TX7-503 Accurate analogue temperature compensated SMD TCXO Features Applications: mobile communications, GPS, instrumentation Output signal Clipped sine wave or CMOS Frequency range up to 40.000 MHz Highly shock and vibration resistant Parameter Specification Frequency range 10 ~ 40.000 MHz Standard frequencies 10.0, 12.8, 16.0, 19.2, 20.0, 24.0, 25.0, 26.0, 32.768 & 40.0 MHz Frequency stability: vs. temperature vs. supply change ≤ ±0.5 ~ ±2.5 ppm ≤ ±0.1 ~ ±0.28 ppm ≤ ±0.1 ppm 10.0 ~ 40.0 MHz 10.0 ~ 26.0 MHz ±5 % vs. load change ≤ ±0.1 ppm ±5 % vs. aging ≤ ±1.0 ppm 1 year -40 ~ +85 °C -20 ~ +70 °C st ≤ ±0.5 ppm @ +25 °C Frequency tolerance ex. factory Supply voltage +2.8, +3.0, +3.3 & +5.0 V Supply current < 5 mA Type TX7-503 TX7-503C Output signal clipped sine wave CMOS Output level > 0.8 Vp-p VOH > 0.9 x Vdc / VOL < 0.1 x Vdc Output load 10 kΩ // 10 pF 15 pF Tri-state function pin #1 high or open pin #1 low pin #3 oscillation pin #3 high impedance Phase noise @ 10.0 MHz carrier frequency @ 100 Hz @ 1 kHz @ 10 kHz commercial application industrial application Storage temperature range -125 dBc/Hz -145 dBc/Hz -155 dBc/Hz -20 ~ +70 °C -40 ~ +85 °C -55 ~ +125 °C Packaging units tape & reel 1’000 or 2’500 pieces Operating temperature range Customer specifications on request Pin function #1 #2 #3 #4 Solder pattern Tri-state or not connected GND Output Vdc IR reflow soldering temperature 2011/65/EU RoHS compliant QuartzCom AG Bischmattstrasse 11 CH 2544 Bettlach Switzerland Fax Tel E-Mail +41 32 644 24 05 +41 32 644 24 00 [email protected] www.quartzcom.com 07 Mar. 14