2SC1623 Silicon PNP Epitaxial Type Transistor Features • High DC current gain:hFE=200TYP (VCE=6.0V,IC=1.0mA). • High Voltage:VCEO=50V • RoHS compliant package Applications NPN Silicon Epitaxial Planar Transistor. Audio frequency general purpose amplifier. Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [2SC1623] © Bruckewell Technology Corporation Rev. A -2014 2SC1623 Silicon PNP Epitaxial Type Transistor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATING @ Ta=25°C unless otherwise specified Symbol Parameter Value Unit VCBO Collector-Base Voltage 60 V VCEO Collector-Emitter Voltage 50 V VEBO Emitter-Base Voltage 5 V IC Collector Current 100 mA PC Collector Dissipation 200 mW Tj,Tstg Junction and Storage Temperature -55 to +150 °C ELECTRICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified Symbol Parameter Test Conditions V(BR)CBO V(BR)CEO Collector-base breakdown voltage Collector-emitter breakdown voltage MIN TYP MAX UNIT IC = 100μA , IE = 0 60 V IC = 1mA , IB = 0 50 V 5 V V(BR)EBO Emitter-base breakdown voltage IE = 100μA , IC = 0 ICBO Collector cut-off current VCB = 60 V , IE = 0 uA IEBO Emitter cut-off current VEB = 5 V , IC = 0 uA hFE DC current gain VCE = 6 V , IC = 1 mA VCE(sat) Collector-emitter saturation voltage VBE(sat) 200 600 IC = 100mA , IB = 10mA 0.15 0.3 V Base-emitter saturation voltage IC = 100mA , IB = 10mA 0.86 1.0 V VBE Base Emitter Voltage VCE = 6 V , IC = 1 mA 0.62 0.65 V fT Transition frequency VCE = 6 V , IE = -10 mA Cob Output capacitance Marking 0.55 VCB = 6 V , IE = 0 f = 1.0MHz CLASSIFICATION OF hFE(1) Rank L4 Range 90 250 MHz 3.0 pF L5 L6 L7 90-180 135-270 200-400 300-600 L4 L5 L6 L7 Publication Order Number: [2SC1623] © Bruckewell Technology Corporation Rev. A -2014 2SC1623 Silicon PNP Epitaxial Type Transistor ■RATINGS AND CHARACTERISTIC CURVES Publication Order Number: [2SC1623] © Bruckewell Technology Corporation Rev. A -2014 2SC1623 Silicon PNP Epitaxial Type Transistor Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [2SC1623] © Bruckewell Technology Corporation Rev. A -2014