HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile Actual Size Product Description Frequency Range: The 49S Series is a miniature, AT or BT cut strip resonator crystal, housed in low profile 3.5mm high packaging. • 3.2 to 29.999 MHz, AT Fundamental • 30.0 to 54.000 MHz, AT 3rd OT • 26.8 to 54.000 MHz, BT Fundamental Product Features • • • • Low profile 3.5mm high AT or BT cut performance Resistance weld seal Pb-free and RoHS/Green compliant available Typical Applications • • • • • • Set-Top Box/Multimedia Clock/VCXO Multiplier Network Adapter Cards Modems Microcontrollers and Processors Remote control devices Characteristics at 25°C ±2°C: • Frequency Calibration Tolerance (as specified): ±30ppm, ±50ppm • Load Capacitance (as specified): 12 to 32pF or Series Resonance • Effective Series Resistance: 200Ω max (3.2 to 3.499MHz) 180Ω max (3.5 to 3.999MHz) 150Ω max (4 to 4.999MHz) 120Ω max (5 to 5.999MHz) 100Ω max (6 to 6.999MHz) 80Ω max (7 to 8.999MHz) 60Ω max (9 to 12.999MHz) 40Ω max (13 to 19.999MHz) 30Ω max (20 to 29.999MHz, AT Fund) 80Ω max (30 to 54MHz, AT (3rd overtone) 30Ω max (26.8 to 54MHz, BT Fund) • Drive Level: 100µW correlation, (500µW Max) • Shunt Capacitance: 7pF Max. Temperature Range: • Operating: –20 to +70°C ; -40 to +85°C (as specified) • Storage: –55 to +125°C Temperature Stability (as specified): • ±30ppm (–20 to +70°C) AT Cut • ±50 or ±100ppm (–40 to +85°C) AT Cut • 0 to -100ppm (–20 to +70°C) BT Cut Aging @ 25°C, first year: • ±3ppm (typ), ±5ppm (max) Reflow Temperature: • 240°C Max (non-RoHS package) • 260°C Max, 10 sec max (RoHS package) Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 1 All specifications are subject to change without notice. DS-112 Rev F | 06/20/06 HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile Packaging Information: 49S Package Marking Information ����� ��� ���� Line 1: ��� ��� ���� Line 2: ����� ��� ���� ���� ���� SxxxYYWWX 24.5760-xx ���� ��� ���� ���� ���� S = SaRonix xxx = Calib/Stability/Temp Code YYWWX = Date Code Frequency (up to 7 digits, including decimal point) Z = - (dash) for AT-cut parallel resonant = blank for AT-cut series resonant = B for BT-cut xx = Load Capacitance (leave Blank if Series) �� ������������������������������������������ ������ Ordering Information 49S XXX – XX Type Frequency (MHz) Frequency (in MHz) = 0x.xxxx, xx.xxxx (a zero is used in front of frequencies under 10 MHz) CUT TYPE: – (dash) = AT-cut Parallel Resonance Blank = AT-cut Series Resonance B = BT-cut, 26.8 to 50 MHz XXX X (X) (Q) = Manufactured in a TS16949 or QS9000 registered facility –E (dash E) = Lead (Pb)-free RoHS Compliant Version Blank = Non-RoHS (not available for new designs) Calibration / Stability / Temp Range GGC = ±30ppm / ±30ppm / -20 to +70°C GHE = ±30ppm / ±50ppm / -40 to +85°C HJE = ±50ppm / ±100ppm / -40 to +85°C * others available Load Capacitance xx = Parallel Resonance (specify load) Blank = Series Resonance Part Number Example: Spec: Freq 5.1234MHz, ±30ppm calib, ±30ppm stab, -20 to +70°C, 16pF = 49S05.1234-16GGC = 49S05.1234-16GGC–E (for lead-free) Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 2 All specifications are subject to change without notice. DS-112 Rev F | 06/20/06 HC-49/S Series Miniature Quartz Crystal HC-49, Low Profile Mechanical: • Shock: JESD22-B104 Condition B • Solderability: JESD22 method 1 (Predonditioning E) RoHS package • Terminal Strength: MIL-STD-883 Method 2004 • Vibration: JESD22-B103 • Solvent Resistance: JESD22-B107 • Resistance to Soldering Heat: JESD22-B106 (RoHS Package) Environmental: • Gross Test Leak: JESD22-A109, Condition C • Fine Test Leak: JESD22-A109, Condition A1 • Moisture Resistance: JESD22-A113 • Insulation Resistance: 500 MΩ min (100 VDC) Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 3 All specifications are subject to change without notice. DS-112 Rev F | 06/20/06