CN-0216-TL-B Change Notice TL Series Change of Super Bright LED Specifications for TL22DNAW016F (Green LED) Type of Change: Engineering Product Part Number Appearance The TL Series illuminated toggle TL22DNAW016F with the green super bright LED will have changes to the specifications. The table below displays before and after modifications for this part number. TL22DNAW016F SUPER BRIGHT LED CODES & SPECIFICATIONS Super Bright LEDs are Electrostatic Sensitive. Electrical specifications are determined at a basic temperature of 25°C. The lamp circuit is isolated and requires an external power source. Before Change After Change 6F Green 6F Green ATTENTION ELECTROSTATIC SENSITIVE DEVICES Color Maximum Forward Current I FM 30mA 30mA Typical Forward Current IF 20mA 20mA Forward Voltage VF 3.5V 3.3V ( I F = 20 ) ( I F = 20 ) Maximum Reverse Voltage VR M 5V 7V Current Reduction Rate Above 25°C ∆I F 0.50mA/°C 0.40mA/°C –10°C ~ +55°C –10°C ~ +55°C Ambient Temperature Range R If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula shown here. + IF Anode VF E Cathode – R = Where: R = E = VF = IF = E – VF IF Resistor Value (Ohms) Source Voltage (V) Forward Voltage (V) Forward Current (A) Contact factory if further details are needed. Effective Date Changes to LEDs will be effective with October 2014 production. http://www.nkkswitches.com • 1.877.2BUYNKK (228.9655) 7850 East Gelding Drive • Scottsdale, AZ 85260 • Telephone 480.991.0942 • Fax 480.998.1435 2014/09/15 Engineering Department