Ordering number : ENA1749 SMA3109 MMIC Amplifier, 3V, 16mA, 0.1 to 3.6GHz, MCPH6 http://onsemi.com Features • • • • • High Gain Wideband response Low current High output power Port impedance : Gp=23dB typ. @1GHz : fu=3.6GHz : ICC=16mA typ. : Po(1dB)=4dBm : input/output 50Ω Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 5 V 25 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Allowable Power Dissipation Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC82, SC82A, SC88 • Minimum Packing Quantity : 3,000pcs/reel 6 5 0.15 Type of Taping: TL 4 3 0.65 LF TL 0.3 0.85 0.25 2 LOT No. 1 LOT No. 0.07 Marking 0 to 0.02 2.1 1.6 0.25 2.0 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 MCPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 62310AM TK IM TC-00002386 No. A1749-1/7 SMA3109 Recommended Operating Conditions at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min VCC Topr Operating Ambient Temperature typ Unit max 2.7 3 3.3 V --40 +25 +85 °C Electrical Characteristics at Ta=25°C, VCC=3V, Zs=ZL=50Ω Parameter Symbol Circuit Current Ratings Conditions min ICC Power Gain Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power Po(1dB) Upper Limit Operating Frequency fu typ max 11.5 16.0 20.5 f=1GHz 21.0 23.0 26.0 f=2.2GHz 22.0 24.0 27.0 f=1GHz 27.0 31.5 f=2.2GHz 27.0 31.5 f=1GHz 16.0 20.5 f=2.2GHz 10.0 15.0 f=1GHz 15.0 20.0 f=2.2GHz 10.0 14.0 dB 4.3 5.0 4.3 5.0 4.0 6.4 2.0 4.2 3dB down below flat gain at f =1GHz 3.6 dB dB f=2.2GHz f=2.2GHz mA dB f=1GHz f=1GHz Unit dB dBm GHz Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF 100nH VCC Connect 2, 4 and 5 with GND. IT15580 No. A1749-2/5 SMA3109 Evaluation Board IN OUT C1 C2 L1 C3 Symbol Value C1, C2 VCC C3 100pF 1000pF L1 100nH ICC -- VCC 30 Circuit Current, ICC -- mA 25 20 15 10 5 0 0 1 2 3 Circuit Voltage, VCC -- V 4 IT15581 Gp -- f 35 25 Input Return Loss, RLin -- dB Power Gain , Gp -- dB 30 3.0V 3.3V 2.7V 20 15 10 5 0 1000 2000 Frequency, f -- MHz RLin -- f 0 3000 4000 IT15582 --5 --10 V 3.3 V 3.0 --15 2.7 V --20 --25 --30 0 1000 2000 Freqency, f -- MHz 3000 4000 IT15583 No. A1749-3/5 SMA3109 ISL -- f Isolation, ISL -- dB --20 3.0V 2.7V --30 3.3V --40 --50 0 1000 2000 3000 Freqency, f -- MHz --10 --15 V 3.3 3.0V V 2.7 --20 --25 --30 4000 0 1000 2000 3000 4000 Freqency, f -- MHz IT15585 Pout -- Pin 15 VCC=3.0V f=1.0GHz VCC=3.0V f=2.2GHz 10 Output Level, Pout -- dBm 10 Output Level, Pout -- dBm --5 IT15584 Pout -- Pin 15 RLout -- f 0 Output Return Loss, RLout -- dB --10 5 0 --5 5 0 --5 --10 --10 --15 --50 --40 --20 --30 --10 Input Level, Pin -- dBm --15 --50 0 --40 --20 --30 --10 0 Input Level, Pin -- dBm IT15586 IT15587 S Parameter S11 S22 50 50 100 25 250 10 100 25 250 10 3GHz 2GHz 10 0 50 100 250 10 0 25 25 50 3GHz 1GHz 100 250 1GHz 2GHz --10 --250 --25 --10 --250 --25 --100 --50 IT15588 --100 --50 IT15589 No. A1749-4/5 SMA3109 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1749-5/5