Pb Free Product NCE01P18L http://www.ncepower.com NCE P-Channel Enhancement Mode Power MOSFET Description The NCE01P18L uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. It can be used in a wide variety of applications. It is ESD protested. General Features ● VDS =-100V,ID =-18A Schematic diagram RDS(ON) <100mΩ @ VGS=-10V (Typ:85mΩ) ● Super high dense cell design ● Advanced trench process technology ● Reliable and rugged ● High density cell design for ultra low On-Resistance Application ● Power management in notebook computer Marking and pin assignment ● Portable equipment and battery powered systems 100% UIS TESTED! 100% ∆Vds TESTED! TO-251S top view Package Marking and Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity NCE01P18L NCE01P18L TO-251S - - - Absolute Maximum Ratings (TC=25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage VDS -100 V Gate-Source Voltage VGS ±20 V ID -18 A ID (100℃) -12 A Pulsed Drain Current IDM -72 A Maximum Power Dissipation PD 70 W 0.56 W/℃ -55 To 150 ℃ Drain Current-Continuous Drain Current-Continuous(TC=100℃) Derating factor TJ,TSTG Operating Junction and Storage Temperature Range Wuxi NCE Power Semiconductor Co., Ltd Page 1 v1.0 Pb Free Product NCE01P18L http://www.ncepower.com Thermal Characteristic Thermal Resistance,Junction-to-Case (Note 2) RθJc 1.79 ℃/W Electrical Characteristics (TC=25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Drain-Source Breakdown Voltage BVDSS VGS=0V ID=-250μA -100 - - V Zero Gate Voltage Drain Current IDSS VDS=-100V,VGS=0V - - 1 μA Gate-Body Leakage Current IGSS VGS=±20V,VDS=0V - - ±20 μA Gate Threshold Voltage VGS(th) VDS=VGS,ID=-250μA -1 -1.9 -3 V Drain-Source On-State Resistance RDS(ON) VGS=-10V, ID=-16A - 85 100 mΩ gFS VDS=-50V,ID=-10A 5 - - S - 2100 - PF - 590 - PF - 140 - PF - 16 - nS Off Characteristics On Characteristics (Note 3) Forward Transconductance Dynamic Characteristics (Note4) Input Capacitance Clss Output Capacitance Coss Reverse Transfer Capacitance Switching Characteristics VDS=-25V,VGS=0V, F=1.0MHz Crss (Note 4) Turn-on Delay Time td(on) Turn-on Rise Time tr VDD=-50V,ID=-16A - 73 - nS td(off) VGS=-10V,RGEN=9.1Ω - 34 - nS - 57 - nS - 61 - nC - 14 - nC - 29 - nC Turn-Off Delay Time Turn-Off Fall Time tf Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd VDS=-80V,ID=-16A, VGS=-10V Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) Diode Forward Current (Note 2) Reverse Recovery Time VSD VGS=0V,IS=-18A - - -1.2 V IS - - - -18 A trr TJ = 25°C, IF =-18A - 88.3 - nS (Note3) - 65.9 - nC Reverse Recovery Charge Qrr Forward Turn-On Time ton di/dt = 100A/μs Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production 5. EAS condition：Tj=25℃,VDD=-50V,VG=-10V,L=0.5mH,Rg=25Ω Wuxi NCE Power Semiconductor Co., Ltd Page 2 v1.0 Pb Free Product http://www.ncepower.com NCE01P18L Test Circuit 1) EAS Test Circuit 2) Gate Charge Test Circuit 3) Switch Time Test Circuit Wuxi NCE Power Semiconductor Co., Ltd Page 3 v1.0 Pb Free Product NCE01P18L http://www.ncepower.com ID- Drain Current (A) Normalized On-Resistance Typical Electrical and Thermal Characteristics (Curves) TJ-Junction Temperature(℃) Vds Drain-Source Voltage (V) Figure 4 Rdson-JunctionTemperature ID- Drain Current (A) Vgs Gate-Source Voltage (V) Figure 1 Output Characteristics Vgs Gate-Source Voltage (V) Qg Gate Charge (nC) Figure 5 Gate Charge Is- Reverse Drain Current (A) Rdson On-Resistance(mΩ) Figure 2 Transfer Characteristics ID- Drain Current (A) Vsd Source-Drain Voltage (V) Figure 3 Rdson- Drain Current Wuxi NCE Power Semiconductor Co., Ltd Figure 6 Source- Drain Diode Forward Page 4 v1.0 Pb Free Product NCE01P18L ID- Drain Current (A) C Capacitance (nF) http://www.ncepower.com TC Case Temperature(℃) Vds Drain-Source Voltage (V) Figure 9 Drain Current vs Case Temperature ID- Drain Current (A) Power Dissipation (w) Figure 7 Capacitance vs Vds TJ-Junction Temperature(℃) Figure 8 Safe Operation Area Figure 10 Power De-rating r(t),Normalized Effective Transient Thermal Impedance Vds Drain-Source Voltage (V) Square Wave Pluse Duration(sec) Figure 11 Normalized Maximum Transient Thermal Impedance Wuxi NCE Power Semiconductor Co., Ltd Page 5 v1.0 Pb Free Product NCE01P18L http://www.ncepower.com TO-251S Package Information Symbol Dimensions In Millimeters Dimensions In Inches Min. Max. Min. Max. A 2.250 2.350 0.089 0.093 A1 1.150 1.250 0.045 0.049 B 10.200 10.800 0.402 0.425 b 0.550 0.650 0.022 0.026 b1 0.750 0.850 0.030 0.033 c 0.480 0.540 0.019 0.021 c1 0.480 0.540 0.019 0.021 D 6.400 6.600 0.252 0.260 D1 5.250 5.350 0.207 0.211 E 5.400 5.600 0.213 0.220 e1 2.300 TYP 0.091 TYP e2 2.300 TYP 0.091 TYP L 3.300 Wuxi NCE Power Semiconductor Co., Ltd 3.700 Page 6 0.130 0.146 v1.0 Pb Free Product http://www.ncepower.com NCE01P18L Attention: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications. NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein. Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use. This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice. Wuxi NCE Power Semiconductor Co., Ltd Page 7 v1.0