HVC Series High Resistance, Thick Film Chip Resistors • • • • • • • • Resistances from 10M to 1T Ohms Power Rating 0.05 to 1.5 Watts Resistance Tolerances to ± 0.25% TCR’s to ± 25 ppm/°C Non-Magnetic High Value Thick Film Resistance Element Sizes, 0402, 0603, 0805, 1206, 1210, 2512, 4020 Special High Temperature Version to 300°C (H) (See ordering Information below) SPECIFICATIONS Type 0402 0603 0805 1206 1210 2512 4020 Power Rating ( W )1 0.050 0.1 0.125 0.25 0.35 1.002 1.502 Trimmed 30 75 100 200 300 1000 4000 Untrimmed (> 5%) 60 150 200 400 600 2000 6000 Working Voltage ( VAC ) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C ) Voltage Coefficients Available ( ppm / V ) Resistance Range (Ω) 10M - 100M 5 to 20% 50, 100 500ppm/V 1 to 20% 50, 100 500ppm/V 0.5 to 20% 50, 100 500ppm/V 0.5% to 20% 25, 50, 100 250ppm/V 0.5% to 20% 25, 50, 100 50ppm/V 0.5% to 20% 25, 50, 100 25ppm/V 0.25% to 10% 25, 50, 100 10ppm/V >100M - 500M 5% to 20% 100, 250 1000ppm/V 2% to 20% 100, 250 500ppm/V 2% to 20% 100, 250 500ppm/V 2% to 20% 50, 100, 250 500ppm/V 2% to 20% 50, 100, 250 250ppm/V 1% to 20% 25, 50, 100 50ppm/V 0.5% to 20% 25, 50, 100 25ppm/V >500M - 1G 5% to 20% 250, 500 1000ppm/V 5% to 20% 250, 500 1000ppm/V 5% to 20% 250, 500 1000ppm/V 5% to 20% 100, 250 1000ppm/V 5% to 20% 100, 250 250ppm/V 1% to 20% 100, 250 50ppm/V 1% to 20% 25, 50, 100 25ppm/V >1G - 10G 10% to 30% 2000 2000ppm/V 5% to 30% 500, 1000 2000ppm/V 5% to 20% 500, 1000 2000ppm/V 5% to 20% 500, 1000 2000ppm/V 5% to 20% 250, 500 500ppm/V 2% to 20% 250, 500 100ppm/V 2% to 20% 50, 100 50ppm/V >10G - 100G 10% to 30% 3000 5000ppm/V 10% to 30% 2000, 3000 5000ppm/V 10% to 30% 2000, 3000 5000ppm/V 10% to 30% 1000, 2000 2000ppm/V 5% to 20% 500, 1000 1000ppm/V 5% to 20% 250, 500 250ppm/V 5% to 30% 100, 250 100ppm/V >100G - 1T On Request On Request See HVS See HVS 10% to 30% 1000, 2000 2000ppm/V 10% to 20% 500, 1000 500ppm/V 10% to 30% 500 / 1000 500ppm/V 1) Solder pads must have sufficient heat conduction 2) TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C 3) VCR: typical values, all negative, not for all TCR values available Riedon Inc. 01/15 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page: 8 HVC Series High Resistance, Thick Film Chip Resistors Specification Value Temperature Range -55°C to +155°C (Standard) -55°C to +300°C (High Temperature Version, TCR valid +25°C to +125°C ) Climactic Cetegory 55 / 155 / 56 Solderability 250°C, 3s Max. Soldering Temperature 260°C, 10s Max ∆R Long Term Stability <1 GΩ 1 GΩ - 10 GΩ >10 GΩ Storage 125°C, 1000h <1% <2% <5% Load Life 70°C, 1000h <0.5% <1% <2% Maximum Voltage, 1000h <0.5% <1% <2% Dimensions Type L B D C HVC 0402 / HVC 0402H 0.040 ±0.002 [ 1.04 ±0.05 ] 0.020 ±0.002 [ 0.5 ±0.05 ] 0.012 ±0.002 [ 0.3 ±0.05 ] 0.004 +0.004 / -0.002 [ 0.1 +0.1 / -0.05 ] HVC 0603 / HVC 0603H 0.060 +0.006 / -0.002 [ 1.5 +0.15 / -0.05 ] 0.030 +0.008 / -0.002 [ 0.8 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.008 +0.008 / -0.004 [ 0.2 +0.2 / -0.1 ] HVC 0805 / HVC 0805H 0.080 +0.006 / -0.002 [ 2.0 +0.15 / -0.05 ] 0.050 +0.006 / -0.002 [ 1.25 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] HVC 1206 / HVC 1206H 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.060 +0.008 / -0.002 [ 1.5 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] HVC 1210 / HVC 1210H 0.126 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.098 +0.008 / -0.002 [ 2.5 +0.2 / -0.05 ] 0.020 +0.006 / -0.002 [ 0.5 +0.15 / -0.05 ] 0.032 ±0.008 [ 0.8 ±0.2 ] HVC 2512 / HVC 2512H 0.250 +0.006 / -0.002 [ 6.3 +0.15 / -0.05 ] 0.138 +0.008 / -0.002 [ 3.5 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 ±0.008 [ 0.9 ±0.2 ] HVC 4020 / HVC 4020H 0.400 +0.006 / -0.002 [ 10.2 +0.15 / -0.05 ] 0.200 +0.008 / -0.002 [ 5.1 +0.2 / -0.05 ] 0.024 +0.006 / -0.002 [ 0.6 +0.15 / -0.05 ] 0.035 ±0.008 [ 0.9 ±0.2 ] Packaging: Power Derating Curve Bulk or Blistertape to IEC 60286-3 120 Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value Minimum quantity Tape & Reel / 500 pieces per value (Note: Except size 0402 / 1000 pieces per value) (H er )V 60 40 n ard sio nd Example: HVC 0603 100M Ohms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied) 80 Sta Ordering Information Standard Part Description: Part Type - Resistance - Tolerance - TCR Power ( % ) 100 20 0 0 High Temperature Part Description (H): Part Type H - Resistance - Tolerance - TCR 50 100 150 200 250 300 350 Ambient Temperature (°C) Example: HVC 0603H 100M Ohms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied ) Riedon Inc. 01/15 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page: 9