Alcatel Line Transformers and POTS Inductors for the DynaMiTe (DMT) Chipset • • • • • Central office or CPE applications Suitable for 8mbps/640kbps ADSL applications Designed to meet IEC-950 isolation and insulation requirements Meets ANSI T1.413 Issue 2, Category 1 and ITU G.lite standards Designed to optimize performance with the Alcatel MTK 20131,MTK 20140,MTK 20150 ADSL chipsets. • Surface mount models available • UL94V-0 materials • ISO 9001 certified supplier Specifications Schott P/N OCL +/- 5% uH 31640 34025 34026 33684 34024 32188 36952 34318 440 102 844 min 440 102 7680 min 440 440 Turns Ratio Chip:Line +/- 2% 1:1:1:1 1:1:2:2 1:2:4.5 CT 1:1:1:1 1:1:2:2 1:2:1.64 CT 1:1:1:1 1:1:1:1 Dielectric Leakage uH DCR Chip Max DCR Line Max Strength Vrms Max Ohms Ohms Mi n 15 0.5 1 1500** 5 0.64 1.16 1500** 1 0.3 0.4 600 15 0.6 1.6 1500** 5 0.25 0.4 1500* 3 2.55 1.95 600 15 0.8 1 1500** 15 0.6 1.6 1500** Configuration / Schematic Application 23x11 THD RM8 THD EP10 THD EP13 THD/A EP13 THD/A EP10 THD EP10 THD/A EP13 SMD CP CO CO CP CO CP CP CP Specifications: POTS Filter Magnetics Schott P/N OCL +/- 5% 32186 32761 32187 32762 32189 32763 33681 33683 234 234 282 282 500 500 91* 96 Turns Ratio Chip:Line +/2% 1:01 1:01 1:01 1:01 1:01 1:01 1:01 N/A IWC Pf Max 5 7 5 7 10 7 5 N/A Dielectric DCR Max Ohms Strength Vrms Mi n 0.67 500 0.67 500 0.95 500 0.95 500 4.1 500 3.8 500 0.7 500 0.42 500 Config / Schematic Function RM4 THD EP13 THD/B RM4 THD EP13 THD/B 9X5 THD EP7 THD/A EP7 THD/A EP7 THD/B AF Trans AF Trans AF Trans AF Trans LF Trans LF Trans AF Trans Ind ucto r Specifications: Common Mode Choke Schott P/N OCL +/- 5% uH 34518 3.3 min Turns Ratio Chip:Line +/- 2% 1:1 Dielectric Leakage uH DCR Chip Max DCR Line Max Configuration Strength Vrms Max Ohms Ohms / Schematic Mi n 0.6 1.0 1.0 650 To ro id SMD Application CO/CPE Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock. Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents. Electrical Specifications Test Criteria 1. These transformers are designed for operating within a temperature range of -40°C to +85°C. All electrical characteristics are reported for operating at 25°C. 2. Inductance (OCL) is measured at 10KHz, 0.1Vrms, IWC is measured at 10KHz, 0.01 Vrms. 3. *Tolerance is ± 10% for OCL. 4. */**Designed to meet UL1950/EN60950 isolation and insulation requirements. 5. 31640 & 33684, have UL1950 approval at 120 Vrms, 200 Vpk/s and BABT EN60950 approval at 250 Vrms. 6. 34024, 36952, 34318 have UL1950/EN60950/BABT approval at 250 Vrms and are reccomended for new designs. 7. For complete parameters of components listed above, request individual specification sheets. All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. © 2001 Schott Corporation 1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com .5 6 0 M A X (1 4 .2 2 ) 6 EP13-THD 23X11 THD .9 4 0 M A X (2 3 .8 7 ) in ch es (mm) 10 10 P IN S: .0 2 4 S q . (0 .6 0 ) .5 6 0 M A X (1 4 .2 2 ) 6 .9 8 4 M A X (2 5 ) in ch es (mm) P IN S : .0 2 8 X .0 4 5 (0 .7 0 X 1 .1 0 ) P IN S: .0 2 4 S q . (0 .6 0 ) 1 .0 2 4 M A X (2 6 ) 1 .0 5 0 M A X (2 6 .6 7 ) 5 RM8 THD in ch es (mm) C LIP P IN S : .0 1 6 x .0 2 8 (0 .4 x 0 .7 ) 1 1 5 R EF : P W B LA Y O U T M O U N TIN G S ID E G R ID : = .1 0 0 (2 .5 4 ) S q . S ch ematic A .5 0 0 M A X (1 2 .7 0 ) 10 1 .6 8 9 M A X (1 7 .5 ) 3 2 L IN E C H IP 98 .1 1 0 M IN (2 .7 9 ) .5 0 0 M A X (1 2 .7 0 ) 7 .1 1 0 M IN (2 .7 9 ) 4 .1 5 0 (3 .8 1 ) .1 0 0 ( 2 .5 4 ) 1 S ch ematic B 1 .4 0 0 (1 0 .1 6 ) 6 5 .8 0 (2 0 .3 2 ) 8 1 P IN S : 4 4 in ch es (mm) 2 P IN S : .0 2 0 S q . (0 .5 1 ) .4 7 M A X (1 1 .9 4 ) 6 11 8 3 1 1 6 1 11 7 5 CHIP 2 8 RM4 THD .3 9 4 M A X (1 0 .0 1 ) in ch es (mm) .3 9 4 M A X (1 0 .0 1 ) P IN S .0 1 7 S q . (0 .4 3 ) .0 2 0 (0 .5 1 ) C LIP P IN S : .0 1 2 .X 0 2 8 (0 .3 0 x 0 .7 0 ) .5 1 2 M A X (1 3 ) .0 3 9 (1 .0 0 ) R EF : P W B LA Y O U T M O U N TIN G S ID E G R ID : .1 0 0 (2 .5 4 ) S q . .4 2 M A X (1 0 .6 7 ) .4 5 0 M A X (1 1 .4 3 ) LINE 2 5 R EF : P W B P A TTER N TO P V IEW G R ID = .1 0 0 (2 .5 4 ) S q . .3 2 7 M A X (8 .3 ) 12 12 9X5 THD in ch es (mm) 5 7 6 5 EP10 THD .1 3 M IN (3 .3 ) 7 9 L IN E 4 C H IP 2 10 .5 0 0 M A X (1 2 .7 ) 10 .1 4 (3 .5 ) GR OUND .1 0 0 (2 .5 4 ) .1 1 0 M IN (2 .7 9 ) 4 2 1 8 3 .2 9 5 (7 .4 9 ) 3 1 2 3 1 2 6 .3 9 0 M A X (9 .9 ) 7 4 6 3 2 5 4 6 5 EP7 THD .4 2 M A X (1 0 .6 7 ) 4 .1 2 M IN (3 .0 5 ) .3 9 0 M A X (9 .9 ) in ch es (mm) 6 P IN S : .0 1 7 S q . (0 .4 3 ) .3 4 M A X (8 .6 4 3 1 S ch ematic A .3 9 M A X (9 .9 1 ) .1 0 0 M IN (2 .5 4 ) 1 4 3 6 .1 0 0 (2 .5 4 ) S ch ematic B 1 .2 0 0 (5 .0 8 ) 4 All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed. If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder. ©2001 Schott Corporation Schott Corporation 1000 Parkers Lake Road Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173 Fax: + (952) 475-1786 Email: [email protected] Web: http://www.schottcorp.com