BAV99 Small Signal Diode Features • RoHS compliant package Mechanical Data • Case: SOT-23 Molded plastic • Epoxy: UL94V-O rate flame retardant Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [BAV99] © Bruckewell Technology Corporation Rev. A -2014 BAV99 Small Signal Diode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (TA=25°C unless otherwise specified) Symbol Parameter MIN MAX Unit PD(Ta=25°C) Power dissipation 225 mW IF Forward Current 200 mA VR Reverse Voltage VR 80 V TJ/TSTG Junction and Storage Temperature -55 to +150 °C V(BR) Reverse Breakdown Voltage(IR=100uA) -- V IR Reverse Leakage Current(VR=200V) 0.5 uA 70 Forward Voltage(Test Condition) VF IF=1mA 715 IF=10mA 855 IF=50mA 1000 IF=150mA 1250 CD Diode Capacitance (VR=0V, f=1MHz) Trr Reverse Recovery Time Publication Order Number: [BAV99] mV 1.5 pF 6 nS © Bruckewell Technology Corporation Rev. A -2014 BAV99 Small Signal Diode ■Characteristics Curve FIG.1-REVERSE VOLTAGE VS REVERSE CURRENT BV -1.0 TO 100 uA FIG.2-REVERSE CURRENT VS REVERSE VOLTAGE IR-10 TO 100 V FIG.3- FORWARD VOLTAGE VS FORWARD FIG.4-FORWARD VOLTAGE VS FORWARD CURRENT CURRENT VF-1.0 TO 100 uA VF-0.1 TO 10 mA FIG.5- FORWARD VOLTAGE VS FORWARD FIG.6-TOTAL CAPACITANCE VS REVERSE VOLTAGE CURRENT VF-10-800 mA Publication Order Number: [BAV99] © Bruckewell Technology Corporation Rev. A -2014 BAV99 Small Signal Diode Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [BAV99] © Bruckewell Technology Corporation Rev. A -2014