DESCRIPTION FEATURES APPLICATIONS BLOCK DIAGRAM

RS8016
1.5MHz, 1.2A, Synchronous
Step-Down DC/DC Converter
DESCRIPTION
FEATURES
The RS8016 Switch Regulator is a 1.2A step-down
converter with an input voltage range of 2.7V to 5.5V and
an adjustable output voltage from 0.6V to VIN The
1.5MHz switching frequency enables the use of small
external components. The small footprint and high
efficiency make the RS8016 an ideal choice for portable
applications.
The RS8016 delivers 1.2A maximum output current while
consuming only 45μA of no-load quiescent current.
Ultra-low RDS(ON) integrated MOSFETs and 100% duty
cycle operation make the RS8016 an ideal choice for
high output voltage, high current applications which
require a low dropout threshold.
The RS8016 provides excellent transient response and
high output accuracy across the operating range. No
external compensation components are required.
The RS8016 maintains high efficiency throughout the
load range. The RS8016’s unique architecture produces
reduced ripple and spectral noise. Over-temperature and
short-circuit protection safeguard the RS8016 and
system components from damage. The RS8016 is
available in DFN-6L package.











High efficiency: up to 96%
1.5MHz constant switching frequency
Output current up to 1.2A
Integrated Main switch and synchronous rectifier.
No schottky diode required
2.7V to 5.5V input voltage range
Output voltage as low as 0.6V
100% duty cycle in dropout
Quiescent current : 45μA (input < 4.2V)
Slope compensated current mode control for
excellent line and load transient response
Short circuit protection
<1μA Shutdown current
APPLICATIONS





Mobile phones
Personal information appliances
Wireless and DSL Modems
MP3 players
Portable instruments
BLOCK DIAGRAM
VIN
EN
OSC &
Shutdown
Control
Slope
Compensation
FB/VOUT
Current
Limit
Detector
Current
Sense
PWM
Comparator
Control
Logic
Driver
LX
Error
Amplifier
Current
Source
Controller
UVLO&
Power Good
Detector
Mux
Current
Detector
VREF
GND
Tel: 886-66296288‧Fax: 886-29174598‧ http://www.princeton.com.tw‧2F, No. 233-1, Baociao Rd., Sindian Dist., New Taipei City 23145, Taiwan
RS8016
APPLICATION CIRCUIT
ORDER INFORMATION
Device
RS8016-X YY Z
Device Code
X is nominal output voltage designator :
A : ADJ
YY is package designator :
DF: DFN-6
Z is Lead Free designator :
P: Commercial Standard, Lead (Pb) Free and Phosphorous (P) Free Package
PIN ASSIGNMENTS
DFN-6L
PIN DESCRIPTION
Symbol
NC
EN
VIN
LX
GND
FB / VOUT
V1.1
Description
No Internal Connect (Floating or Connecting to GND)
Chip Enable (Active High)
Power Input
Pin for Switching
Ground
Feedback / Output Voltage Pin
2
Pin No.
1
2
3
4
5,7
6
January 2014
RS8016
IMPORTANT NOTICE
Princeton Technology Corporation (PTC) reserves the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and to discontinue any product without notice at any time.
PTC cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a PTC product. No
circuit patent licenses are implied.
Princeton Technology Corp.
2F, 233-1, Baociao Road,
Sindian Dist., New Taipei City 23145, Taiwan
Tel: 886-2-66296288
Fax: 886-2-29174598
http://www.princeton.com.tw
V1.1
8
January 2014