Not for new designs - see S1613 series S1703 Series 3.3V CMOS SMD Crystal Clock Oscillator (XO) Actual Size = 7 x 5mm Pin Functions Packaging Outline Product Features Pin Function • Pin-compatible with standard 7x5mm packages 1 OE Function • Designed for standard reflow and washing techniques 2 Ground 3 Clock Output 4 V DD • 3.3V CMOS compatible logic levels 7mm • Pb-free and RoHS/Green compliant available (seam seal package only) 5mm Product Description The S1703 Series is a 3.3V crystal clock oscillator. The output clock signal is compatible with CMOS logic levels. The device, available on tape and reel, is contained in a 7x5mm surface-mount ceramic package. Applications The S1703 Series is an ideal reference clock for SMT applications including: • PC, notebook/palmtop computers Common Frequencies Contact SaRonix for additional frequencies 3.6864 MHz 8.0000 MHz 10.0000 MHz 14.3181 MHz 16.0000 MHz 18.4320 MHz 20.0000 MHz 24.5760 MHz 25.0000 MHz 32.0000 MHz 32.7680 MHz 33.0000 MHz 35.3280 MHz 40.0000 MHz 48.0000 MHz 50.0000 MHz 60.0000 MHz 66.0000 MHz 66.6667 MHz 75.0000 MHz • Portable Applications • PCMCIA cards and HDD Ordering Information ������� � ���� ��������������������� ��������������������������� �������������������������������� ������������������������� �������������� ������������������������������������ ��������� ������������������� ����������������� ������������������������ ������������������������� ������������������������� ��������������������� ����������������������� ������������������������������������������������������ ������������������������������������������������� ���������������������������� Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 1 All specifications are subject to change without notice. DS 272 Rev A | 04/07/06 Not for new designs - see S1613 series S1703 Series 3.3V CMOS SMD Crystal Clock Oscillator (XO) Electrical Performance Parameter Min. Output frequency 1.8432 Supply voltage +2.97 Typ. +3.3 Max. Units 80 MHz +3.63 V DC 15 Supply current, output enabled mA 40 Operating temperature µA ±50 to ±100 ppM +70 °C 10% V DD V 0 Output logic 0, VOL Output logic 1, VOH 90% V DD Rise and fall time Output Hi-Z See Note 1 below V Output load Duty cycle > 34 to 50.0 MHz > 50 to 80.0 MHz 10 Frequency stability As specified 1.8432 to 34.0 MHz 25 Supply current, standby mode Notes 45 30 pF 55 % 0 to +70°C measured 50%VDD ns measured 20/80% of waveform 1.8432 to 64.0000 MHz 10 64.0001 to 66.667 MHz 6 66.667 to 80.0000 MHz 5 1.5 PS RMS (1 - σ) 10kHz ~ 20MHz Frequency Band Jitter, Accumulated 5 PS RMS (1 - σ) 20,000 adjacent periods Jitter, Total 50 PS pK - pK 100,000 periods Jitter, Phase Notes: 1. As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Max. 2.2 Input voltage (pin 1), Output Disable (low power standby) Internal pullup resistance Typ. 0.5 50 Units Notes V or open V Output is Hi-Z kΩ Output disable delay 150 ns Output enable delay 10 ms Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 2 All specifications are subject to change without notice. DS 272 Rev A | 04/07/06 Not for new designs - see S1613 series S1703 Series 3.3V CMOS SMD Crystal Clock Oscillator (XO) Absolute Maximum Ratings Parameter Min. Storage temperature Typ. -55 Max. Units +125 °C Notes Test Circuit Test Point Power Supply 0.1µF or 0.01µF 4 3 1 2 30 pF (Including probe and fixture capacitance) Output Enable / Disable Function Reliability Test Ratings This product is rated to meet the following test conditions (Applies to seam-seal package only): Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 3 All specifications are subject to change without notice. DS 272 Rev A | 04/07/06 Not for new designs - see S1613 series S1703 Series 3.3V CMOS SMD Crystal Clock Oscillator (XO) Output Waveform tf tr VOH 80% 50% 20% VOL tA Duty cycle = 100% tB x (tA) / (tA + tB) Reflow Soldering Profile Temperature – °C As per IPC/JEDEC J-STD-020C 260 1 to 3°C/sec max Peak 260°C for 10 sec max 1 to 3°C/sec 217 Time 60 to 90 sec 4 to 6 minutes max Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 4 All specifications are subject to change without notice. DS 272 Rev A | 04/07/06 Not for new designs - see S1613 series S1703 Series 3.3V CMOS SMD Crystal Clock Oscillator (XO) Mechanical Drawings Note: Seam seal package is depicted. Legacy glass-frit package has limited availability, please inquire if needed. Recommended Land Pattern* 4.2 .167 *External high-frequency power decoupling is recommended.(see test circuit for minimum recommendation). To ensure optimal performance, do not route traces beneath the package. Scale: None. Dimensions are in mm/inches. Marking LINE 1: Marking LINE 2: S3X Y Y WWX Frequency (SaRonix, Model, Stability, Year, Week, Origin) **Exact location of markings may vary. Pericom Semiconductor Corporation • 1-800-435-2336 • http://www.pericom.com/saronix 5 All specifications are subject to change without notice. DS 272 Rev A | 04/07/06