D9 BYV28-200 C7 680 uF 35 V Product Selector Guide LED Driver Products D8 F4002 C6 20 uF 25 V March 2008 R4 10 kΩ 5% R2 499 Ω 1% R3 1.00 kΩ 1% Q1 PN2907A U1 TOP246F 1 kΩ % C5 1.0 uF D7 1N4148 R5 3.01 kΩ 1% C8 100 uF 25 V R8 1 U2 PC81711NSZ R9 1 Product Selector Guide ® LinkSwitch-TN ® TOPSwitch-HX ® TinySwitch-III ® LinkSwitch-XT 0.5 W 5W 6W 10 W 20 W 100 W Output Power (Enclosed Adapter) IC Product Tables and Design Examples Very Low Power AC-DC, Non-Isolated Linear/Passive Supply Replacement (≤360 mA) Product4 Output Current1 MDCM2 LinkSwitch-TN LNK302 LNK304 LNK305 LNK306 PN/GN/DN PN/GN/DN PN/GN/DN PN/GN/DN CCM3 230 VAC ± 15% 63 mA 120 mA 175 mA 225 mA 80 mA 170 mA 280 mA 360 mA Output Current1 MDCM2 CCM3 85-265 VAC 63 mA 120 mA 175 mA 225 mA 80 mA 170 mA 280 mA 360 mA Additional Features: • • • • • • • 700 V Internal MOSFET Rating Self-Powered ON/OFF Control Hysteretic Thermal Shutdown Power Limiting Frequency Jitter Reduces EMI EcoSmart® Low Standby/No-load Power Consumption Notes: 1. Typical output current in a non-isolated buck converter. Output power capability depends on respective output voltage. See Key Applications Considerations section for complete description of assumptions, including fully discontinuous conduction mode (DCM) operation. 2. Mostly discontinuous conduction mode. 3. Continuous conduction mode. 4. Packages: PN: DIP-8B, GN: SMD-8B, DN: SO-8C. Very Low Power AC-DC Power Conversion (Up to 9 W) Continuous Output Power Product Adapter1 LinkSwitch-XT3 LNK362 PN/GN/DN LNK363 PN/GN/DN LNK364 PN/GN/DN Open Frame2 230 VAC ± 15% 2.8 W 5W 5.5 W 2.8 W 7.5 W 9W Continuous Output Power Adapter1 Open Frame2 85-265 VAC 2.6 W 3.7 W 4W 2.6 W 4.7 W 6W Additional Features: • • • • 700 V Internal MOSFET Rating Hysteretic Overtemperature Protection Power Limiting EcoSmart® Low Standby/No-load Power Consumption Notes: 1. Minimum continuous power in a typical non-ventilated enclosed adapter measured at 50 °C ambient. 2. Minimum practical continuous power in an open frame design with adequate heat sinking, measured at 50 °C ambient. 3. Packages: PN: DIP-8B, GN: SMD-8B, DN: SO-8C. Please see Part Ordering Information. Low Power AC-DC Power Conversion (Up to 36.5 W) Product3 Continuous Output Power Adapter1 TinySwitch-III TNY274 TNY275 TNY276 TNY277 TNY278 TNY279 TNY280 PN/GN PN/GN PN/GN PN/GN PN/GN PN/GN PN/GN Open Frame2 230 VAC ± 15% 6W 8.5 W 10 W 13 W 16 W 18 W 20 W 11 W 15 W 19 W 23.5 W 28 W 32 W 36.5 W Continuous Output Power Adapter1 Open Frame2 85-265 VAC 5W 6W 7W 8W 10 W 12 W 14 W 8.5 W 11.5 W 15 W 18 W 21.5 W 25 W 28.5 W Additional Features: • • • • • • • • • 700 V Internal MOSFET Rating Self-Powered Hysteretic Overtemperature Protection Frequency Jitter Reduces EMI EcoSmart® Low Standby/No-load Power Consumption On-Time Extension Latching Output Overvoltage Protection Line Undervoltage (UV) Lockout Selectable Current Limit Notes: 1. Minimum continuous power in a typical non-ventilated encased adapter with minimal heat sinking, measured at a device ambient of 50 °C. 2. Minimum continuous power in an open frame with adequate heat sinking. TinySwitch-III operates without bias winding. 3. Packages: PN: DIP-8C, GN: SMD-8C. Lead-free package options are available for P and G packages. High Power AC-DC Power Conversion (Up to 333 W) Continuous Output Power 3 Product Adapter1 Adapter1 230 VAC ± 15%4 TOPSwitch-HX TOP252 TOP252 TOP252 TOP253 TOP253 TOP253 TOP254 TOP254 TOP254 TOP255 TOP255 TOP255 TOP256 TOP256 TOP256 TOP257 TOP257 TOP257 TOP258 TOP258 TOP258 TOP259 TOP260 TOP261 Open Frame2 Continuous Output Power PN/GN MN EN PN/GN MN EN PN/GN MN EN/YN PN/GN MN EN/YN PN/GN MN EN/YN PN/GN MN EN/YN PN/GN MN EN/YN EN/YN EN/YN EN/YN Open Frame2 85-265 VAC Additional Features: 9W 15 W 6W 10 W 10 W 21 W 6W 13 W 15 W 25 W 9W 15 W 21 W 43 W 13 W 29 W 16 W 28 W 11 W 20 W 30 W 62 W 20 W 43 W 19 W 30 W 13 W 22 W 40 W 81 W 26 W 57 W 21 W 34 W 15 W 26 W 60 W 119 W 40 W 86 W 25 W 41 W 19 W 30 W 85 W 157 W 55 W 119 W 29 W 48 W 22 W 35 W 105 W 128 W 147 W 177 W 195 W 238 W 275 W 333 W 70 W 80 W 93 W 118 W 148 W 171 W 200 W 254 W • • • • • 700 V Internal MOSFET Rating Accurate Programmable Current Limit Hysteretic Overtemperature Protection Power Limiting Multi-mode Operation for Maximum Efficiency Under All Load Conditions • Frequency Jitter Reduces EMI • Line Undervoltage Detection • Line Overvoltage Detection • EcoSmart® Low Standby/No-load Power Consumption • Output Overvoltage Protection (OVP) • Optimized Line Feed-forward for Line Ripple Rejection • Fully Integrated Soft-start for Minimum Start-up Stress • Tight I2f Parameter Tolerances (Reduces System Cost & Overload Power) • Half-frequency Option for Y Package • Auto Restart - Limits Power to <3% of Maximum Power During Short-circuit/ Open-loop Fault Notes: 1. Minimum continuous power in a typical non-ventilated enclosed adapter measured at 50 °C ambient. Use of an external heat sink will increase power capability. 2. Minimum continuous power in an open frame design at +50 °C ambient. 3. Peak power capability in any design at +50 °C ambient. 4. 230 VAC or 110/115 VAC with doubler. 5. Packages - PN: DIP-8C, GN: SMD-8C, MN: SDIP-10C, YN: TO-220-7C, EN: eSIP-7C. LinkSwitch-TN – Non-Isolated Constant Current LED Driver (DI-92) 0.5 W, 12.9 V, 40 mA OUTPUT, 85 – 265 VAC INPUT BUCK-BOOST CONVERTER D1 1N4007 RF2 47 Ω FB D RF1 8.2 Ω, 1 W Fusible D3 UF4005 RTN S LinkSwitch-TN U1 LNK302PN C1 2.2 uF 400 V 85 - 265 VAC C3 0.1 uF 50 V BP C2 2.2 uF 400 V L1 1 mH 12.9 V, 40 mA PI-4985-012308 LinkSwitch-TN – Non-Isolated, Constant Current Light Bulb Replacement (RDK-131) 3 W, 9 V – 15 V, 300 mA OUTPUT, 85 – 265 VAC INPUT BUCK CONVERTER D1 BAV21WS-7-F R7 30 k7 Q2 MMST3906 R3 10 k7 R1 4.7 k7 R9 4.7 k7 C4 100 nF 25 V FB L 85 - 265 VAC N RF1 10 7 2.5 W D BR1 MB6S 600 V C1 4.7 MF 380 V L1 1 mH C2 4.7 MF 380 V D2 BAV21WS-7-F C5 100 nF 25 V R6 10 k7 R4 10 k7 Q1 MMST3904 C6 100 nF 25 V BP S R8 27 LinkSwitch-TN U1 LNK306DN R10 12 7 D3 MURS160T3 9-15 V, 300 mA L2 1 mH C3 2.2 MF 25 V R11 1 k7 RTN PI-4986-011708 C13 185 - 265 47 nF VAC 275 VAC F1 3.15 A R13 5.1 kΩ L2 2200 μH L1 2200 μH R14 5.1 kΩ D3, D4 1N4007 C14 220 nF 275 VAC D1, D2 1N4007 D7 1N4007 D5 1N4007 R15 10 Ω 1/2 W C16 6.8 μF 400 V C15 6.8 μF 400 V D13 UF4005 D6 1N4007 R16 100 kΩ 1/2 W S D 3 2 BP/M C16 1 μF 50 V TinySwitch-III U2 TNY279PN EN/UV C4 1 nF 1 kV 1 6 10 U3 PC817A R10 51 Ω D11 1N4148 R12 C12 220 pF 47 Ω 1 kV 1/2 W D9 SB580 VR1 12 V 4 8 C10 100 nF 50 V LM358 1 C9 100 nF 50 V C6 C7 680 μF 680 μF 35 V 35 V U1 C17 100 μF 16 V 3 R11 2 kΩ 1/8 W 2 R5 1 kΩ 1/8 W + C8 2.2 nF 250 VAC U4 TL431 2% PI-4987-011708 R6 68 kΩ 1/8 W R17 5.1 kΩ 1/8 W R11 100 mΩ 1W RTN 10 V, 1.8 A TinySwitch-III – Passive PFC, Constant Current LED Driver (DI-130) 18 W, 10 V, 1.8 A OUTPUT, 185 – 265 VAC INPUT, PASSIVE PFC FLYBACK POWER SUPPLY F1 5A 208 - 277 VAC L1 77 MH RV1 320 VAC C1 100 nF 305 VAC L2 19 mH C18 100 nF 305 VAC D1-D4 RL207 L3 330 MH R2 5.1 k7 C3 220 nF 630 V L4 330 MH R1 5.1 k7 C4 15 MF 450 V S D X C14 100 nF 50 V C R23 10.2 k7 1% F CONTROL L C6 2.2 nF 1 kV 2 3 1 TOPSwitch-GX U1 TOP250YN D6 BYV29-400 D7 FR305 R4 22 7 1W R3 R5 VR1 47 k7 D5 P6KE 100 k7 0.5 W 1N4007 200A 2W 4 5 R8 R6 22 7 1/8 W 300 k7 1/8 W C5 22 MF 16 V D8 1N4148 C7 330 MF 25 V C10 33 MF 25 V R7 24 7 D9 FR103 6,7 Q1 2N3904 T1 EER28 NC 10 8 C9 2.2 nF 250 VAC U2B LTV817A C16 47 MF 35 V R19 10 7 1/8 W R20 200 7 1/8 W C15 47 MF 35 V R21 300 7 1/8 W R12 17 Q2 2N3904 R13 17 1W R11, 0.13 7 R9 150 7 C11, C12 C13 L5 1800 MF R10 10 nF 2.2 MH 35 V 10 k7 50 V D12 1N4003 PI-4979-022008 Q5 2N3906 R18 100 k7 1/8 W D11 DSSK20-015A D10 DSSK20-015A Q3 2N3904 R22 1 k7 1/8 W Q4 2N3906 R14 470 7 R17 1.6 k7 R16 200 7 RTN 24V, 3.125 A VR2 1N5254B 27V U2A LTV817A R15 1 k7 1/8 W C17 150 MF 35 V TOPSwitch-GX – Power Factor Corrected Constant Current LED Driver (DI-136) 75 W, 24 V, 3.1 A OUTPUT, 208 – 277 VAC INPUT, SINGLE STAGE PFC, FLYBACK POWER SUPPLY LinkSwitch-TN – Constant Current Buck Converter LED Driver (DI-172) 9 W, 70 V, 130 mA OUTPUT, 90 – 132 VAC INPUT BUCK CONVERTER 70 V, 130 mA D1 1N4007 L D2 1N4007 L1 5 mH C1 100 nF 275 VAC D3 1N4007 D D4 1N4007 R2 470 7 1/8 W U2A LTV817A L2 1.1 mH C2 22 MF 200 V C5 33 nF 100 V VR2 1N5259B 36 V C4 47 MF 100 V D5 BYV26B F1 1A 108 - 132 VAC N VR1 1N5259B 39 V R5 1 M7 R3 100 7 R4 7.5 7 1/2 W RTN LinkSwitch-TN U1 LNK306PN PI-4988-020908 FB BP U2B LTV817A C3 100 nF 50 V S TinySwitch-III – Non Isolated, Constant Current High Efficiency LED Driver (DI-173) 14 W, 20 V, 0.7 A OUTPUT, 195 – 265 VAC INPUT FLYBACK POWER SUPPLY VR1 C3 P6KE 2.2 nF 200A 1 kV 9 6 3 BR1 MB6S 600 V L C1 10 MF 400 V R3 22 7 C2 10 MF 400 V F1 3.15 A 195 - 265 VAC TinySwitch-III U1 TNY279GN N D EN/UV BP/M R1 1.2 k7 L1 800 MH S C4 1 MF 50 V 11 4 D1 BYG21M D3 30BQ100 20 V, 0.7 A C6 220 MF 25 V D2 30BQ100 C9 1.0 nF 200 V C7 220 nF R6 25 V 51.1 k7 C8 47 MF 25 V R10 5.1 k7 T1 EF16 VR2 BZX55C20 20 V + U2 LM321 Q1 MMBT2222 R5 150 7 R4 10 k7 D4 LL4148 R8 2.4 k7 1% RTN R9 51.1 k7 1% R8A 3.9 k7 1% U3 LM431 2% R7 0.10 7 1% PI-4980-021308 World Headquarters 5245 Hellyer Avenue, San Jose, CA 95138, USA, Main: +1-408-414-9200 Customer Service Phone: +1-408-414-9665, Fax: +1-408-414-9765, Email: [email protected] On the Web www.powerint.com ©2008 Power Integrations. Power Integrations and the Power Integrations logo are registered trademarks of Power Integrations. All rights reserved.