Model(型號): 直滑式電位器---------S20C11H01 ►下載PDF文檔 特點: 極佳的操作手感，用於熱控器，清晰的定位手感 。用於電子樂器 ，平骨與濕滑的手感，低噪 音，長壽命，高精確的衰減調控。 作用: 電子琴、混音器的聲減調控汽車空調的熱控或模式轉換測量儀器。 Dimensions(規格圖 ): Specifications( 規格) Electrical Characteristics [ 電氣性能 ] Total resistance[全阻抗值] Total resistance tolerance [ 全阻抗值容許差 ] Ratings power(w) [ 額定功率 ] Resistance taper [ 阻抗變化特性 ] Residual resistance(1-2/2-3) [ 殘留阻值] Sliding noise [滑動雜音] Insulation resistance [絕緣阻抗] Withstanding voltage [耐電壓] Max. operating voltage [最高使用電壓] Mechanical Characteristics [ 机械性能 ] Operation torque [ 滑動力矩 ] Click slip out torque[掣子脫出力矩] Stopper strength[止動強度] Lever wobble[推柄搖晃] Level wobble[晃動間隙] Lever push-pull strength[推拉強度] Endurance Characteristics [ 耐久性能 ] Rotational life [ 回轉壽命 ] 1KΩ〜1MΩ ±30% B curve 0.1W, except B 0.05W A,B,*C,D Ra＜10KΩ 10KΩ<=Ra<=100KΩ 100KΩ＜Ra<=500KΩ 500KΩ＜Ra<=1MKΩ 100mV Max 50MΩ at DC 100V Min One minute AC 250V linear taper B AC 200V, other tapers AC 150V 20〜250gf-cm 40〜300gf-cm 5.0Kgf 3.0Kgf.cm max at 5 sec 2(2×L)/20mm Max. L=length of lever 3.0Kgf.cm max at 5 sec More than 15,000 cycles Min Http://www.productwell.com E-Mail: [email protected] Tel: ( 852)2687 3208 Fax: ( 852)2687 3336