ALUMINUM ELECTROLYTIC CAPACITOR VEJ Series: Surface Mount, 105°C, 2,000hrs RoHS FEATURES • • • • Standard 105°C, 2,000 hours assured Voltage Range 6.3 Vdc ~ 450Vdc, 4Φ ~ 18Φ Capacitance Range 1µF ~ 8,200 µF Automotive version available, TS-16949 PART NUMBER EXAMPLE VEJ 100 M 1H TR 050057 (1) VEJ Series (2) 10F Capacitance (3) ±20% Tolerance (4) 50V Rated Voltage (5) Tape and Reel Packaging (6) 5 x 5.7 mm can size RFE Internal Code SPECIFICATIONS Items Operating Temperature Range Capacitance Tolerance Leakage Current (at 20˚C) Dissipation Factor (Tan δ at 120Hz, 20˚C) Low Temperature Characteristics (at 120Hz) Endurance Shelf Life Test Ripple Current & Frequency Multipliers Performance 6.3 ~ 100V 160 ~ 450V -55 ˚C ~ +105˚C -40˚C ~ +105˚C Standard (+20% (at 120Hz, 20˚C), Option + 10% (at 120Hz, 20°C) Rated Voltage 6.3 ~ 100V 160 ~ 450V Time after 2 minutes after 5 minutes Case Size 4 ~ 10ɸ 12.5 ~ 18ɸ 12.5 ~ 18ɸ I = 0.01CV or 3 A, I = 0.03CV or 4 A, Leakage Current I = 0.04CV + 100 A whichever is greater whichever is greater Where, C = rated capacitance in µF V = rated DC working voltage in V Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450 4 ~ 10 0.45 0.35 0.28 0.18 0.16 0.14 0.12 0.12 12.5 ~ 18 0.25 0.40 0.38 0.34 0.26 0.22 0.18 0.14 0.10 0.20 When the capacitance exceeds 1,000µF, 0.02 shall be added every 1,000µF increase. Impedance ratio shall not exceed the values given in the table below. Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450 ɸD < 12.5 4 4 3 2 2 2 2 3 Z (-25˚C)/Z(+20˚C) Impedance ɸD < 12.5 5 4 3 2 2 2 2 2 3 6 Ratio ɸD < 12.5 12 8 6 4 3 3 3 4 Z(-55/-40˚C)/Z(+20˚C) ɸD < 12.5 10 8 6 4 3 3 3 3 6 10 Test Time 2,000 Hrs Within +25% of initial value for ɸ D < 6.3mm; Capacitance Change Within + 20% of initial value for ɸ D > 8mm Less than 300% of specified value for ɸ D < 6.3mm; Dissipation Factor less than 200% of specified value for ɸ D > 8mm Leakage Current Within specified value ∗ The above specifications shall be satisfied when the capacitors are restored to 20˚C after the rated voltage applied for 2,000 hrs at 105˚C Test Time: 1,000 hrs; other items are the same as those for the Endurance. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1). Freq. 10k (Hz) 50 120 1k up Cap. (µF) Under 1,000 0.80 1.00 1.25 1.40 1,000 < C < 8,200 0.85 1.00 1.15 1.25 Page 1 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CB08 2014.05.29 ALUMINUM ELECTROLYTIC CAPACITOR VEJ Series: Surface Mount, 105°C, 2,000hrs RoHS DIMENSION & PERMISSIBLE RIPPLE CURRENT Negative Polarity Date Code 1 Date Code Date Code Negative Polarity 1 Negative Polarity Rated Cap. Series Name 1 Series Name Rated Cap. Rated Cap. Rated Voltage & Series Code 1 Rated Voltage Rated Voltage Unit: mm V.DC 6.3V (0J) 10V (1A) µF 1 2.2 3.3 4.7 10 22 33 47 100 Code 010 2R2 3R3 4R7 100 220 330 470 101 ΦD x L 5.7 5.7 5.7 5.7 22 34 38 69 4 5 5 6.3 220 221 6.3 x 7.7 120 6.3 x 7.7 4 5 5 6.3 x x x x mA 330 331 8 x 10 290 470 471 8 x 10 320 1,000 2,200 102 222 10 x 10 12.5 x 13.5 410 680 3,300 332 12.5 x 16 850 4,700 472 ΦD x L x x x x 5.7 5.7 5.7 5.7 8 x 10 8 10 10 12.5 x x x x 16V (1C) mA ΦD x L mA 22 34 38 69 4 5 5 6.3 6.3 5.7 5.7 5.7 5.7 5.7 20 30 34 48 69 120 6.3 x 7.7 120 290 8 x 10 10 x 7.7 290 290 320 320 410 680 10 x 10 380 12.5 x 13.5 16 x 16.5 550 900 16 x 16.5 950 16 x 16.5 950 16 x 16.5 1,000 18 x 16.5 1,290 16 x 21.5 1,350 18 x 21.5 1,450 18 x 16.5 1,290 16 x 21.5 1,350 18 x 21.5 1,450 682 8,200 822 µF 3.3 4.7 10 22 33 47 100 V.DC 160V (2C) Code mA ΦDxL 3R3 4R7 100 220 330 12.5 x 13.5 95 470 16 x 16.5 240 101 16 x 16.5 250 x x x x x 10 7.7 10.3 13.5 16 x 16.5 1,000 6,800 25V (1E) 200V (2D) mA ΦD x L 12.5 12.5 12.5 16 18 x x x x x 13.5 16 16 16.5 16.5 80 10 120 220 280 18 x 16.5 1,225 16 x 21.5 1,275 250V (2E) ΦDxL 12.5 x 13.5 12.5 x 13.5 12.5 x 13.5 12.5 x 13.5 16 x 16.5 16 x 16.5 18 x 16.5 mA 60 65 70 105 180 220 260 35V (1V) 50V (1H) mA ΦDxL mA 4 4 5 6.3 6.3 6.3 8 10 5.7 5.7 5.7 5.7 5.7 7.7 10 7.7 17 20 30 46 48 100 270 270 4 5 6.3 6.3 6.3 8 5.7 5.7 5.7 5.7 7.7 10 17 27 44 46 80 240 8 x 10 270 8 x 10 290 10 x 10 370 12.5 x 13.5 490 16 x 16.5 650 18 x 16.5 590 16 x 21.5 750 10 x 10 380 12.5 x 13.5 520 12.5 x 16 16 x 16.5 700 18 x 21.5 980 12.5 16 18 16 x x x x 16 550 16.5 900 16.5 1,150 21.5 1,200 x x x x x x 16 x 16.5 800 18 x 16.5 1,050 mA 8 12 14 20 32 38 65 70 210 100V (2A) ΦD x L x x x x x x x x ΦDxL 4 x 5.7 4 x 5.7 4 x 5.7 5 x 5.7 6.3 x 5.7 6.3 x 5.7 6.3 x 7.7 6.3 x 7.7 8 x 10 63V (1J) mA ΦD x L ΦD x L 4 x 5.7 8 4 x 5.7 12 5 x 5.7 17 6.3 x 5.7 22 6.3 x 5.7 32 6.3 x 7.7 58 8 x 10 8 x 10 140 10 x 10 8 x 10 170 12.5 x 13.5 10 x 10.3 310 12.5 x 13.5 10 x 10.3 330 12.5 x 13.5 470 550 mA 100 150 250 380 16 x 16.5 450 18 x 16.5 990 18 x 21.5 1,300 400V (2G) DxL mA 12.5 12.5 16 18 18 x x x x x 13.5 13.5 16.5 16.5 21.5 45 50 85 100 130 450V (2W) DxL mA 12.5 x 13.5 40 12.5 x 13.5 45 12.5 x 16 75 16 x 16.5 85 18 x 16.5 100 LEAD SPACING AND DIAMETER D 4 5 6.3 6.3 8 10 10 10 13 13 16 16 18 18 5.7 5.7 5.7 7.7 10.0 7.7 10.0 10.3 13.5 16.0 16.5 21.5 16.5 21.5 L + + + + + + + + + + + + + + 0.3 0.3 0.3 0.3 0.5 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 A 4.3 5.3 6.6 6.6 8.4 10.4 10.4 10.4 13.0 13.0 17.0 17.0 19.0 19.0 B 4.3 5.3 6.6 6.6 8.4 10.4 10.4 10.4 13.0 13.0 17.0 17.0 19.0 19.0 C 5.1 5.9 7.2 7.2 9.0 11.0 11.0 11.0 13.7 13.7 18.0 18.0 20.0 20.0 W P+0.2 Fig. No. 0.5 ~ 0.8 1.0 1 0.5 ~ 0.8 1.5 1 0.5 ~ 0.8 2.0 1 0.5 ~ 0.8 2.0 1 0.7 ~ 1.1 3.1 1 0.7 ~ 1.3 4.7 1 0.7 ~ 1.3 4.7 1 0.7 ~ 1.3 4.7 1 1.1 ~ 1.4 4.4 2 1.1 ~ 1.4 4.4 2 1.1 ~ 1.4 6.4 2 1.1 ~ 1.4 6.4 2 1.1 ~ 1.4 6.4 2 1.1 ~ 1.4 6.4 2 Page 2 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CB08 2014.05.29 ALUMINUM ELECTROLYTIC CAPACITOR VEJ Series: Surface Mount, 105°C, 2,000hrs RoHS TAPING SPECIFICATIONS ΦD x L A 3 ~ 4 x 4.5 ~ 5.3 5.0 F P 5.0 B d 5.5 8.0 P1 P2 t1 5.8 t2 W 4 x 5.7 5.0 5.0 5.5 8.0 6.2 5 x 4.5 ~ 5.3 6.0 6.0 5.5 12.0 5.8 5 x 5.7 (*) 6.0 6.0 5.5 12.0 6.2 6.3 x 4.5 ~ 5.3 7.0 1-1 6.2 7.5 12.0 0.4 8.3 8 x 6.5 6.8 8.7 16.0 6.8 6.3 x 7.7 1-2 6.8 8.7 8 x 10 11.0 1.5 8 x 12* 2.0 4.0 13.0 11.5 16.0 10 x 7.7* 10 x 10 (9.9*) 12.0 6.2 7.0 6.3 x 7.0* 8 x 6.7* Fig. No. 5.8 6.3 x 5.7 6.3 x 5.9* W1 1.75 10.0 24.0 10.7 10.7 11.0 10 x 12.7* 14.0 12.5 x 13.5 13.4 13.4 14.2 24.0 15.0 32.0 12.5 x 13.5 (G) 13.7 13.7 14.2 24.0 15.0 32.0 17.5 32.0 12.5 X 16 13.4 13.4 14.2 24.0 12.5 X 16 (G) 13.7 13.7 14.2 24.0 16 X 16.5 17.5 17.5 20.2 28.0 16 X 16.5 (G) 17.5 17.5 20.2 28.0 17.5 44.0 16 X 21.5 17.5 17.5 20.2 28.0 22.5 44.0 18 X 16.5 19.5 19.5 20.2 32.0 17.5 44.0 18 X 21.5 19.5 19.5 20.2 32.0 22.5 44.0 Tolerance + 0.2 + 0.2 +0.1 / -0 + 0.1 + 0.2 + 0.1 + 0.1 + 0.1 + 0.2 + 0.3 + 0.15 17.5 44.0 0.5 1-3 17.5 44.0 REEL SPECIFICATIONS Unit: mm Case Size 3 ~ 4Φ 5Φ 6.3Φ 8Φ x 6.5 ~ 7.0L 8Φ x 10 ~ 12L 10Φ W 14 14 18 18 26 26 A 380 380 380 380 380 380 t 2.0 2.0 2.0 2.0 2.0 2.0 12.5Φ 34 16 ~ 18Φ 46 380 / 450 380 / 450 3.0 3.0 Page 3 of 3 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CB08 2014.05.29