2) .638 (15.8) .622 (2.54) Typ .100 (22.4) .882 Panel Thickness: (1.0 ~ 3.2mm) .039 ~ .126” UB06BKW016DG-JDG11 www.nkk.com 7 Series UB Alternating Legends STANDARD ALTERNATING LEGENDS Super Bright LED: Red/Green Super Bright LED: Amber/Blue ON OFF POWER ON OFF ECO POWER ON AIR ERROR START STOP ON AIR ERROR REMOTE LOCAL OPEN CLOSE REMOTE LOCAL OK NG ON OFF ON OFF ECO START STOP OPEN CLOSE OK NG IMPRESSIVE ARRAY OF BICOLOR ALTERNATING LEDS SERIES Super Bright Bicolor LEDs in Amber/Blue or Red/Green KP01 KP02 NP01 UB UB2 Specifications are subject to change. Contact factory for latest information. http://www.nkkswitches.com • 1.877.2BUYNKK (228.9655) 7850 East Gelding Drive • Scottsdale, AZ 85260 • Telephone 480.991.0942 • Fax 480.998.1435 8 www.nkk.com