Ordering number : ENA1580A SMA3103 MMIC Amplifier, 5V, 19mA, 0.1 to 3.3GHz, MCPH6 http://onsemi.com Features • • • • • High Gain Wideband response Low current High output power Port impedance : Gp=26.5dB typ. @1GHz : fu=3.3GHz : ICC=19mA typ : Po(1dB)=5dBm : input/output 50Ω Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 6 V 40 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Allowable Power Dissipation Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 0 to 0.02 1 2 Marking TL 3 0.65 LC LOT No. 0.3 0.85 0.25 Packing Type : TL 4 LOT No. 0.07 SMA3103-TL-E 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 MCPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 72512 TKIM/N1109AM TKIM TC-00002164 No. A1580-1/8 SMA3103 Recommended Operating Condition at Ta=25°C Parameter Supply Voltage Operating Ambient Temperature Symbol Conditions VCC Topr Ratings min typ Unit max 4.5 5 5.5 V --40 +25 +85 °C Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Electrical Characteristics at Ta=25°C, VCC=5V, Zs=ZL=50Ω Parameter Circuit Current Symbol Conditions ICC Power Gain Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power Po(1dB) Upper Limit Operating Frequency fu Ratings min typ max 14.0 19.0 25.0 f=1GHz 24.0 26.5 29.0 f=2.2GHz 24.0 27.0 30.0 f=1GHz 31.0 33.0 f=2.2GHz 31.0 33.0 f=1GHz 12.0 20.0 f=2.2GHz 10.0 14.0 f=1GHz 12.0 20.0 f=2.2GHz 10.0 16.0 dB 4.7 5.3 4.7 5.3 6.0 8.2 4.0 5.7 3dB down below flat gain at f =1GHz 3.3 dB dB f=2.2GHz f=2.2GHz mA dB f=1GHz f=1GHz Unit dB dBm GHz Ordering Information Device SMA3103-TL-E Package Shipping memo MCPH6 3,000pcs./reel Pb Free No. A1580-2/8 SMA3103 Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF 100nH VCC Connect 2, 4 and 5 with GND. Design of the Evaluation Board IN OUT C1 L1 C2 C3 Symbol C1, C2 VCC Value C3 100pF 1000pF L1 100nH No. A1580-3/8 SMA3103 ICC -- VCC Circuit Current, ICC -- mA 25 20 15 10 5 0 0 1 2 3 4 5 Circuit Voltage, VCC -- V 6 IT15097 Gp -- f 30 RLin -- f 0 5.5V Input Return Loss, RLin -- dB --5 Power Gain , Gp -- dB 5.0V 4.5V 25 20 15 0 1000 2000 3000 Frequency, f -- MHz 5.0V 5.5V --40 --50 0 1000 2000 3000 Pout -- Pin --10 --30 --20 Input Power, Pin -- dBm --10 0 IT15102 3000 4000 IT15099 RLout -- f --10 5.0V 5.5V --15 4.5V --20 --25 --30 0 1000 2000 3000 4000 IT15101 Pout -- Pin 20 Output Power, Pout -- dBm Output Power, Pout -- dBm 0 --40 2000 Frequency, f -- MHz VCC=5.0V f=1.0GHz --50 1000 IT15100 10 --20 --60 0 --5 --35 4000 Frequency, f -- MHz 20 --30 Frequency, f -- MHz Output Return Loss, RLout -- dB Isolation, ISL -- dB --20 4.5V --25 0 --10 --30 V 4.5 --20 IT15098 ISL -- f 0 V 5.0 --15 --35 4000 V 5.5 --10 VCC=5.0V f=2.2GHz 10 0 --10 --20 --60 --50 --40 --30 --20 Input Power, Pin -- dBm --10 0 IT15103 No. A1580-4/8 SMA3103 S Parameter S11 S22 50 50 100 25 250 10 100 25 250 10 3GHz 25 10 0 2GHz 50 100 250 10 0 25 50 1GHz 100 250 3GHz 1GHz 2GHz --10 --250 --25 --10 --250 --25 --100 --50 IT15104 --100 --50 IT15105 No. A1580-5/8 SMA3103 Embossed Taping Specification SMA3103-TL-E No. A1580-6/8 SMA3103 Outline Drawing SMA3103-TL-E Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A1580-7/8 SMA3103 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1580-8/8